Ben:
I had 9.1 running on the machine with the Airport drivers installed via
TomeViewer before I went to 9.2.2. It was fine at that point and didn't
hang when shutting down. I think (but I'm not sure because I don't have
the machine booted up right now) that I have Time Server set to
It is odd. I did a clean install of 8.5 which didn't have any trouble
rebooting, and I fired up Civilization 1 just to test. Seemed to
work, but starting Civilization 1 by double-clicking a save game
brought on a hard lock, which it also did under 8.6. Go figure.
(Fwiw, I also somehow have
I just bought a 56k PCMCIA card modem for my PB 1400. The card in question is Viking
Components PC Card Modem, 56k.
First of all, the software disk that came with it seems to be damaged. I was unable
to retrieve data off it, depsite the fact that everything came sealed brand new in
box. I
I have a 5300, which was redone at Apple, but since it's been back it keeps
freezing up or saying that finder has quit...could this be the 16 meg on
board ram?? Where on earth is the board ram located, please??
Thanks for any help...Peg
--
PowerBooks is sponsored by http://lowendmac.com/
Does anyone on the list run anything like this (ie any
usb 1.1 external hard drive/mp3 player not an iPod?)
I'm running a 3400 under 8.6, using a macally cardbus
pcmcia usb. First time I plugged it in, it saw this
just fine, mounted on the desktop, I copied files to
it, no problem.
Second time
Hello,
I would like to check the procedure to reset the PRAM settings and
the Power Manager on the 3400.
a. do I take out the battery before re-setting the PRAM? are these
instructions right?
To Re-set PRAM
1. Shut down powerbook, making sure Caps Lock is not on. Unplug AC adapter.
3. Press on
Hello listers,
I recently acquired a Newertech ethernet card that plugs into the expansion
port (near the RAM slots) inside the Powerbook 1400s.
Only thing is, I cannot seem to get it to work; does it require any software?
Thanks,
Craig W.
--
PowerBooks is sponsored by http://lowendmac.com/
Would suggest so. I acquired a PowerBook 1400cs and an Ossietech Jack
of Diamonds Trumpcard 28.8 card modem thanks to the kindness of a
lister.
Came with a floppy with software on it, and the website also had a
downloadable version which was identical.
You need the software as you have to
In a message dated 1/12/04 4:03:05 AM, [EMAIL PROTECTED] writes:
You need the software as you have to get the modem card icon on the
desktop and set it up to recognise the upper slot.
Suggest www.newertech.com/. They do have a driver section on their
home page.
Well actually, this ethernet
On Jan 11, 2004, at 11:19 PM, [EMAIL PROTECTED] wrote:
In a message dated 1/12/04 4:03:05 AM, [EMAIL PROTECTED] writes:
You need the software as you have to get the modem card icon on the
desktop and set it up to recognise the upper slot.
Suggest www.newertech.com/. They do have a driver
Like Peter said, you need to get the Ethertech Installer software at OWC
JK
[EMAIL PROTECTED] 01/11/04 20:54 PM
On Jan 11, 2004, at 11:19 PM, [EMAIL PROTECTED] wrote:
In a message dated 1/12/04 4:03:05 AM, [EMAIL PROTECTED] writes:
You need the software as you have to get the modem card
Okay, I have learned a lot today... for the posterity
of the list, here goes:
Does it work? YES! Well, I knew it did, because I got
the device to load on my pb 3400 this morning, using a
macally usb card under usb 1.1, and I copied files to
it. Those files stared at me all day as I tried all
12 matches
Mail list logo
