In a message dated 10/27/2003 2:04:45 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
We have a pcb that has both analog and digital circuits and consequently we
have assigned a ground to each type (AGND and DGND). I need to join both of
these to a common point on the pcb which is the
In a message dated 11/18/2003 4:19:53 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
The Protel 99SE has a Report Generating Mechanism for BOM
creation.
I want an add-on utility or a process script that can separately count the
number of SMD and Through-hole components. Can
In a message dated 11/22/2003 4:03:45 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
Is there a way to do this in Protel? I want to select an entire group
of tracks, and change all the tack widths to one regardless of their
current width. Can anyone assist me?
I'm surprised
I find it hard to believe that I've had this wheel mouse for two years now,
and still neither I nor anybody else who has posted to this forum has found a
way to make the wheel run the zoom in/out function under Protel. The mouse is
just sending scroll bar messages to Windows; all that's needed
I looked for a new one but found nothing. Do you know of one?
In a message dated 12/16/2003 9:39:46 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
What about updating the mouse driver?
--- [EMAIL PROTECTED] wrote:
I find it hard to believe that I've had this wheel
mouse for two
In a message dated 1/5/2004 2:40:04 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
I need to place two large components on a pcb that will actually be on
spacers and connected to the main board by short wire links. As the items are
relatively large (one of them is one of those
In a message dated 2/17/2004 8:06:27 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
How do I put parts at 45o ? I am basically designing a moving message
board, and want to place my LEDS at 45o to make it more readable for the
matrix
You can't, in schematic. The difficulty is that
In a message dated 2/28/2004 4:17:26 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
I have a populated board which has two nets shorted to each other
during assembly. I want to view both of the nets with different colors in
Protel 99SE PCB document, so that I can locate the
In a message dated 3/9/2004 7:34:46 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
After the piece of junk I
received in the guise of DXP, they would not be seeing a dollar out of
my pocket to evaluate a new product. I am certain that I am not the
only customer who feels that way.
In a message dated 2004-03-28 03:33:51 PM Eastern Standard Time,
[EMAIL PROTECTED] writes:
I'm the guy still using Protel 1.61 (1992) with Windows 3.11 and I'm on
a phone linenow that you're through laughing my question is - my
present project requires a coil for an antenna for a prox
In a message dated 2004-04-21 08:36:32 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
I heard from somewhere it's about 0.0025 Volts per millimeter, but I'm not
sure under what conditions.
Are you sure that wasn't per METER? If your units are right, I've got a whole
lot of designs
In a message dated 2004-05-18 04:00:00 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
I wanted to change the layer of a segment, which was
already placed.
I can get the segment on the other layer but there are
no vias at both ends.
Is this the way it works?
Yes, but there's a
I've seen the toggling macros that result from having two pins with the same
number, where they are alternately added and deleted from the connections with
successive netlist loads. This is similar, but slightly different.
I have built a common-mode choke schematic symbol, with 4 pins each of
In the interest of getting this project moving forward, I added a port
connected to a Gnd power symbol on the throublesome sheet, and added a corresponding
sheet entry on the parent sheet, connected to a Gnd power object there. Now
the netlist works fine, with the two GND nets connected
I have a ddb with a moderately complex schematic, and was just wrapping up an
initial parts placement today in preparation for a meeting with the client
tomorrow. I attempted to use the print preview manager to print to a PDF, but
had various snafus along the way, mostly because I was trying to
I can still open PCBs in other databases, so it doesn't seem to be the Protel
installation itself. I did, however, try deleting AdvPCB99SE.Ini in the
Windows directory, to no avail.
Steve Hendrix
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL
Given the description below, a simple text editor search-and-replace seems
unlikely to work. But the outlines, as described, will differ consistently in
that the assembly drawing outline will always be the smaller of the two. Thus it
should be possible without too much difficulty to sort them
I'm cross-posting this because I'm not getting any emails from DXP, and I
know many are subscribed to both lists. I sent an email a few minutes ago
regarding an email that purported to come from the DXP list, saying that my email
server (AOL) was bouncing emails and they were putting a hold on
In a message dated 2004-07-20 11:46:57 AM Eastern Daylight Time,
[EMAIL PROTECTED] writes:
A partner in a manufacturing effort is sending us full populated
boards (ICs and passive components) that are badly warped. We sent
them back and rather than get the boards remade and repopulate them,
At risk of reopening the mouse wars of yesteryear, I need to ask what's the
best driver to install to use a Microsoft Intellipoint (Dell branded) mouse
with Protel 99SE. I had a pretty decent setup and should have left well enough
alone, but I tried to install a newer mouse with dual scroll
201 - 220 of 220 matches
Mail list logo