Sounds like you have already have the DB server hardware.
It may be a good idea to simulate the data flows to and from your DB. Some
scripts that insert data at different constant rates and/or intermittent as it
comes from nfacctd normally generate the input to the DB. At the same time you
prepa
Hi Mattias,
do you have a drawing of your setup? I have to admit that it is unclear to me…
Thanks,
Mario
From: pmacct-discussion [mailto:pmacct-discussion-boun...@pmacct.net] On Behalf
Of Mattias Larsson
Sent: Thursday, August 18, 2016 1:36 PM
To: pmacct-discussion@pmacct.net
Subject: [pmacct-d
Hi Matthias,
could it be that your hosts does NOT accept/process the packets as those
are targeted to another MAC address? If you run wireshark/tcpdump the
interface to put into promiscuous mode to get them ...
If all have the same dst mac just change your interface facing the SPAN
port to i
Hi Markus,
Not sure what you mean with that the server does NOT accept/process the
packets due to it target to another MAC address.
I thought the pmacctd used the libpcap the same way that tcpdump does and
analyses packets. But with tcpdump I have to use -vvv the all of the packet.
This is what
Hi Mattias,
From what i read so far I believe the pesky bit here is that you are using
pmacctd (which is the libpcap-based daemon) rather than nfacctd (which is
the NetFlow collector daemon, which collects and analyses/dissects NetFlow
packets).
Cheers,
Paolo
On Fri, Aug 19, 2016 at 12:37:39P