slartibartfast wrote:
> Have you turned off the swapfile completely?. I set mine to normal
> performance and during a "new and changed" scan 6MB of available swap
> was used when 28MB of RAM was still free.
>
> Sent from my SM-G900F using Tapatalk
No, I leave my swapfile enabled, just in
frankd wrote:
> Actually, it is even faster as no swapping is needed which slows down
> the raspberry due to the low throughput of the SC-Card.
> And during regular usage of LMS I couldn't find any difference in
> performance so far.Have you turned off the swapfile completely?. I set mine
> to
paulgizmo wrote:
> This is happening to me on LMS installs on 2 Raspberry Pis now with LMS
> 7.9.1~1511211491 & Spotty 1.99.0
> Just started happening on my stable setup (installed around the end of
> Spotify official plugin) and my networking hasn't changed, cable
> connected RPis and Wi-Fi
I have been running 1.99.3 now for more than a week.
We mainly use Connect using iOS Spotify app to control music.
Here is a summary of issues I have seen.
I mention these if you wish to improve...
Switching between family acounts works great by using spotty from iPeng,
this works rock solid.
slartibartfast wrote:
> How much longer does a scan take with the "normal" setting?
>
> Sent from my SM-G900F using Tapatalk
Actually, it is even faster as no swapping is needed which slows down
the raspberry due to the low throughput of the SC-Card.
frankd wrote:
> I think I found the reason for high memory usage while importing MusicIP
> fingerprints in my setup:
> If in the LMS performance settings high memory settings are used
> (advanced - performance - database memory), the MusicIP important
> requires significantly more memory.
slartibartfast wrote:
> I have increased the swap file to 500MB which seems to be just enough to
> complete a "new and changed" scan. It look as though the RAM used after
> the scan is completed is much higher than a newly booted system and
> remains high. Another "new and changed" scan causes
mherger wrote:
> > I have a TS-251A with Celeron N3060 X86-64. Some questions: 1) Since
> I
> > currently use SSOTS, will using DIGIMASTER package use same install
> > location? 2) If so, will SSOTS cause problems if not uninstalled? 3)
> In
> > App Center I have LMS listed as 7.7.2 but it
Learned Colleagues:
I'm running my Squeezebox Duet off of a Linux NAS which can only handle
LMS 7.7.3 or older versions. Will Spotty 1.9X work or am I subjecting
myself to a painful gesture of futility?
Thanks!!
philippe_44 wrote:
> You're right, I mean the 'stop' happens when you clean the playlist (in
> other cases as well, but that's details). So I'm changing that now so
> that in pause, the group is broken up as well.Nice work. Version. 0.1.4 is
> much more user friendly. Groups break up on
pause
dlpucci wrote:
> Learned Colleagues:
>
> The idea of scrolling through 61 pages of posts is daunting. I have a
> really old setup, in that I got my Squeezebox Duet back in 2008 and am
> running it off of an older LINUX NAS that only supports up to LMS 7.7.3.
> Can I use this Spotify Protocol
dlpucci wrote:
> Learned Colleagues:
>
> The idea of scrolling through 61 pages of posts is daunting. I have a
> really old setup, in that I got my Squeezebox Duet back in 2008 and am
> running it off of an older LINUX NAS that only supports up to LMS 7.7.3.
> Can I use this Spotify Protocol
Learned Colleagues:
The idea of scrolling through 61 pages of posts is daunting. I have a
really old setup, in that I got my Squeezebox Duet back in 2008 and am
running it off of an older LINUX NAS that only supports up to LMS 7.7.3.
Can I use this Spotify Protocol Handler and the Logitech's
BPA
bpa wrote:
> Please repeat the question here - I'm not going to hunt for a post
> amongst a load of other posts which I found by accident.
> .
The question does not relate to the BBCiPlayer or to the Logitech
Squeezebox. It relates to Applian's Replay Media Catcher and how to
schedule with
slartibartfast wrote:
> In the web UI from the player list at the top of the right pane.
> Synchronize is at the bottom of the list.
>
> Sent from my SM-G900F using Tapatalk
Thanks, Yes I did that momentary lapse of thinking !! :)
*Players:* SliMP3,Squeezebox3
philippe_44 wrote:
> The groups breaks up as soon as you stop playing or the track ends. In
> this version, it does NOT break up when you *pause* the virtual playerI see.
> How would I stop playing as an alternative to pausing? Pause is
the only option in Orange Squeeze. I tried long pressing
Jeff07971 wrote:
> That's probably a problem as neither the LMS Web GUI nor the SB3 remote
> have a "Stop" button. I do see the reasoning though !
You're right, I mean the 'stop' happens when you clean the playlist (in
other cases as well, but that's details). So I'm changing that now so
that
philippe_44 wrote:
> The groups breaks up as soon as you stop playing or the track ends. In
> this version, it does NOT break up when you *pause* the virtual player
That's probably a problem as neither the LMS Web GUI nor the SB3 remote
have a "Stop" button. I do see the reasoning though !
Jeff07971 wrote:
> How did you do that ?In the web UI from the player list at the top of the
> right pane.
Synchronize is at the bottom of the list.
Sent from my SM-G900F using Tapatalk
slartibartfast's Profile:
slartibartfast wrote:
> If I have a group consisting of two Radios how do I cause this group to
> break up when I stop play. They seem to remain in a sync group. If I try
> to play to one of the Radios both play. I think I must be missing
> something basic.
>
> Sent from my SM-G900F using
slartibartfast wrote:
> I had to manually unsynchronize both players to return to the normal
> state.
>
> Sent from my SM-G900F using Tapatalk
How did you do that ?
*Players:* SliMP3,Squeezebox3 x3,Receiver,SqueezeLiteX,PiCorePlayer
x3,Wandboard
*Server:* LMS Version: Latest Nightly on
Jeff07971 wrote:
> Hmmm I just tried this with mine. (V0.1.3)
>
> I had just stopped the "Group" all players had powered off. When I
> played BBC Radio 1 live on "Lounge" it started playing. The playlist on
> all 3 of the group were synced IE BBC Radio 1 Live but only "Lounge"
> playing.
>
slartibartfast wrote:
> If I have a group consisting of two Radios how do I cause this group to
> break up when I stop play. They seem to remain in a sync group. If I try
> to play to one of the Radios both play. I think I must be missing
> something basic.
>
> Sent from my SM-G900F using
I have a TS-251A with Celeron N3060 X86-64. Some questions: 1) Since I
currently use SSOTS, will using DIGIMASTER package use same install
location? 2) If so, will SSOTS cause problems if not uninstalled? 3) In
App Center I have LMS listed as 7.7.2 but it stops and starts my current
version
If I have a group consisting of two Radios how do I cause this group to
break up when I stop play. They seem to remain in a sync group. If I try
to play to one of the Radios both play. I think I must be missing
something basic.
Sent from my SM-G900F using Tapatalk
earthbased wrote:
> I have a TS-251A with Celeron N3060 X86-64. Some questions: 1) Since I
> currently use SSOTS, will using DIGIMASTER package use same install
> location? 2) If so, will SSOTS cause problems if not uninstalled? 3) In
> App Center I have LMS listed as 7.7.2 but it stops and
I have updated the plugin - thanks for that
> After using a group you cannot use synchronize on any former member of
> that group (do not appear in Sync menu in GUI) until the player is power
> cycled (software via LMS GUI) this may be due to my use of Syncoptions
> I can't reproduce that. Can
mherger wrote:
> > Thanks for the pull request, I'll merge it today. Do you think you
> could
> > have a look at the small change I've suggested in LMS (see my message
> on
> > the développer part of this forum)?
>
> Could you point me to the posting? I didn't see any suggestion...
>
> --
>
I tried to generate a log showing as a trace of what happens - but only
very basic info went into the log.
I did enabled DEBUG under Advanced/Logging and also set it to ALL in the
plugin settings (and restarted the plugin).
Also - I saw a Generate button had appeared. So clearly it can appear. I
Man in a van wrote:
> You might need to also read this
>
> http://forums.slimdevices.com/showthread.php?108292-LogitechMediaServer-for-Qnap-x86_64-with-qts-4-2-or-higher
>
> Ronnie
>
> If it is arm based NAS, then a pi is the better option and easiest to
> maintain.
>
> Ronnie
I have a
Thanks for the pull request, I'll merge it today. Do you think you could
have a look at the small change I've suggested in LMS (see my message on
the développer part of this forum)?
Could you point me to the posting? I didn't see any suggestion...
--
Michael
pinkdot wrote:
>
> Also a cleaned up and updated version of the Synology x86_64 (DSM6.x)
> can be found on SourceForge.
>
Cool. Thanks a lot :-)
*/Stig*
'www.*rockland*.dk' (http://www.rockland.dk) -
'www.*last.fm*/user/rockland' (https://last.fm/user/rockland) -
mherger wrote:
> Overall this is looking great! I'm still facing an issue I've mentioned
> a few days ago due to a sprintf() expression and my oldish Perl version.
>
> But I've sent you a pull request which fixes this.
>
> One more "issue" I'm having is the terminology. The settings pages are
Hi Michael,
Would you please send me the zip file as well? Keen to get this plugin
re-installed on my squeezecenter.
Thanks,
David.
davidallan73's Profile: http://forums.slimdevices.com/member.php?userid=67668
View this
Overall this is looking great! I'm still facing an issue I've mentioned
a few days ago due to a sprintf() expression and my oldish Perl version.
But I've sent you a pull request which fixes this.
One more "issue" I'm having is the terminology. The settings pages are
talking about "static
mherger wrote:
> >> What 7.9.1 build are you using? I did apply a change about five
> weeks
> >> ago which fixes the problem for me. Downloading and installing
> Erland's
> >> plugins is working fine for me.
> >
> > Logitech Media Server Version: 7.9.1 - 0.6.20170928git1508251793 @
> Tue
> >
36 matches
Mail list logo
