pippin wrote:
> Can you somehow give me a way to test this?
> This is horribly complicated. iPeng needs to be compatible with a
> plethora of LMS versions so I can't just change the behavior for new
> setups or something and the behavior of XMLBrowser is pretty messy.
> It's all a consequence of
mikeybs wrote:
> Thank you for your response philippe. And thank you very much for all of
> your hard work on this plugin. It is greatly appreciated.
>
> I'd love to read the explanation, if you could give me the date and time
> it took place on this thread I will go check it out.
>
> Is there
mamema wrote:
> it's the logging of the plugin. Enable full debug logging (all)
>
> here is a snippet with replay gain stuff
>
> [18:50:49.107979] MasterHandler:1036 [0xc41940]: subscribe success
> [18:50:49.108843] process:500 [0xbb9f80] strm
> [18:50:49.108859] process_strm:241 [0xbb9f80] st
I have updated the 4.1 beta source files in GitHub with the zone fix
Chris
Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876
View this thread: http://forums.slimdevices.com/showthread.php?t=60114
SamY wrote:
> Okay. It actually has nothing to do with what version of the plugin you
> are using. It does have to do with what firmware your AVR is using
> though. Only the newer models react this way to a PWON command. My
> AVR-3311ci (circa 2009) doesn't exhibit this behavior. Anyway, I have
New firmware 8.0.1 r16855 installed today on all Touch and Radio. Has
the issue with Radio dropping wifi been addressed? Thanks.
Apesbrain's Profile: http://forums.slimdevices.com/member.php?userid=738
View this thread:
madpatrick wrote:
> Hi SamY,
>
> First test looks good.
> AVR is switching On/Off with the plugin and Z2 is not On.
>
> Appreciate your swift fix and effort very much !!
> Great Job
Glad to hear that, Patrick. Thanks again for your help.
Sam
NeverSimple wrote:
> Right now the 'Now Playing' info for the Mellow FLAC regular stream is
> 'stuck' again for at least a couple of hours. It is stuck on 'Ray
> LaMontagne, In My Own Way'. As before the other 'Mellow' streams are
> fine, as are all the main mixes.
> If I listen to something dif
brann wrote:
> At the bottom of my iPhone screen there is a white bar (no button on
> this iPhone...) which hides a part of the menu.
This is normal. Look at some other apps. There you will see the same.
pi4 4gb picoreplayer with lms and squeezelite for usb inside an argon
one case
pi3b+ (7\
NeverSimple wrote:
>
>
> So don't know what happened but I'll keep an eye on it. Thanks for
> checking it.
Right now the 'Now Playing' info for the Mellow FLAC regular stream is
'stuck' again for at least a couple of hours. It is stuck on 'Ray
LaMontagne, In My Own Way'. As before the other
Bad diagnostic on my side!
I have 3 AP with the same SSID and it seems that the PI didn't catch the
better ones :-(
I restart the nearest AP and the PI and now it is OK
Thanks all of you :-)
pascal!'s Profile: http://forum
Great skin, thanks! I didn't know it until today... It seems to work
fine on all my phones/laptops/tablets.
However on my iPhone Xs, I have a small defect, maybe due to the iPhone
itself! At the bottom of my iPhone screen there is a white bar (no
button on this iPhone...) which hides a part of th
SamY wrote:
> Okay. It actually has nothing to do with what version of the plugin you
> are using. It does have to do with what firmware your AVR is using
> though. Only the newer models react this way to a PWON command. My
> AVR-3311ci (circa 2009) doesn't exhibit this behavior. Anyway, I have
afriend wrote:
> So I've compiled musly on macOS 10.15. No errors, some deprecation
> warnings (libavformat and such...).
Sorry, I don't use macOS - so really can't help much. If/when you get
this working, I have moved the LMS side from 'lms-muslymixer'
(https://github.com/CDrummond/lms-muslymi
al. wrote:
> I'm having the same issue with ZONE 2 powering on sporadically since ver
> 2.3 i think
> I'm attaching debug log using ver 4.0
>
> my denon receiver model is AVR-S740H
> daphile ver. 21.01
Okay. It actually has nothing to do with what version of the plugin you
are using. It does
slartibartfast wrote:
> Did you try my last suggestion?
> https://forums.slimdevices.com/showthread.php?p=1019859
Yes, thanks. Checking the box to enable monitoring of the Spotty Helpers
does not change the behavior.
The Spotty Helpers are in my case restarted even without this checkbox.
In the
loopguru wrote:
> I'm still fighting with crashing daemons after upgrading to LMS v8.1.1.
> Considering now to roll back to 7.9.
>
> How I can reproduce:
> > > >
- Start LMS
- Switch LMS to Spotty debug mode
- Switch iPhone in Spotify to Squeezebox Radio: Works as expected
- Switch
So I've compiled musly on macOS 10.15. No errors, some deprecation
warnings (libavformat and such...).
But when I try to run anything Python3 I get
> ./musly-server.py --analyse /Users/defuser/Music/MEDIA/
> Traceback (most recent call last):
> File "./musly-server.py", line 33, in
> mus = musl
mherger wrote:
> > I'm using LMS 7.9.1 and BC 1.8.4 (although I only updated the plugin
> > from the previous version this morning)
>
> Anything in server.log?
No errors but I had a look at the log with debug on for the plugin and I
can see that where I presume it is supposed to be reading an
philippe_44 wrote:
> Can you show me what log so I can check?
it's the logging of the plugin. Enable full logging
here is a snippet with replay gain stuff
[18:50:49.107979] MasterHandler:1036 [0xc41940]: subscribe success
[18:50:49.108843] process:500 [0xbb9f80] strm
[18:50:49.108859] process
mamema wrote:
> ah okay, i've seen it in the debug logs of UPnPBridge and thought they
> get applied
Can you show me what log so I can check?
LMS 8.2 on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet, 1xTouch,
1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW,
2xChromec
Cebolla wrote:
> It's essentially the same list of UPnP services, presumably screenshot
> from Auralic's Lightning DS app, that you already posted on the main
> UPnP/DLNA Bridge thread and I replied to:
> https://forums.slimdevices.com/showthread.php?103728-Announce-UPnPBridge-integrate-UPnP-DLN
philippe_44 wrote:
> ReplayGain is only applied in full processing mode (when audio is
> decoded and reencoded) and only if instructed to by LMS. The gain is a
> parameter in the message sent by LMS to start a track so the bridge
> cannot invent it if it is not there.
ah okay, i've seen it in t
I'm having the same issue with ZONE 2 powering on sporadically since ver
2.3 i think
I'm attaching debug log using ver 4.0
my denon receiver model is AVR-S740H
daphile ver. 21.01
+---+
|Filename: server.log.zip
mamema wrote:
> i've learned that UPnPBridge applies Replay Gain. I've disabled this in
> the LMS settings, which is ignored by UPnPBridge. Can this please be
> implemented, so if it is disabled in LMS, then it is also disabled in
> UPnPBridge?
ReplayGain is only applied in full processing mode
Hi. i'm using a Denon AVR X4000 with three zones. I only use the main
zone. When i'm turning on for example the AVR with Ipeng all three zones
become active altough zone 2 and 3 have been switched off.
lalu01's Profile: ht
I'm still fighting with crashing daemons after upgrading to LMS v8.1.1.
Considering now to roll back to 7.9.
How I can reproduce:
- Start LMS
- Switch LMS to Spotty debug mode
- Switch iPhone in Spotify to Squeezebox Radio: Works as expected
- Switch iPhone back to iPhone audio: iPhone cont
pfew... i was already doubting it was only me with the problem.
I was laready looking to switch back to version 2.3 or 3.0 to test.
-
Patrick
madpatrick's Profile: http://forums.slimdevices.com/member.php?userid=4929
View
SamY wrote:
> It's my opinion that the behavior you are seeing has nothing to do with
> the plugin. I would suggest looking around on the Denon forums for info
> regarding zone behavior. If you're not using Zone 2 at all, you can
> disable it. Here are a couple of things to look at:
>
> https:/
I think I've fixed the Search issue. I'll look into the second issue
later tonight/this weekend.
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
madpatrick wrote:
> LMS version : 8.1.1 - 1610364019 @ Thu Jan 14 06:20:31 CET 2021
> SB touch : Firmware: 8.0.1-r16844
It's my opinion that the behavior you are seeing has nothing to do with
the plugin. I would suggest looking around on the Denon forums for info
regarding zone behavior. If you
i've learned that UPnPBridge applies Replay Gain. I've disabled this in
the LMS settings, which is ignored by UPnPBridge. Can this please be
implemented, so if it is disabled in LMS, then it is also disabled in
UPnPBridge?
nimnul wrote:
> This is a break out thread from the general UPNP bridge Thread.
>
> Paul Webster have been assisting me to get info from the Aurelic's
> (propritary UPNP/ Openhome) communication.
>
> As per Paul's instruction here are the XML files from Squeezelite
> (working) and Auralic (No
slartibartfast wrote:
> One option is to keep the library integration but turn off the automatic
> scanning.[/IMG]
>
> Sent from my Pixel 3a using Tapatalk
Sorry for late reply, but thanks a lot for pointing this out. In effect
it keeps Spotify scanning in sync with my nightly local library
sc
mamema wrote:
> just for the records, i've got my auralic working with the airplay
> bridge
I think that nimnul did as well (at least with the earlier trial model)
but getting UPnP working brings the potential for higher bitrates.
Whether or not higher rates will improve what is heard is a ques
just for the records, i've got my auralic working with the airplay
bridge
mamema's Profile: http://forums.slimdevices.com/member.php?userid=44662
View this thread: http://forums.slimdevices.com/showthread.php?t=114489
___
Hi Greg
The ping was a good hint! Thanks!
The ping I gave was from a WIFi PC to the PI Zero
I did other measures from a PI on Ethernet
I've got around 5ms, not so good as yours (I've not longer have the
results) but as good as another PI ZERO I have a little bit further from
this AP.
But when I
It's not a minor change to implement something like Spotify Connect or
Tidal Connect but Qobuz are behind their competitors in not having a
"connect" option.
coyrls's Profile: http://forums.slimdevices.com/member.php?useri
I'm using LMS 7.9.1 and BC 1.8.4 (although I only updated the plugin
from the previous version this morning)
Anything in server.log?
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
Quick thought ... does it work with the Media Controller part of the
UPnP tools?
Plus - don't forget the UPnP Bridge logs with UPnP tracing turned on.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute
This is a break out thread from the general UPNP bridge Thread.
Paul Webster have been assisting me to get info from the Aurelic's
(propritary UPNP/ Openhome) communication.
As per Paul's instruction here are the XML files from Squeezelite
(working) and Auralic (Not working)
My knowledge on h
OK - so it does show some UPnP attributes.
Enable UPnP logging via the bridge settings page (don't forget to click
Apply at the bottom) and see if there are any clues.
Restart the bridge when making changes.
Compare the top level info for the device that is detected against the
one that is not.
Working renderer (Picoreplayer)
34472
Auralic (not discovered)
34473
+---+
|Filename: device spy2.JPG |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=34473|
+--
I'm having two issues which may or may not be connected but were
definitely not happening last week. Firstly, search is no longer working
correctly for me. I've tried searching for various things that are no
longer appearing. I tried selecting things from "Recent Searches" that
no longer give m
Paul Webster wrote:
> If you did the standard install on Windows then you should have a
> program group (under Start) called
> Developer Tools For UPnP
> in there should be "Device Spy"
> If you just installed it then you might find it at the top of the Start
> list - otherwise scroll down throu
mamema wrote:
> have this in the logs today:
>
> [21-04-29 09:51:04.8337] Slim::Networking::Repositories::__ANON__ (147)
> Failed to fetch https://www.nexus0.net/pub/sw/lmsdboptim/repo.xml:
> Connect timed out: Inappropriate ioctl for device
> [21-04-29 09:51:04.8340] Slim::Plugin::Extensions::
mherger wrote:
> > That would have been great to have such a feature for Qobuz! Couldn't
> we
> > ask this to Qobuz teams?
> Qobuz unfortunately isn't as developer friendly as they used to be. I
> don't even have access to their documentation any more, as I'm not a
> company. They wouldn't sup
Aesculus wrote:
> I took a quick pass over it and can find nothing in the logs that
> indicated anything but the main zone was dealt with.
>
> Small note: Here you said Z1 but above you said Z2. But none the less,
> no zone requests in the log.
>
Sorry. Z1 = Z2. I have only 1 zone ;-)
>
> He
If you did the standard install on Windows then you should have a
program group (under Start) called
Developer Tools For UPnP
in there should be "Device Spy"
If you just installed it then you might find it at the top of the Start
list - otherwise scroll down through the alphabetically sorted list
Paul Webster wrote:
> Does it show up in DeviceSpy (see earlier)?
>
> If yes - then trying to work out the difference in the discovery request
> between the two could be the next step.
Hi Paul. OK my new unit is set up and I have MeshCommander running, but
I cant find "Device Spy" What am I mi
50 matches
Mail list logo