Hi Paolo, On Tue, Feb 25, 2020 at 6:41 PM Paolo Lucente <pa...@pmacct.net> wrote:
> > Hi Alex, > > Thanks for your feedback. I see you did run "tcpdump -n -vv -i nflog:1" > which is equivalent to run uacctd without any filters; as you may know, > you can append a BPF-style filter to the tcpdump command-line, precisely > as you express it in pre_tag_map. Can you give that a try and see if you > get any luck? > Bad luck... I get: tcpdump -nvv -i nflog:1 src net 192.168.28.0/24 tcpdump: NFLOG link-layer type filtering not implemented It seems that filtering at nflog interface is not supported. Running tcpdump -nvv -i eth0 src net 192.168.28.0/24 does capture traffic normally. Is there any other way I could apply some filtering with uacctd? I need to use uacctd since I get all the pre-nat, post-nat details of the flows, so as to account traffic at the WAN interfaces with the real source details. > My expextation is: if something does not work with pre_tag_map, it > should also not work with tcpdump; if you work out a filter to work > against tcpdump, that should work in pre_tag_map as well. Any disconnect > among the two may bring the scent of a bug. > > Paolo > > On Tue, Feb 25, 2020 at 11:20:21AM +0200, Alex K wrote: > > Here is the output when running in debug mode: > > > > INFO ( default/core ): Linux NetFilter NFLOG Accounting Daemon, uacctd > > (20200222-01) > > INFO ( default/core ): '--prefix=/usr' '--enable-mysql' '--enable-nflog' > > '--enable-l2' '--enable-traffic-bins' '--enable-bgp-bins' > > '--enable-bmp-bins' '--enable-st-bins' > > INFO ( default/core ): Reading configuration file > > '/root/pmacct/uacctd2.conf'. > > INFO ( print_wan0_in/print ): plugin_pipe_size=4096000 bytes > > plugin_buffer_size=280 bytes > > INFO ( print_wan0_in/print ): ctrl channel: obtained=212992 bytes > > target=117024 bytes > > INFO ( print_wan0_out/print ): plugin_pipe_size=4096000 bytes > > plugin_buffer_size=280 bytes > > INFO ( print_wan0_out/print ): ctrl channel: obtained=212992 bytes > > target=117024 bytes > > INFO ( print_wan0_in/print ): cache entries=16411 base cache > > memory=54878384 bytes > > INFO ( default/core ): [pretag2.map] (re)loading map. > > INFO ( print_wan0_out/print ): cache entries=16411 base cache > > memory=54878384 bytes > > INFO ( default/core ): [pretag2.map] map successfully (re)loaded. > > INFO ( default/core ): [pretag2.map] (re)loading map. > > INFO ( default/core ): [pretag2.map] map successfully (re)loaded. > > INFO ( default/core ): [pretag2.map] (re)loading map. > > INFO ( default/core ): [pretag2.map] map successfully (re)loaded. > > INFO ( default/core ): Successfully connected Netlink NFLOG socket > > > > It doesn't seem to have any issues loading the maps, though it is not > > collecting anything. When capturing with tcpdump I see packets going > > through: > > > > tcpdump -n -vv -i nflog:1 > > 09:16:05.831131 IP (tos 0x0, ttl 64, id 36511, offset 0, flags [DF], > proto > > ICMP (1), length 84) > > 192.168.28.11 > 8.8.8.8: ICMP echo request, id 17353, seq 1, length > 64 > > 09:16:05.831362 IP (tos 0x0, ttl 49, id 0, offset 0, flags [none], proto > > ICMP (1), length 84) > > 8.8.8.8 > 192.168.28.11: ICMP echo reply, id 17353, seq 1, length 64 > > 09:16:05.831392 IP (tos 0x0, ttl 64, id 36682, offset 0, flags [DF], > proto > > ICMP (1), length 84) > > 192.168.28.11 > 8.8.8.8: ICMP echo request, id 17353, seq 2, length > 64 > > 09:16:06.855200 IP (tos 0x0, ttl 49, id 0, offset 0, flags [none], proto > > ICMP (1), length 84) > > 8.8.8.8 > 192.168.28.11: ICMP echo reply, id 17353, seq 2, length 64 > > > > The pmacct version I am running is latest master. > > Thank you for your assistance. > > > > Alex > > > > > > On Mon, Feb 24, 2020 at 6:20 PM Alex K <rightkickt...@gmail.com> wrote: > > > > > Hi Paolo, > > > > > > On Sat, Feb 22, 2020 at 4:18 PM Paolo Lucente <pa...@pmacct.net> > wrote: > > > > > >> > > >> Hi Alex, > > >> > > >> Is it possible with the new setup - the one where pre_tag_map does not > > >> match anything - the traffic is VLAN-tagged (or MPLS-labelled)? If so, > > >> you should adjust filters accordingly and add 'vlan and', ie. "vlan > and > > >> src net 192.168.28.0/24 or vlan and src net 192.168.100.0/24". > > >> > > > The traffic is not VLAN or MPLS. It is simple one. I confirm I can > collect > > > traffic when removing the pretag directives. Also when stopping > uacctd, I > > > can capture traffic at nflog:1 interface. > > > I simplified the configuration as below: > > > > > > ! > > > daemonize: true > > > promisc: false > > > uacctd_group: 1 > > > ! > > > pre_tag_map: pretag2.map > > > pre_tag_filter[print_wan0_in]: 1 > > > pre_tag_filter[print_wan0_out]: 2 > > > ! > > > !------------------------------------------------- > > > plugins: print[print_wan0_in], print[print_wan0_out] > > > print_refresh_time: 10 > > > print_history: 15m > > > print_output_file_append: true > > > ! > > > print_output[print_wan0_in]: csv > > > print_output[print_wan0_out]: csv > > > print_output_file[print_wan0_in]: traffic-wan0-in.csv > > > print_output_file[print_wan0_out]: traffic-wan0-out.csv > > > ! > > > aggregate[print_wan0_in]: tag, src_host, dst_host, src_port, dst_port, > > > proto > > > aggregate[print_wan0_out]: tag, src_host, dst_host, src_port, dst_port, > > > proto > > > ! > > > > > > with pretag2.map > > > set_tag=1 filter='src net 192.168.28.0/24' > > > set_tag=2 filter='dst net 192.168.28.0/24' > > > > > > As soon as I enable the pretag directives as below, I do not see any > > > traffic being collected from uacctd at NFLOG goup 1 > > > > > > pre_tag_map: pretag2.map > > > pre_tag_filter[print_wan0_in]: 1 > > > pre_tag_filter[print_wan0_out]: 2 > > > > > > I am running pmacct 1.7.4. > > > > > > > > >> Paolo > > >> > > >> On Fri, Feb 21, 2020 at 01:04:25PM +0200, Alex K wrote: > > >> > Working further on this, it seems that for pmacct is sufficient to > > >> filter > > >> > traffic using only the pre_tag_filter, thus no need for the > aggregation > > >> > filters. > > >> > The issue with this setup though is that I loose the information of > the > > >> > pre_nat source IP address when monitoring at the WAN interfaces. > Due to > > >> > this I am switching to uacctd as following: > > >> > > > >> > ! > > >> > daemonize: true > > >> > promisc: false > > >> > uacctd_group: 1 > > >> > !networks_file: networks.lst > > >> > !ports_file: ports.lst > > >> > ! > > >> > pre_tag_map: pretag2.map > > >> > pre_tag_filter[print_wan0_in]: 1 > > >> > pre_tag_filter[print_wan0_out]: 2 > > >> > pre_tag_filter[wan0_in]: 1 > > >> > pre_tag_filter[wan0_out]: 2 > > >> > ! > > >> > plugins: print[print_wan0_in], print[print_wan0_out], > mysql[wan0_in], > > >> > mysql[wan0_out] > > >> > plugin_pipe_size[wan0_in]: 1024000 > > >> > plugin_pipe_size[wan0_out]: 1024000 > > >> > print_refresh_time: 10 > > >> > print_history: 15m > > >> > print_output_file_append: true > > >> > ! > > >> > print_output[print_wan0_in]: csv > > >> > print_output_file[print_wan0_in]: in_traffic.csv > > >> > print_output[print_wan0_out]: csv > > >> > print_output_file[print_wan0_out]: out_traffic.csv > > >> > ! > > >> > aggregate[print_wan0_in]: dst_host, src_port, dst_port, proto > > >> > aggregate[print_wan0_out]: src_host, src_port, dst_port, proto > > >> > ! > > >> > sql_table[wan0_in]: traffic_wan0_in_%Y%m%d_%H%M > > >> > sql_table[wan0_out]: traffic_wan0_out_%Y%m%d_%H%M > > >> > ! > > >> > sql_table_schema[wan0_in]: traffic_wan0_in.schema > > >> > sql_table_schema[wan0_out]: traffic_wan0_out.schema > > >> > ! > > >> > sql_host: localhost > > >> > sql_db : uacct > > >> > sql_user : uacct > > >> > sql_passwd: uacct > > >> > sql_refresh_time: 30 > > >> > sql_optimize_clauses: true > > >> > sql_history : 24h > > >> > sql_history_roundoff: mhd > > >> > ! > > >> > aggregate[wan0_in]: dst_host, src_port, dst_port, proto > > >> > aggregate[wan0_out]: src_host, src_port, dst_port, proto > > >> > > > >> > Where pretag2.map: > > >> > set_tag=1 filter='src net 192.168.28.0/24 or src net > 192.168.100.0/24' > > >> > set_tag=2 filter='dst net 192.168.28.0/24 or dst net > 192.168.100.0/24' > > >> > > > >> > The issue I have with the above config is that no traffic is being > > >> > collected at all. I confirm that when removing the pre_tag filters, > > >> traffic > > >> > is collected, though it is not sorted per direction as I would like > to > > >> > have. > > >> > Can I use pre_tag_map and pre_tag_filter with uacctd? I don't see > any > > >> > examples for uacctd at > > >> > > > >> > https://github.com/pmacct/pmacct/blob/master/examples/pretag.map.example. > > >> > > > >> > Thanx, > > >> > Alex > > >> > > > >> > On Thu, Feb 20, 2020 at 6:33 PM Alex K <rightkickt...@gmail.com> > wrote: > > >> > > > >> > > Hi all, > > >> > > > > >> > > I have a router with multiple interfaces and will need to account > > >> traffic > > >> > > at its several WAN interfaces. My purpose is toaccount the traffic > > >> with the > > >> > > tuple details and the direction. > > >> > > > > >> > > As a test I have compiled the following simple configuration for > > >> pmacctd: > > >> > > > > >> > > ! > > >> > > daemonize: true > > >> > > plugins: print[wan0_in], print[wan0_out] > > >> > > print_refresh_time: 10 > > >> > > print_history: 15m > > >> > > ! > > >> > > print_output[wan0_in]: csv > > >> > > print_output_file[wan0_in]: in_traffic.csv > > >> > > print_output[wan0_out]: csv > > >> > > print_output_file[wan0_out]: out_traffic.csv > > >> > > ! > > >> > > aggregate[wan0_in]: src_host, dst_host, src_port, dst_port, tag > > >> > > aggregate[wan0_out]: src_host, dst_host, src_port, dst_port, tag > > >> > > ! > > >> > > pre_tag_filter[wan0_in]:1 > > >> > > pre_tag_filter[wan0_out]:2 > > >> > > ! > > >> > > pcap_interface: eth0 > > >> > > pre_tag_map: pretag.map > > >> > > networks_file: networks.lst > > >> > > ports_file: ports.lst > > >> > > ! > > >> > > > > >> > > where pretag.map is: > > >> > > set_tag=1 filter='ether dst 52:54:00:69:a6:0b' > > >> > > set_tag=2 filter='ether src 52:54:00:69:a6:0b' > > >> > > > > >> > > and networks.lst is: > > >> > > 10.100.100.0/24 > > >> > > > > >> > > It seems that the details output at the CSV are correctly filtered > > >> > > according to the tag, thus recording the direction also, based on > the > > >> MAC > > >> > > address of the WAN0 interface. > > >> > > > > >> > > Is this the correct approach to achieve this or is there any other > > >> > > recommended way? Do I need to use aggregate_filters? > > >> > > > > >> > > Also, although I have set a network filter to capture only > > >> 10.100.100.0/24, > > >> > > I observe several networks in/out being collected, indicating > that the > > >> > > network_file directive is ignored or I have misunderstood its > > >> purpose. My > > >> > > purpose it to collect traffic only generated from subnets that > belong > > >> to > > >> > > configured interfaces of the router. > > >> > > > > >> > > Thanx for your feedback! > > >> > > Alex > > >> > > > > >> > > > > >> > > > > >> > > >> > _______________________________________________ > > >> > pmacct-discussion mailing list > > >> > http://www.pmacct.net/#mailinglists > > >> > > >> > > >> _______________________________________________ > > >> pmacct-discussion mailing list > > >> http://www.pmacct.net/#mailinglists > > >> > > > >
_______________________________________________ pmacct-discussion mailing list http://www.pmacct.net/#mailinglists