areas like card edge connectors. It is typically
limited to selective plating in the required areas. For regular solderable areas a
gold flash of as little as 2 - 3 uinches usually suffices very well.
Sincerely,
Brad Velander
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel
OrCAD or other packages, the Help file agrees with me though?
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
? Is there another option that is not quite so time consuming?
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: JaMi Smith [mailto
that we are starting to get
down to the details if you can answer all of the questions I posed, either just to
your own satisfaction or shared with the rest of us.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax
.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
Sent: Wednesday, March 12, 2003
as the
overlapping area between multiple layers. So it will not necessarily print the real
size of any pad portion on a single layer.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL
that is undefined at this time.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL
Dennis,
I could also contribute that in the imperial world our local suppliers seem to
have 0.094 as their standard routing tool. That is a very close equivalent to 2.4mm.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089
Yes Dennis, we are talking of the same issue.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Dennis Saputelli
not be using hotmail for their email address.
Checking out the website, they sell PC equipment. Maybe it is just a rouse to
up their visitor count on their site.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax
if it is
probably just some autoreply from their email server for a closed email account.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original
)? Sorry I don't recall exactly how I recovered but
maybe just playing with the Windows printer config will get things reset and working.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL
Ian,
I did see this one time myself, I had unknowingly disabled all the spacing rules.
Could this be your problem as well? I believe that you may also have to have online
DRC enabled.
Sincerely,
Brad Velander
-Original Message-
From: Ian Capps [mailto:[EMAIL
,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: George R. Forse [mailto:[EMAIL PROTECTED]
Sent: Thursday, April 03, 2003 6:15 AM
begin to fathom as I am not a
programmer. I only know that corrupted BPL and DPL files can be the source of problems
with P99SE from firsthand experience.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
you check the macros.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: John A. Ross [Design] [mailto:[EMAIL PROTECTED
it would go, just one line and it was in error
because it should have had a quantity of 2. It also doesn't seem to handle rows where
the first column is blank. And I have now seen the runtime error 13 a number of times
as well.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc
and it supplies the best technical support that I have found
anywhere for any CAD package, no one can compare to the gang providing free advice and
technical support on this newsgroup 24-7.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct
and reports them as unrouted nets which is an annoyance at
times. I wish it had the capability to determine if the unplated pad actually resulted
in a real unconnected net not just reporting every unplated pad as a possible unrouted
net.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat
later today. I will also see if I can
repeat the run-time error 13 and send it and some details of how it occurred to you,
if I can repeat it.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email
-SP4 and Sp4 suffixes on a bunch of M$ Hot Fix entries.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Brian Guralnick
from scratch
in that effected area.
I would have to ask, does Spectra have this capability? If Spectra doesn't
then I suspect that nobody does, at least not as simply as it was described.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604
.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
Sent: Friday, July 11, 2003 8
the database
must be closed, not open in your Protel window.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Frank Gilley
yes, ATI video cards were part of the problem back a
few years as well.
Sincerely,
Brad Velander
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com http://www.norsat.com
operation. Oh yes, ATI video cards were part of the
problem back a few years as well.
Sincerely,
Brad Velander
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com http
that doesn't connect are the 4 port connections. What am I
missing guys?
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
through the listserver in less than 5 - 7 hours in the past couple
of days. No volume of posts and it is slower than it ever was in the heydays. So much
for the wonderful support available within 15 minutes as it used to be on this list.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat
jury rigged it by doing as you do, putting netlabels on both
ends of the nets, voila connectivity. However, I should not have had to and they are
squeezed in between the sheet symbols and the next component, not pretty.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc
,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Chris Lowe [mailto:[EMAIL PROTECTED]
Sent: Thursday, July 24, 2003 1:33 AM
and definition was very
clear. I would have gotten there in a day or two when the pressure to get these boards
out subsided, but thanks again.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email
effect the drill file as
well.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Website Visitor [mailto:[EMAIL PROTECTED
three hard coded options, that is not flexibility.
Sincerely,
Brad Velander
-Original Message-
From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]
Sent: Sat 26/07/2003 3:57 PM
To: Protel EDA Forum
Cc:
Subject: Re: [PEDA] P99SE Sheet
the hide checkbox. Visibly this will hide the GND
ratsnest, not necessarily desirable but it solves the long delay issues.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http
Still running Win98 as you had stated in your earlier messages? That would be the most
common reason for your crashes if you are still running Win98. 99SE SP6 will run quite
stably on WIN2000 Pro. Pretty stable NT4.
Sincerely,
Brad Velander
-Original Message-
From
with
a zero or negative spacing value.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
CONFIDENTIALITY: This e-mail and any attached files may contain
pin connections.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: John Branthoover [mailto:[EMAIL PROTECTED]
Sent
generating a violation. The only option would to
have no rule but this will only work in some limited cases as well.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http
Abd ul-Rahman,
can I come work for you? 8^ I'll settle for 2 - 19 monitors, beats 1 - 19
monitor.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http
more about the
jet database system than I do, possibly they will explain better or correct me if I
made any erroneous suggestion.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL
This sounds like a time to try the repair facility! Sounds like a DDB file structure
problem.
Big down arrow, Design Utilities, Repair Tab. The DDB must be closed in order to run
the repair facility on it.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave
quickly while doing the rotation. Not sure that
this could be what you have seen but thought I should mention it.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http
, copper fills, copper tracks, text and other lines. The mid
location never changed as long as I didn't change the pad locations. Changing pad
locations by 10 mils resulted in the expected 5 mil shift in the mid PP point.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave
Robert,
I have heard that previously as well but I have never experienced it myself.
At least not where I realized that this was what had happened.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292
Nope Abd ul-Rahamn,
I checked the pad extents as well, changed the sizing and offsets in either
direction on the pads. No effect! Didn't test the pad rotation. I just did not mention
each and every minute detail that I checked in my earlier post.
Sincerely,
Brad Velander.
Lead PCB
.
Best advice is to search the library area of their website. Be careful though,
I would not be surprised if there were differing tracts for PEDA and DXP libraries.
Therefore you might find them but they may be for DXP newer libraries.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International
one that you don't yet have a back-up for.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Dennis Saputelli [mailto
, they
complained and actually ran the board through PP twice. Once for each board on the
panel (2-up).)
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
policy.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Tuesday
counters just scoff and won't accept them. A dollar in the bean counters hand
today is better than two dollars tomorrow.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http
heard 'rumours' (never tested it myself)
that their DDB read/write control just doesn't work reliably or properly, typical.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http
.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax (604) 292-9010
email: [EMAIL PROTECTED]
http://www.norsat.com
-Original Message-
From: Tim Fifield [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 04, 2003 12
components rather than building
them in. With built in ancillary components you will have issues creating your
schematic and BOMs because you will not be treating them as separate components.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089
of their
purchase, you should investigate this. Why start out with a legacy product which the
supplier has announced (as long as 18+ months ago) will not be supported with any bug
fixes or product improvements?
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave
are finished.*
When I am using this feature I usually unlock all the footprints using global
editing, when finished I relock them all using the global editing again.
Sincerely,
Brad Velander.
Lead PCB Designer
Norsat International Inc.
Microwave Products
Tel (604) 292-9089 (direct line)
Fax
similar to this if you lost
your printer configs that it was expecting to see.
Sincerely,
Brad Velander
PCB Designer
Xantrex Technology Inc.
(direct) (604) 415-4054
(general) (604) 422-8595 ext. 4054
(fax) (604) 422-1591
-Original Message-
From: Ian Middleton [mailto:[EMAIL PROTECTED
.
Sincerely,
Brad Velander,
PCB Designer.
Northern Airborne Technology
1925 Kirschner Road,
Kelowna, BC, V1Y 4N7.
(250) 763-2329 ext. 225
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
. All the designators are centered and thus have some weird
coordinates.
Sincerely,
Brad Velander,
PCB Designer.
Northern Airborne Technology
1925 Kirschner Road,
Kelowna, BC, V1Y 4N7.
(250) 763-2329 ext. 225
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto
501 - 558 of 558 matches
Mail list logo