jasc wrote:
> Hi, for what it's worth, I am using UPnPBridge with a Linn Majik DSM,
> 2015 Variant, with firmware 'Davaar 80 Build 391 (4.80.391)'
> (https://docs.linn.co.uk/wiki/index.php/ReleaseNotes) released on 10 Dec
> 2020 with few issues. The device appears as in UPnPBridge as available.
nimnul wrote:
> Very interesting, but my Auralic doesnt show up as a discovered player
> at all.
It's probably some issues with your firewall and network configuration.
Try w/o any firewall to confirm that something can be detected. Also,
refer to post #1 of this thread and the user's guide
wildgoose wrote:
> I need to figure out how to transcode 24bit flac to 16bit when sending
> it to my Yamaha receiver.
>
> Running on PI3 using PCP 7.01 and LMS 8.1.1.
>
> I tried a few settings under "Transcode", but it's not working. I guess
> I don't understand the option too well.
>
>
slartibartfast wrote:
> I'll do it in the morning.
>
> Sent from my Pixel 3a using Tapatalk
- Is this the live of replays? (they are all empty for me)
- Have you tried with normal HTTP handling
- It might be an issue with URL redirection. There was a difficult issue
that I think I've solved
I need to figure out how to transcode 24bit flac to 16bit when sending
it to my Yamaha receiver.
Running on PI3 using PCP 7.01 and LMS 8.1.1.
I tried a few settings under "Transcode", but it's not working. I guess
I don't understand the option too well.
Transcode: None | Flac | PCM | MP3
What should I log to.help find the issue?
Sent from my Pixel 3a using Tapatalk
slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609
View this thread:
slartibartfast wrote:
> What should I log to.help find the issue?
>
> Sent from my Pixel 3a using Tapatalk
set player.streaming.remote and player.source at info (at least)
LMS 8.2 on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet, 1xTouch,
1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603,
slartibartfast wrote:
> Every time? They don't for me playing to a Touch synced with a pCP
> 7.01.
>
> Sent from my Pixel 3a using Tapatalk
Haven't got a Touch available at the moment...kids
sleeping:rolleyes: but a Squeezebox Radio with a pCP 7.0.1 squeezelite
instance synced, do play
gegen wrote:
> Haven't got a Touch available at the moment...kids
> sleeping:rolleyes: but a Squeezebox Radio with a pCP 7.0.1 squeezelite
> instance synced, do play instantly each time. Can check tomorrow with a
> Touch synced to the pCP 7.0.1.:cool:
Am using the 64bit pCP 7.0.1 if that
philippe_44 wrote:
> set player.streaming.remote and player.source at info (at least)I'll do it in
> the morning.
Sent from my Pixel 3a using Tapatalk
slartibartfast's Profile:
==> LMS request track 1 to play
[22:59:21.349246] sq_callback:342 [0xc41940]:
title:I Think I Love You
==> bridge tells Sonos where to find it
[22:59:21.349490] AVTSetURI:91 [0xc41940]: uPNP setURI
http://192.168.1.10:48671/bridge-1.flac (cookie 0x1)
==> bridge
FatPete wrote:
> One more test before I go to bed: dev2 is still skipping,
> unfortunately.
>
> I Think I Love You played through
> Look At Me skipped after a millisecond
> Beauty To My Eyes played back okay (I stopped playback manually after a
> short time to retrieve logs for you).
>
> Log
Would it be possible for the creator of this Plugin to make a version of
this plug in that makes OpenHome compatible devices pop up in LMS?
That would be brands like Linn, Auralic, Lumin Cambridge Audio(?) and
many more.
I believe availible info can be found here:
Paul Webster wrote:
> go to /Default instead of /Material
> and/or change setting in LMS
> Setting/Interface/Web interface
Hi Paul
thanks a lot.. it worked fine
Br
Caad
Caad's Profile:
Well, i didnt work out the use of that.
nimnul's Profile: http://forums.slimdevices.com/member.php?userid=13492
View this thread: http://forums.slimdevices.com/showthread.php?t=103728
"The OpenHome platform comprises full Renderer and ControlPoint stacks
which are based on UPnP services but both extended and simplified to
provide a richer, more robust and interoperable environment for
networked audio playback."
So I think the challenge would be to work out the differences
It doesnt show up in UPNP Bridge at all.
nimnul's Profile: http://forums.slimdevices.com/member.php?userid=13492
View this thread: http://forums.slimdevices.com/showthread.php?t=103728
Hi All,
I did try the material skin but don't like it so i would like to return
to LMC menu, but it seams not possible from Material skin or did i miss
the right menu in the Material skin?
Br
Caad
Caad's Profile:
I'm getting this message at the top of my LMS > Settings > Plugins page.
I have the repo entered at bottom of page. "Reliable" Ver. 0.18.1 does
show as installed however. Running LMS 8.1.1, and rPi 7.0.1. Extensions
that @mherger mentioned above (when I earlier had a similar issue) do
show as
cparker wrote:
> Take a look at filters, its a very powerful feature you can virtually
> slice your library, stack genres together and/or artists or various
> combinations. Then just select the filter in SugarCube to use.
>
> More detail here;
Often happens with sourceforge
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla
finland, abc australia, cbc/radio-canada and rte ireland
Does it show up in DeviceSpy (see earlier)?
If yes - then trying to work out the difference in the discovery request
between the two could be the next step.
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss,
go to /Default instead of /Material
and/or change setting in LMS
Setting/Interface/Web interface
Paul Webster
http://dabdig.blogspot.com
author of \"now playing\" plugins covering radio france (fip etc),
planetradio (bauer - kiss, absolute, scala, jazzfm etc), kcrw, supla
finland, abc
Launch DeviceSpy ...
and then the first thing it does is list all of the UPnP devices that it
can find.
It shows over 30 here - in about 10 seconds.
Some more on the differences between UPnP-AV and OpenHome
https://yabb.jriver.com/interact/index.php?topic=93866.0
Paul Webster
nimnul wrote:
> *These services are live on my renderer and these ports are used*
That list is showing only two, -ConnectionManager- & -RenderingControl-,
out of the *three* UPnP services normally supported by a standard UPnP
renderer - the -AVTransport- service is missing.
Have you not
First i want share my happiness with this plugin. It works great and
makes life a lot easier.
Maybe ive missed something on the development or on the forum, but is
it correct that when i change the volume on my squeezebox, volume of the
AVR is also changing ?
I mean literally. The volume number
I understand what you are saying, and your example is helpful.
I think perhaps I have been misunderstanding the nature of this
particular encoding error. I had understood it to be an error in
encoding some audio at an arbitrary and random timecode. What I now
speculate may be happening is
madpatrick wrote:
> First i want share my happiness with this plugin. It works great and
> makes life a lot easier.
>
> Maybe ive missed something on the development or on the forum, but is
> it correct that when i change the volume on my squeezebox, volume of the
> AVR is also changing ?
> I
Paul Webster wrote:
> "The OpenHome platform comprises full Renderer and ControlPoint stacks
> which are based on UPnP services but both extended and simplified to
> provide a richer, more robust and interoperable environment for
> networked audio playback."
>
> So I think the challenge would
benh wrote:
> This suggests to me that the payload of the misencoded file is intact
> and that the error is in a container structure.
I checked out the container structure of the 1-13_Last_Kiss.m4a file and
it was OK.
Which is the file that ffmpeg throws up an error ? I'll check it out.
By amazing coincidence, that error above is from 1-13_Last_Kiss.m4a.
The error plus the bit immediately after, when the session ends:
[alac @ 0x56149523bc40] invalid samples per frame: 0/s speed=80.7x
Error while decoding stream #0:0: Invalid data found when processing
input
size=5876kB
FatPete wrote:
> Good question, and from what I can tell I don't think so. Reason being
> that my Move is still on 13.0.0 which I'd updated to when it was first
> released around 5 weeks ago. The iOS controller has had a few updates
> since then (currently 13.0.5) which quite often also
Every evening at 23.45 and start every morning at 09.20
Peet's Profile: http://forums.slimdevices.com/member.php?userid=44328
View this thread: http://forums.slimdevices.com/showthread.php?t=114448
philippe_44 wrote:
> Can you use the 1.49.14-dev1 version and tell me if it fixes the issue?
>
> (it's on the *dev* repository, so see post #1 if you don't have access
> to it yet)
It seems to have gone completely mental now ;) Plays a few seconds of
each track then skips to next for all
Hi Greg
In 'Card Control' there is a possibility to enable/disable the
headphone op the Pi but not of the leds.
When do you expect version 8?
Is it possible with Cron to set off the leds. And what is then the
syntax ( I'm not a Linux user).
We don't have a timeline for pCP8.0.0. It's just a matter of when it is
good enough for users.
The command to turn the leds off depends on which model RPi you have.
The command to turn the leds off depends on which HAT you have.
Hmm I just updated the reliable plugin and see this. Is this related to
the new http(s) caching setting in LMS 8.2?[image:
https://uploads.tapatalk-cdn.com/20210425/e167e42823da75b94b83269b48440be3.jpg]
Sent from my Pixel 3a using Tapatalk
antoniodelrio wrote:
> Hi,
> is there any way to send a mono stream to a upnp player. I see that
> SBoxes have an option under audio settings, but no option for upnp
> players.
>
> Thanks!!
> Antonio
Mono channel is not support on UPnP and Cast bridges as synchronisation
is not supported
FatPete wrote:
> It seems to have gone completely mental now ;) Plays a few seconds of
> each track then skips to next for all tracks. LMS gives the following
> errors in Server.log:
>
> [21-04-25 21:29:07.7518] Plugins::UPnPBridge::Squeeze2upnp::beat (189)
> crashed ... restarting
> [21-04-25
cron is part of the OS and when you shutdown the OS then you cannot
start it with cron.
jd68's Profile: http://forums.slimdevices.com/member.php?userid=30795
View this thread:
With the latest version of LMS 8.2 should we disable/uninstall the
'Reliable' plugin and use the 'Streaming mode for HTTP(S)' options in
'Advanced/Network/Streaming mode for HTTP(S)?
Seems to be working perfectly with 'Reliable' disabled and 'Streaming
mode for HTTP(S)' set to Cache HTTP(S)
gegen wrote:
> With the latest version of LMS 8.2 should we disable/uninstall the
> 'Reliable' plugin and use the 'Streaming mode for HTTP(S)' options in
> 'Advanced/Network/Streaming mode for HTTP(S)?
>
> Seems to be working perfectly with 'Reliable' disabled and 'Streaming
> mode for
philippe_44 wrote:
> Yes - the plugin is not needed anymore with the latest 8.2. Look at LMS
> Settings/NetworkOK I thought that must be it. I tried playing the Absolute
> 80s box sets
from the Bauer plugin and found that playback often fails at the first
attempt. I had to wait quite a while
slartibartfast wrote:
> OK I thought that must be it. I tried playing the Absolute 80s box sets
> from the Bauer plugin and found that playback often fails at the first
> attempt. I had to wait quite a while for the server to finally realise
> the playback had failed before it let me try again.
slartibartfast wrote:
> OK I thought that must be it. I tried playing the Absolute 80s box sets
> from the Bauer plugin and found that playback often fails at the first
> attempt. I had to wait quite a while for the server to finally realise
> the playback had failed before it let me try again.
gegen wrote:
> All of those Absolute 80s box sets play instantly for
> me.settings at 'Cache HTTP(S) streams on disk'.
RPI 4 using piCorePlayer v7.0.1
gegen's Profile:
philippe_44 wrote:
> Sorry, my bad I committed something incorrect. Wait a few minutes
Just spotted that dev2 was available and gave it a quick go. Sorry if
I've jumped the gun and you aren't ready for me to test again yet - I'm
about to go to bed so thought I'd give it a try anyway.
Started
philippe_44 wrote:
> Sorry, my bad I committed something incorrect. Wait a few minutes
One more test before I go to bed: dev2 is still skipping,
unfortunately.
I Think I Love You played through
Look At Me skipped after a millisecond
Beauty To My Eyes played back okay (I stopped playback
gegen wrote:
> All of those Absolute 80s box sets play instantly for
> me.settings at 'Cache HTTP(S) streams on disk'.Every time? They don't
> for me playing to a Touch synced with a pCP 7.01.
Sent from my Pixel 3a using Tapatalk
bpa wrote:
> I checked out the container structure of the 1-13_Last_Kiss.m4a file and
> it was OK.
>
> Which is the file that ffmpeg throws up an error ? I'll check it out.
> The issue might be something like metadata which can be Apple
> proprietary.
This one has en error
benh wrote:
> I understand what you are saying, and your example is helpful.
>
> I think perhaps I have been misunderstanding the nature of this
> particular encoding error. I had understood it to be an error in
> encoding some audio at an arbitrary and random timecode. What I now
>
Hi Philippe
You might recall a few months ago I was experiencing tracks skipping
when using the bridge with my Sonos. At the time you made a change and
everything had been working perfectly in the meantime.
Unfortunately I've started seeing a recurrence of the skipping today. I
had 2 skipped
FatPete wrote:
> Thanks. See attached.
>
> Track 1, Monsters And Angels played through okay
> Track 2, Adonis Blue, millisecond of playback then skips to...
> Track 3, I Think I Love You (playback seems okay - I manually stop
> playback to send logs)
Thanks, I'm looking at that right now
Any chance there was an update of Sonos firmware recently? It looks like
it was the case.
LMS 8.2 on Odroid-C4 - *SqueezeAMP!*, 5xRadio, 5xBoom, 2xDuet, 1xTouch,
1xSB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW,
2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi,
benh wrote:
> By amazing coincidence, that error above is from 1-13_Last_Kiss.m4a.
> The error plus the bit immediately after, when the session ends:
>
> [alac @ 0x56149523bc40] invalid samples per frame: 0/s speed=80.7x
> Error while decoding stream #0:0: Invalid data found when processing
>
FatPete wrote:
> Hi Philippe
>
> You might recall a few months ago I was experiencing tracks skipping
> when using the bridge with my Sonos. At the time you made a change and
> everything had been working perfectly in the meantime.
>
> Unfortunately I've started seeing a recurrence of the
philippe_44 wrote:
> Is issue 2 reproducible?
Unfortunately yes - I've got something really odd going on tonight.
Trying to play another album and it skips the next track after the
current one finishes almost every time now - I have to keep going back
and replaying. I've restarted my Docker
philippe_44 wrote:
> My observation on the Smokey Robinson file was an error toward the
> *very* end (confirmed by both ffmpeg and my built-in decoder)
Log from ffmpeg of Smokey Robinson track - shows the error in input
stream - not a duration issue or EOF error.
Code:
FatPete wrote:
> Unfortunately yes - I've got something really odd going on tonight.
> Trying to play another album and it skips the next track after the
> current one finishes almost every time now - I have to keep going back
> and replaying. I've restarted my Docker container but still
philippe_44 wrote:
> Can you set the following on "extra command line options" "-d all=info",
> clean the log and redo a log? I think I have an idea but I need some
> extra data
Thanks. See attached.
Track 1, Monsters And Angels played through okay
Track 2, Adonis Blue, millisecond of
nimnul wrote:
> Would it be possible for the creator of this Plugin to make a version of
> this plug in that makes OpenHome compatible devices pop up in LMS?
>
> That would be brands like Linn, Auralic, Lumin Cambridge Audio(?) and
> many more.
>
> I believe availible info can be found here:
philippe_44 wrote:
> Any chance there was an update of Sonos firmware recently? It looks like
> it was the case.
Good question, and from what I can tell I don't think so. Reason being
that my Move is still on 13.0.0 which I'd updated to when it was first
released around 5 weeks ago. The iOS
Hi,
is there any way to send a mono stream to a upnp player. I see that
SBoxes have an option under audio settings, but no option for upnp
players.
34402
34403
Thanks!!
Antonio
+---+
|Filename: 2021-04-25_22-27-25.png
63 matches
Mail list logo