See below
Michael Schmitt schrieb:
What do we want ? we want the copper of the vias being covered with the
solder mask but the via holes open.
I add a solder mask expansion design rule that simply says the rules
attribut is -Minimum_Annular_Ring (what i use for the vias 10mil). This
Hello all,
I am using Mechanical Layers 5 +6 first time and run into an famous effect: my
tracks an these layers disappear! Every time I set an other layer aktiv (i.e
TopLayer) and caus an redraw (i.e. by panning or hit [V]+[R] keys) I cant see my
lines any more. When I set the Llayer
Waldemar,
you are seeing the exact same effect that I do when I use mechanical
layers 5 - 16. The above mentioned mechanical layers only seem to display
reliably or properly when they are the current layer.
It seems to be a bug or coding deficiency with the program that
effects
Forum members,
Can anyone give me a current status on what forum message archives are out
there? I queried the forum admin a couple of weeks ago (below) but have not
yet heard anything. Info/advice is welcome and appreciated.
KP
===
Ken,
there are two archives that I know of.
1) Techserve does have some form of archive and daily digests. Follow the
link at the very bottom of each listserver message. You can also use the
Techserve help link to obtain instructions on how to request archives or
digests of the PEDA
Waldemar Kulajew wrote:
Hello all,
I am using Mechanical Layers 5 +6 first time and run into
an famous effect: my
tracks an these layers disappear! Every time I set an other layer
aktiv (i.e TopLayer) and caus an redraw (i.e. by panning or hit [V]+[R]
keys) I cant see my
lines any
Joop,
as I have stated, I experience the same problem as Waldemar. In my
case this issue has been consistent across two machines I've had and several
other company machines. The machines are usually similar but have had
several different video cards/drivers.
In both of my machines
Brad Velander wrote:
Heiko,
very interesting. Now I am very interested. What sort of Protel
display setup parameters are you using? I assume you are not using single
layer.
Right.
My mechanical layers 5 - 16 display just as though just they are set
to single layer display mode. When
At 08:15 AM 9/13/01 -0700, Brad Velander wrote:
2) Yes, there is an independent Protel Users Association archive on Yahoo
groups. I do not know how complete it is or any other specific details about
it. You will have to setup an account for yourself and find the Protel
groups. A search for the
I also don't have the problem. I just used Tools and Mechanical Layers to
add layers 5-8 then turned them on and tried them out. They all stayed when
I changed to a trace layer and even when the screen was redrawn. I tried it
on an existing card and a new card and it worked in both places. I
(Advanced Route 3.1). I seem to remember the manual saying the
autorouter
Advanced Route 3.1 was an entirely different beast than the current router.
Compared to the current router Advanced Route was a useless piece of junk.
I think the current router is an evolution of the Neurorouter in
I also have this problem - on multiple machines (IBM and HP) with
different video cards and drivers.
I run Win2k with an S3 video card (32M) on the IBM; Win2k with an Elsa
Gloria II video card (64M) on the HP
John Haddy
-Original Message-
From: Brad Velander [mailto:[EMAIL
Thanks guys,
for confirming it is not a singular isolated problem (based on
response only). It is an annoying little problem which limits the
effectiveness of using Mech layers 5 - 16. I had thought it was a code
problem because it was consistent across a number of machines, video cards
On 03:03 PM 13/09/2001 -0600, Jim Muehlberg said:
I have protel installed on two separate network machines. I'd like to
have all my customization available on each machine.
What are the files I need to copy/share? I knew this at one time, but
lost the notes.
All the .RCS files and possibly
On 03:37 PM 13/09/2001 -0700, Brad Velander said:
Thanks guys,
for confirming it is not a singular isolated problem (based on
response only). It is an annoying little problem which limits the
effectiveness of using Mech layers 5 - 16. I had thought it was a code
problem because it was
I am trying to control curent paths in a mixed signal design. I have
separate gounds, an over-all ground plane with isolated islands which
should only connect under an ADC. I created a separate island with its own
net assignment and on the pcb implemented it by using a 0.1mil border all
the way
16 matches
Mail list logo