Re: [SlimDevices: Plugins] Aqua USB dac not being RECOGNIZED by PiCorePlayer.(diagnostics shown here)
edward.zeidan wrote: > After all of that, I swapped it for a Cheap spare USB cable and it > worked straight away. > think that "Audio Grade" handmade cable the Shielding End to End was not > connected. > We measured it with a Multi-meter. This must be important to the > Rasberry Pi. There is a > shielding wire, but it must be only held in place with Heat Shrink. But > it now works > and the DAC is working just great. OK, that's great! -- Update your post over at AA, so if someone sees it they could try another cable as well. Cut-Throat's Profile: http://forums.slimdevices.com/member.php?userid=43167 View this thread: http://forums.slimdevices.com/showthread.php?t=116091 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Aqua USB dac not being RECOGNIZED by PiCorePlayer.(diagnostics shown here)
chrissy wrote: > Hi, > > usb 1-1-port2: Cannot enable. Maybe the USB cable is bad? > > Tried a new version of piCoreplayer? Changed the usb cable? > > Greets > Christian After all of that, I swapped it for a Cheap spare USB cable and it worked straight away. think that "Audio Grade" handmade cable the Shielding End to End was not connected. We measured it with a Multi-meter. This must be important to the Rasberry Pi. There is a shielding wire, but it must be only held in place with Heat Shrink. But it now works and the DAC is working just great. edward.zeidan's Profile: http://forums.slimdevices.com/member.php?userid=68680 View this thread: http://forums.slimdevices.com/showthread.php?t=116091 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Aqua USB dac not being RECOGNIZED by PiCorePlayer.(diagnostics shown here)
I had the same thing with my Musician Pegasus... impossible to lock the USB port on my new RPI4 (bach from December). The solution ? insert a USB hub. It works with a basic hub but I had an Ohlenbach reclocker which works very well ($80 better than a simple hub). No other software solution (dac firmware or other distribution). zaurux's Profile: http://forums.slimdevices.com/member.php?userid=69135 View this thread: http://forums.slimdevices.com/showthread.php?t=116091 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Aqua USB dac not being RECOGNIZED by PiCorePlayer.(diagnostics shown here)
Hi, usb 1-1-port2: Cannot enable. Maybe the USB cable is bad? Tried anew version of piCorpalyer? Changed the usb cable? Greets Christian Raspi 4 as server for various things besides lms Raspi 3 feeding a SPL Phonitor xe for headphones Minidsp shd running squeezelite feeding a poweramp and a pair of Nubert nuvero 70 and 2 elac Sub 2070 2 Squeezebox Radios (kitchen and bath) Nubert NuPro A200, AW350 Sub , raspi 3 with hifiberry digi+ for the bedroom raspi A with M2Tech HiFace usb dac and JBL Control 1 for the balcony :-) chrissy's Profile: http://forums.slimdevices.com/member.php?userid=47801 View this thread: http://forums.slimdevices.com/showthread.php?t=116091 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
[SlimDevices: Plugins] Aqua USB dac not being RECOGNIZED by PiCorePlayer.(diagnostics shown here)
Hi Everybody, PicorePlayer Ver7 will not recognize the USB Dac I have connected to it. I've tried all these output settings in Squeezelite, but none of them make music, even though the file will be playing in S.Lite. can you suggest something?THANKS. I HAVE USED AND TRIED THE FOLLOWING SCRIPTS: hw:CARD=a384,DEV=0 front:CARD=a384,DEV=0 hw:CARD=b1,DEV=0Plugw:CARD=b1,DEV=0 sysdefault:CARD=bi sysdefault:CARD=a384 sysdefault:CARD=a384,DEV=0 ieca384:CARD=Device,DEV=0 plughw:CARD=a384,DEV=0 DIAGNOSTICS PAGE EXTRACT 49.482172] usb 1-1.2: Product: aqua USB Audio 384 [ 49.482179] usb 1-1.2: Manufacturer: aqua [ 49.489046] usb 1-1.2: 1:3 : unsupported format bits 0x1 [ 49.495636] usbhid 1-1.2:1.3: can't add hid device: -71 [ 49.495658] usbhid: probe of 1-1.2:1.3 failed with error -71 [ 49.496210] usb 1-1.2: USB disconnect, device number 51 [ 49.841620] usb 1-1.2: new high-speed USB device number 52 using xhci_hcd [ 49.972074] usb 1-1.2: New USB device found, idVendor=31c1, idProduct=0002, bcdDevice= 6.f2 [ 49.972082] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 49.972089] usb 1-1.2: Product: aqua USB Audio 384 [ 49.972095] usb 1-1.2: Manufacturer: aqua [ 49.978935] usb 1-1.2: 1:3 : unsupported format bits 0x1 [ 49.985478] usbhid 1-1.2:1.3: can't add hid device: -71 [ 49.985501] usbhid: probe of 1-1.2:1.3 failed with error -71 [ 50.180262] usb 1-1.2: USB disconnect, device number 52 [ 50.481619] usb 1-1.2: new high-speed USB device number 53 using xhci_hcd [ 50.582022] usb 1-1.2: Device not responding to setup address. [ 50.801781] usb 1-1.2: Device not responding to setup address. [ 51.021622] usb 1-1.2: device not accepting address 53, error -71 [ 51.561620] usb 1-1.2: new high-speed USB device number 54 using xhci_hcd [ 51.662005] usb 1-1.2: Device not responding to setup address. [ 51.881773] usb 1-1.2: Device not responding to setup address. [ 52.101618] usb 1-1.2: device not accepting address 54, error -71 [ 52.101871] usb 1-1-port2: attempt power cycle [ 52.981618] usb 1-1.2: new high-speed USB device number 55 using xhci_hcd [ 52.981787] usb 1-1.2: Device not responding to setup address. [ 53.201775] usb 1-1.2: Device not responding to setup address. [ 53.421621] usb 1-1.2: device not accepting address 55, error -71 [ 54.331910] usb 1-1-port2: Cannot enable. Maybe the USB cable is bad? [ 54.332146] usb 1-1-port2: unable to enumerate USB device edward.zeidan's Profile: http://forums.slimdevices.com/member.php?userid=68680 View this thread: http://forums.slimdevices.com/showthread.php?t=116091 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins