' ; Jim
VanLooven
Subject: [Powernet] RP field instrument tamper seals
*** Exercise caution. This is an EXTERNAL email. DO NOT open attachments or
click links from unknown senders or unexpected email. ***
I have a question regarding tamper resistant seals for calibration on RP
meters. A QA
rles E ; 'Mark Tursa' ;
Jim VanLooven
Subject: Re: [Powernet] RP field instrument tamper seals
CAUTION: This email originated from outside OPPD.
Do not click any links or open attachments unless you recognize this sender -
powernet-boun...@hpspowernet.org.
Use the "Report it" but
powernet@hpspowernet.org<mailto:powernet@hpspowernet.org>
Cc: Tom Meek mailto:orio...@cni.net>>; 'Mark Tursa'
mailto:mark.tu...@pgn.com>>; Jim VanLooven
mailto:james.vanloo...@pgn.com>>
Subject: [Powernet] RP field instrument tamper seals
TVA External Message.
ge.
From: Powernet On Behalf Of Tom Meek via
Powernet
Sent: Tuesday, April 9, 2019 2:25 PM
To: powernet@hpspowernet.org
Cc: Tom Meek ; 'Mark Tursa' ; Jim
VanLooven
Subject: [Powernet] RP field instrument tamper seals
TVA External Message. Please use caution when opening.
I have a question regard
Ontario Power generation does not
Ephraim Schwartz
> On Apr 9, 2019, at 3:24 PM, Tom Meek via Powernet
> wrote:
>
> I have a question regarding tamper resistant seals for calibration on RP
> meters. A QA audit made a SFR (supplier finding report) at an instrument
> calibration facility
...@hpspowernet.org] On Behalf Of Tom Meek
via Powernet
Sent: Tuesday, April 09, 2019 3:26 PM
To: powernet@hpspowernet.org
Cc: Tom Meek; 'Mark Tursa'; Jim VanLooven
Subject: [External] [Powernet] RP field instrument tamper seals
I have a question regarding tamper resistant seals for calibration on RP
ursa' ; Jim
VanLooven
Subject: [Powernet] RP field instrument tamper seals
EXTERNAL MAIL: Caution Opening Links or Files
I have a question regarding tamper resistant seals for calibration on RP
meters. A QA audit made a SFR (supplier finding report) at an instru
I was a member of the HPS Lab Accreditation Committee for a few years
before the HPS abandoned that worthwhile project. ISO17025 was a big part
of our assessment steps. Tamper seals were not stated as a requirement
but "practical steps to prevent tampering" are a valid point.
Los Alamos does
@hpspowernet.org
Cc: Tom Meek ; 'Mark Tursa' ; Jim
VanLooven
Subject: [Powernet] RP field instrument tamper seals
EXTERNAL: Think Before You Click!
Email sent from: Tom Meek via Powernet
powernet-boun...@hpspowernet.org<mailto:powernet-boun...@hpspowernet.org>
I have a question regarding
I have a question regarding tamper resistant seals for calibration on RP
meters. A QA audit made a SFR (supplier finding report) at an instrument
calibration facility stating vendor should be placing these seals on our RP
meters.
The cited standard is ANSI Z540:1994 Section 11.5, but after
10 matches
Mail list logo
