Re: [SlimDevices: Plugins] WaveInput plugin and Cirrus Logic (Wolfson) audio card
Thanks all, for your replies. I will potter around with this over the weekend. Ronnie - yes I can investigate other operating systems, but my preference would be to use pCP for consistency. I am reasonably familiar with Linux, so should be OK. Paul - yes, I'm aware of the need for a phono stage, and was thinking of taking the audio output from the amp rather than directly from the turntable. My current phono stage gas a USB out put for recording, e.g. with Audacity, so another option might be to take output from there. Perhaps a Pi Zero WH with direct USB input from the phono stage might work better. I've also got a Behringer UFO-202 which might be helpful. bpa - Thanks also for that hint. A weekend of tinkering awaits! (Assuming I'm not called on to pick up some marking duties). Best wishes, Robert *Home: *Raspberry Pi 4/pCP7.0/LMS8.0.1/Material with files on QNAP TS-251A Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 > Rega Fono Mini; Naim CD3) 2 x Squeezebox Radios, 1 X Squeezebox 3 (retired), spare Pi2/piCorePlayer *Office:* LMS8.0.0 running on Raspberry Pi3; Raspberry Pi 3 player with touchscreen/piCorePlayer/IQaudIO DAC and Amp *Portable:* Raspberry Pi 3B/pCP6.1.0/LMS8.0.0/Material, files on Seagate portable drive, powered via power brick Grumpy Bob's Profile: http://forums.slimdevices.com/member.php?userid=41857 View this thread: http://forums.slimdevices.com/showthread.php?t=113920 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] WaveInput plugin and Cirrus Logic (Wolfson) audio card
It would be better to use arecord -l as that would only show the valid capture devices - "aplay -L" shows ALL alsa device playback and capture. WaveInput is a LMS plugin and so audio input will only work on the Pi which has both the Line-in hardware and LMS. If want to use a Line-in on a PCP player (i.e. no LMS) - IIRC there is a PCP facility to take Line input and stream it as a Http MP3 stream and so "Line-in" can be played as a Favorite. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=113920 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] WaveInput plugin and Cirrus Logic (Wolfson) audio card
ciao Roberto !:) I have switched to Raspberry PI OS Lite on my rpi1b. https://www.horus.com/~hias/cirrus-driver.html That might be a better bet, included the links for your consideration https://www.element14.com/community/thread/57975/l/new-reworked-driver-for-wolfsoncirrus-logic-audio-card ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=113920 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] WaveInput plugin and Cirrus Logic (Wolfson) audio card
You could run aplay -L to see if any input devices have been recognised by the system. If they have then you have a good chance of it working. You might need a pre-amp between the turntable and the Pi. Paul Webster http://dabdig.blogspot.com author of \"now playing\" plugins covering radio france (fip etc), kcrw, supla finland, abc australia, cbc/radio-canada and rte ireland Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=113920 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
[SlimDevices: Plugins] WaveInput plugin and Cirrus Logic (Wolfson) audio card
One of my pCP players is a model 2 Raspberry Pi (no built-in wifi or bluetooth). It has a Cirrus Logic (Wolfson) audio card fitted, which works very well and I'm using this Pi to drive Bluetooth headphones via a USB bluetooth stick. The other USB socket has the USB WiFi stick. The Cirrus Logic has a line level audio input as well as a variety of outputs, though I don't know how to access that input. Incidentally, I am running pCP 6.1.0 on this Pi, because 7.0.0 doesn't seem to support the Cirrus Logic card. I've seen thread discussing how to use the WaveInput plugin to play turntable music through LMS. I was wondering whether I would be able to configure the Cirrus Logic card's audio input in a similar way, thereby enabling the use of this Pi to hook up my bluetooth headphones to my HiFi when playing vinyl my other half doesn't like! Any clues? or would it be easier to buy a cheap BT device? Robert *Home: *Raspberry Pi 4/pCP7.0/LMS8.0.1/Material with files on QNAP TS-251A Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752 (plus Rega Planar 3 > Rega Fono Mini; Naim CD3) 2 x Squeezebox Radios, 1 X Squeezebox 3 (retired), spare Pi2/piCorePlayer *Office:* LMS8.0.0 running on Raspberry Pi3; Raspberry Pi 3 player with touchscreen/piCorePlayer/IQaudIO DAC and Amp *Portable:* Raspberry Pi 3B/pCP6.1.0/LMS8.0.0/Material, files on Seagate portable drive, powered via power brick Grumpy Bob's Profile: http://forums.slimdevices.com/member.php?userid=41857 View this thread: http://forums.slimdevices.com/showthread.php?t=113920 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins