It is this thing:
Compal CH7465LG
And maybe it is not an issue once you have full control but I think most
functionality is turned off by the ISP.
Now that everything is running I will most likely have it set to bridge
mode to avoid clashes with multiple DHCPs etc...
Mercenary wrote:
> Hi,
> no. The pCP and the Synology were wired to the router and they are now
> to the old router.
>
> Music is playing :)
It sounds as if that new router had some sort of firewalling on the
internal network or it was just plain rubbish. I dont think they are
sold here.
Hi,
no. The pCP and the Synology were wired to the router and they are now
to the old router.
Music is playing :)
3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2 SB Duet, 1pi with
picoreplayer, server and music on Synology DS718+
library ~50.000 titles
Is you pCP on WiFi?
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB Boom
*Kitchen* UE Radio (upgraded to SB Radio)
*Bedroom (Bedside)* Pi Zero+DAC
d6jg wrote:
> The %2 s should not be there. Type the mount point in dont paste it
Unfortunately that was not it either. After typing it pcP just said that
nothing had changed so I guess it was "correct" before.
But I managed to get it working.
I got totally fed up by the behaviour of the new
Mercenary wrote:
> Hi Paul,
> thanks.
>
> So here is what I did.
>
> 1. install pcp 8
> 2. remove all the permessions in the Synology NAS
> 3. remove the mount in pcp
> 4. restart pcp and also in the meantime restart the NAS
> 5. wait for a decent time (10 minutes) - NAS was NOT hibernating
paul- wrote:
> The NAS must be fully up and running before pCP boots. If power outages
> are common. You can increase the boot wait time where you setup the
> network mounts on the pCP interface
Hi Paul,
thanks.
So here is what I did.
1. install pcp 8
2. remove all the permessions in the
The NAS must be fully up and running before pCP boots. If power outages
are common. You can increase the boot wait time where you setup the
network mounts on the pCP interface
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
I have rebooted it many times today but will give it another try with
exactly the right order.
I am sure this had solved the issue before but today it did not seem to
work.
Thanks. Will feedback if it worked tomorrow.
3 * Boom, 1 * Radio, 1 * Touch, 1 SB Classic, 2
PS default IP of a Fritzbox is 192.168.178.1 which is a slightly obscure
choice
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB Boom
*Kitchen* UE Radio
Mercenary wrote:
> Your bet is wrong unfortunately :)
> I can get to the mount but cannot see any files.
>
> What do I need to change and why did this change in the first place? It
> worked until this afternoon when I had to power off my equipment due to
> some electrical installation work.
d6jg wrote:
> File permissions then.
> If you ssh onto pCP can you access the mount and read the files?
>
> Edit. Im betting you have a Fritzbox
Your bet is wrong unfortunately :)
I can get to the mount but cannot see any files.
What do I need to change and why did this change in the first
Mercenary wrote:
> Ok, no problem, if this helps.
>
> Router: 192.168.178.1
> Nas: 192.168.178.48
> pcp: 192.168.178.157
>
> The mounted folder is showing up in LMS but the scan does not pick up
> any files.
>
> 35425
File permissions then.
If you ssh onto pCP can you access the mount and
d6jg wrote:
> More info required
> For example what are the IP addresses of
> The router
> pCP
> NAS
Ok, no problem, if this helps.
Router: 192.168.178.1
Nas: 192.168.178.48
pcp: 192.168.178.157
The mounted folder is showing up in LMS but the scan does not pick up
any files.
More info required
For example what are the IP addresses of
The router
pCP
NAS
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB Boom
*Kitchen* UE Radio
15 matches
Mail list logo
