Hi All,
I came across this file this morning, it might
be useful to new comers to PCB design.
http://alternatezone.com/electronics/pcbdesign.htm
There is a link to the PDF file on that link.
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message
is checked.. :(
Regards,
Darren Moore
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
we are working on a board which is a substantial variant of a board
which was done in DXP (not in P2004) by someone else
my working file was saved back to 99SE which is what
Juha,
Use find similar objects to get the query started, then
make changes from there.
(ObjectKind = 'Pad') And (HoleDiameter '3')
This is based on the FSO query.
IsPad And (HoleDiameter '40')
This also works.
IsPad And (HoleSize '40')
And that too.
Darren Moore
-Original
, the same I believe, it was the
' ' that was the difference between working and not.
Darren Moore
JM
At 04:33 AM 8/24/2004, you wrote:
Juha,
Use find similar objects to get the query started, then
make changes from there.
(ObjectKind = 'Pad') And (HoleDiameter '3
in the GU0104 Shortcut Keys.pdf file.
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED
Hi All,
You can't make customs power connections, Customize
is only for the toolbar bitmaps.
Darren Moore
-Original Message-
From: Leo Potjewijd [mailto:[EMAIL PROTECTED]
Sent: Monday, 2 August 2004 18:46
At 31-7-2004 13:34, Rolf Molitor wrote:
You can edit the power symbols
Hi Bill,
On a flyer I got from Altium about Jan, it said
there were over 13,000 DXP users. Maybe they
should have a warning on the pack :P
Darren Moore
-Original Message-
From: Brooks,Bill [mailto:[EMAIL PROTECTED]
I wonder just how many licensed seats there are of Protel
Hi Dom,
He can open 99SE lib's with DXP (2004).
Darren
-Original Message-
From: Dom Bragge [mailto:[EMAIL PROTECTED]
Can anyone give me a quick tip on how to go about this?
I have some decent inhouse 99SE libs but some staff (not all: inc me)
have n't yet converted to P2004
Hi Stephen,
If you are not already on the DXP list I would recommend
you join, there have been lots of small important changes
since DXP SP2.
Darren Moore
PS The DXP list is an Altium list, go to there web site
to sign up.
-Original Message-
From: Stephen Noftall [mailto:[EMAIL
I believe Altium develops their products on the Delphi platform, and so I
guess that makes them a different breed right off the start.
- Original Message -
From: Stephen Noftall [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Saturday, June 26, 2004 9:31 AM
Subject: Re:
Joe/John,
Just curious, do you guys work from home doing contract PCB design? This is
something I would like to do if there are such opportunities.
Darren
- Original Message -
From: Joe Sapienza [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Friday, June 25, 2004 10:33
remember
the hidden downsides:
1) newer versions of software usually use more disk space;
2) run slower (Protel seems to be taking the queue from Microsoft and
churning out bloatware);
3) use more system resources;
4) often require unlearning and re-learning
Darren
- Original Message -
From
of how to get around this deficiency in Protel?
Thanks,
Darren
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL
would be appreciated. The reason I want to transfer OrCAD schematics to
Protel, is that I want to use OrCAD for doing the simulations, and Protel for the PCB
development (for me the simulation capabilities in Protel are inadequate).
Thanks,
Darren
of queries, they
only get easier over time. That's not to say
that sometimes the 99 way will be quicker to
do.
Darren Moore
-Original Message-
From: Forum Member [mailto:[EMAIL PROTECTED]
John - Augh! No wonder I couldn't do this simple global
edit. I don't
have any queries
Mira,
If you mean while placing a track, press the '*'
key, use the tab key to change the size.
Darren Moore
I saw it, Abd.
The Filter menu also looks familiar. Good, good. I'm
gonna like it.
Well, if dreams come true, I may not go to bed
tonight.
I wonder... how do you, guys, move
Mira,
Hold down the control key and drag.
Darren Moore
-Original Message-
From: Mira [mailto:[EMAIL PROTECTED]
snip
Should I ask if there is a drag wire feature? When I
move the symbol it's no longer connected. Wires are
just lines and editing takes a little bit longer than
Hi All,
This break wire feature is new to dxp, 99 had
no break function at all.
Darren Moore
-Original Message-
From: John A. Ross [RSDTV] [mailto:[EMAIL PROTECTED]
-Original Message-
From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]
snip
Even
Dean,
Check to make sure Mech4 isn't checked in the menu.
File
Fabrication Outputs
Gerber Files
Layers (tab)
On the right side on the dialog box, Mech Layer to Add
to All Plots.
Above is for DXP, 98 and 99 have the same function in
the print menus.
Darren Moore
-Original
need 4
layer. Also, 1 PCB to the next with gap sizes typically
under .2 inch. (this is for super high voltage separation, in
the 5-50KV and above when PCBs edges are coated.)
_
Brian Guralnick
Darren Moore
Hi Mike
Try 'IsDesignator and Hide' as a query, then go to
the inspector and change.
Darren Moore
-Original Message-
From: edsi [mailto:[EMAIL PROTECTED]
Thanks Phillip
Thats the way I thought it should work but the
autopositioning features and text edit features dont
allow common children to be shown.
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED
a
few bits that just don't work. The users in the beta program get
to throw there 2 cents in and many changes are made, 2004 has
many of the users requests in it, from the emails list as well.
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto
Ian,
The buttons work, but the shortcut keys don't, they
have used the same keys twice, as in ALT O, was All
Off, now selects the Other Layers listooop's
Darren Moore
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
On 01:58 PM 18/03/2004, edsi said:
Here
Hi Dean,
Sounds like a problem caused by the double click speed
for the mouse, have a play with it, control panel, mouse
etc...
Darren Moore
-Original Message-
From: Carpenter, Dean [mailto:[EMAIL PROTECTED]
Hi All -
OK, this is an odd one ... Recently 99SE started
what P2004 is like, everyone
should have it in the next couple of weeks. Make your
comments then about it. They have addressed many of
the items that users have been requesting. Maybe not
every one though.
Darren Moore
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED
Thanks Brian,
Sounds like about what I'm after in my next box,
due to get a new computer soon.
Fast boot, about time..
Darren Moore
-Original Message-
From: Brian Guralnick [mailto:[EMAIL PROTECTED]
2 other things,
It completely boots right to the XP password prompt
What is needed next is a gap height, under components
also, so with that and the height value, small components
can be placed under high components. Then there's the
problem of the gap not being the same for the whole
component, hmm, full 3d model next... yike
Darren Moore
-Original
Hi Adeel,
I would select one net and change it to an unused
layer, with its own colour, then do the same for
the other net.
Although I have always found shorts using a ohm
meter on a milli-ohm scale, you can narrow it
down to a small area very quickly.
Darren Moore
-Original Message
Hi Joe,
Yes, not related to Altium, see this link
for details. Says pricing starting from
$600.00. looks like that is for double
sided boards.
http://www.konekt.com/
Regards,
Darren
-Original Message-
From: Joe Sapienza [mailto:[EMAIL PROTECTED]
Mike,
This is a separate
, it was the most expensive
computer I every owned... he he
Darren
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL
Hi Tony,
Leaving it on is being nice, let get hot and cold, every
day..
Darren Moore
-Original Message-
From: Tony Karavidas [mailto:[EMAIL PROTECTED]
I've been buying a few things from this vendor, so now I'm on
the sucker
list. (they are legit, I opt-in on this one. I
..
Darren Moore
PS If an email is longer then the row of *** at the bottom of
this message, I rarely read it unless the first few lines
capture my attention.
-Original Message-
From: Tony Karavidas [mailto:[EMAIL PROTECTED]
Sent: Sunday, 23 November 2003 09:16
Why? The way I read
later and still many outstanding
issues with DXP.
Bottom line, not happy as a shareholder or user.
There I have sent the email that I have intended
sending for months. Rant mode off again.
Darren Moore
-Original Message-
From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED
What a do know is the 200,000 ALU shares I own are
now half what I paid for them with only 2 cent
div for the last year, the IPO was at $2.00 so they
have lost several hundred million of shareholders
money..
Darren
-Original Message-
From: Abd ul-Rahman Lomax [mailto:[EMAIL
Not sure where that number comes from, but Altium
sales where around 50 Mill AUD or 35 Mill USD, for
2002.
Darren
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
interesting
what is that in US$ ?
at the 12 mil level double is a lot!
good article, eh
Zhang,
Press Shift Space to toggle through the wire placement
modes.
Darren
-Original Message-
From: Mr. Zhang Yangtian [mailto:[EMAIL PROTECTED]
Sent: Sunday, 14 September 2003 12:15
In my protelDXP schematic design work, I want to draw a bus
object with some 45-degree
Hi Dennis,
I don't have confirm to delete enabled, so if I do
by mistake delete a file I use undo, or may have
to go to the recycle bin, I leave files there for
the last month or more. Sometimes handy to get an
old copy of a file. Can't remember the last time
I have used it though..
Darren
Should be able to remove the open command from Explorer
file options for DDB file types, that may stop it from
opening 99.
Darren
On 09:08 AM 1/09/2003, Dennis Saputelli said:
i know
it is relatively easy for a program to check for another instance
of itself and either allow or disallow
Hi Dennis,
BNC 'Baby N connector' is what I was told many years ago...
Darren Moore
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
yes the B is technically (or should i say pedantically)
wrong in all cases except the DB25
i used to know the correct ones
Dennis,
See if you can run it from the tools menu...
Tools
Macro
Macros..
and select the
'Bom sorter.xls'!BOM_sort
from the list, it should be there.
Darren Moore
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]
but now it won't run at all
then before would still
stop with the error 'Run-time error '9': Subscript out of
range' at line 106 ..
'ReDim Preserve types_array(UBound(types_array) - 1)'
UBound(types_array) with a value of 0
A step by step run through the process readme file would
help.
Regards,
Darren Moore
, out of a run of 2000 odd
only about 20-30 passed the testing process...
BTW, guess which of the 3 installers was the first to get fired?
A hint: he posts messages to the Protel EDA lists...
The other guys are properly still there too. :)
Darren Moore
Graham,
Try the Templates.ddb in the system directory.
Darren Moore
-Original Message-
From: Graham [mailto:[EMAIL PROTECTED]
Hi All
Protel 99SE / SP6
I need to begin using the Protel Client Basic language and have gone
through the extensive help files on macros
You can never have enough, just stop at what you can afford...
I have two x 21 1600 x 1200 @ 85Hz, the IBM monitor has more
pixels than my two together... now that IBM would cool :)
Darren Moore
-Original Message-
From: Julian Higginson [mailto:[EMAIL PROTECTED]]
BTW, I'm
Sale pulled by the seller, gone, stopped, no more ???
Darren
-Original Message-
From: JaMi Smith [mailto:[EMAIL PROTECTED]]
Just when you thought there was no more fun to be had on
ebay bidding on
Protel 99 SE, wouldn't you know it that someone else just had
to put up
Julian,
The parts will (can) swap when you re-annotate the schematic
the best you can do is get them the way you want them and only
re-annotate '?' parts after that.
Darren Moore
-Original Message-
From: Julian Higginson [mailto:[EMAIL PROTECTED]]
Hey all,
An interesting
Dennis,
Is that:
Tools
Interactive Placement
Position Component Text
It's been there all along, mind you I don't remember seeing
it before either.
Darren Moore
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
i was proteling (PCB) and flailing away
send you a
copy.
Darren Moore
-Original Message-
From: Rich Thompson [mailto:rich.thompson;blueyonder.co.uk]
Hi
I sometimes miss silkscreen printed over component pads, is
there a rule
to look for this in 99SEsp6?
Thanks
Rich
Hi Dennis,
The training was for making servers, they gave out the
source code at the time. I'm not sure what the copyright
situation is. I have pasted a copy of the readme file
below that explains what the 3 functions do. It was for
P98 but works fine in P99SE.
Darren Moore
Here is a copy
Shuping,
In DXP there is a rule scope 'InRegion' this can be
used to set different rules to an area, like under
a BGA. You use a Query with any rules to set the
region for the rule to work in, or Not in.
Darren Moore
-Original Message-
From: Shuping Lew [mailto:[EMAIL PROTECTED
2 x 1600 x 1200, 32b colour,
LARGE FONTS.
Darren Moore
-Original Message-
From: Julian Higginson [mailto:[EMAIL PROTECTED]]
snip...
My guess is I need a good FSB speed more than I need the
fastest processor.
I'll need at least 512Mb of RAM. I'll need 7200rpm drive
speed
Terry,
Select All Vias _and_ Selected Objects only.
Darren Moore
-Original Message-
From: Terry Creer [mailto:[EMAIL PROTECTED]]
Greets all,
I'm having a prob at the moment. I can't seem to add
teardrops to certain SELECTED vias only.
I've tried Teardrops
.
DXP has dropped the database system and just stores the files
on disk as any normal file, one file per document.
Darren Moore
-Original Message-
From: Alfonso Baz [mailto:[EMAIL PROTECTED]]
Sorry about this late reply
Thanks Brad
I am a programmer and I wasn't aware that protel
Jun,
Altium have said that they will have a SDK for DXP but it
is not available yet. DXP is written with Delphi 6, I believe
so the old SDK may not work with DXP.
Darren Moore
-Original Message-
From: Jun Gong [mailto:[EMAIL PROTECTED]]
Does anybody knows where to download Protel
JaMi,
You could tent the via and place 360 degree arc on the
bottom solder mask over the via's that you don't want
covered.
Darren Moore
-Original Message-
From: JaMi Smith [mailto:[EMAIL PROTECTED]]
Hi All,
Can I selectively tent only one side of a via, without having
I have done this for years, no DRC problem at all with
small pads on the top layer and large on the bottom, this
is a great way to get some real estate back for tracks etc...
Darren Moore
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]]
On 07:50 PM 19/09/2002 +0100
Rob,
I think the problem is that you should use place line,
this doesn't have the same issue as you are using place
interactive routing which of course could not work on
a layer that is not copper as Shane says below.
Darren
-Original Message-
From: Shane Edwards [mailto:[EMAIL
been able to run it to run full
screen, only 320 x 200 and 4 colours
I have uploaded a screen shot to the files area.
http://groups.yahoo.com/group/protel-users/files/
Who needs DXP when I have this :)
Darren
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED
Hi Terry,
No crash here with two mech and multilayer on, it just
toggles through the 3 layers enabled?
Darren
-Original Message-
From: Terry Creer [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 11 September 2002 12:22
I just discovered this.
I had all copper layers turned off
to 255mil
pad/via 1 to 1000mil
max nets 1000
pads 48 types
cheers,
Darren
-Original Message-
From: Joe Sapienza [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 11 September 2002 13:01
To: Protel EDA Forum
Subject: Re: [PEDA] Protel clone on the way?!?!?!
Darren,
I seem to be remembering
1 and 2 plus multilayer enabled, display set
to All final.
And of course I have my clock set back at 1992 :) (Joke Joke Joke
'don't hit me')
Darren
Terry, Darren, Tony,
OK, lets' look at some stats here.
Darren, you say you did not crash or lock up, what OS are you
running on
what type
.
Ever since I installed SP8 it my 99 runs perfectly :) (I can't help
myself)
Cheers,
Darren
Hi Terry,
No crash here with two mech and multilayer on, it just
toggles through the 3 layers enabled?
Darren
Are you using '*' ot '+' key to toggle through the layers. Have you
remapped
Hi Brian,
You should try getting some say 100pf 0603 cap's as close to
the load as possible, maybe change the 100nf for smaller
values also. The main pulse you are triggering on has a period
of about 4nsec's (250Mhz).
Darren Moore
-Original Message-
From: Brian Guralnick [mailto
Note new firmware version 3.22 includes the ADVTRG and
the FFT modules. I could only afford the TDS3052 :(
Darren Moore
-Original Message-
From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
(Nice scope shots...I have a TDS3054 too...great little scope
If you have installed DXP then most of these PDF files
are already on your hard drive in the help directory.
Editing Multiple objects.pdf is the only one I didn't
have already.
If you are new to dxp then most of then are worth a read.
Darren Moore
There's a bunch of DXP tutorials, etc
to be careful what you ask for as you may get it :)
Darren Moore
* Tracking #: B9CE177228103F4BBBD5A90FCAD734CAEB2550A1
much faster
your computer would be without the polygon.
Darren Moore
-Original Message-
From: Michael Reagan (EDSI) [mailto:[EMAIL PROTECTED]]
Something I forgot to mention:
If the parts are surface mount then the internal plane has
no hog-outs at
all for the pads
Hi Edi,
The email I received is plan text, I'm using Outlook 2002.
Darren Moore
-Original Message-
From: Edi Im Hof [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 30 July 2002 23:02
To: Protel EDA Forum
Subject: [PEDA] OT: HTML
Hi all
I'm tweaking my Eudora.
Does this mail
The file for the toolbar is at the following link:
http://groups.yahoo.com/group/protel-users/files/
Sorry, I wasn't clear about where I uploaded the
file to. The zip file includes an readme file with
details on how to install it.
Darren Moore
-Original Message-
From: Darren
Tony,
Look under the macros tab, for a macro called pdblayer.bas this
is in my templates file but you may have to search you HDD for
it... That should get you going.
Regards,
Darren
-Original Message-
From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
I finally decided I want
Tony,
Here is a macro to do what you want, just assign it to
a button.
Darren
'---
---
'
' Macro Language : Client Basic
' Name: ToggleTopOverlay.bas
' Function: Each call will toggle the Topoverlay layer on/off
Tony,
Do I have to everything for U :)
Add this to the end of the parameters text.
|$Description=Toggle Top Overlay
Right click on the new button, right properties, then
right click properties one more time. Wack it in there.
Darren
-Original Message-
From: Tony Karavidas [mailto
the common layers that I
use and for the bitmap will just have a square of
colour, the same colour as the layer it toggles.
i.e. Yellow, Red, Blue, green, violet etc, I'm forever
opening the layer dialog.
Darren
* Tracking
That may be so, but it was not the way the real
release had had it, it was made by me after I
cut and pasted it from the pdf file. The formatting
was screwed up and so was my editing.
After all, english is not my first language, I speak
in electronic schematics normally ;-)
Darren Moore
Release to the Australian Stock Exchange earlier:
SYDNEY, Australia -July 22, 2002 - Altium Limited (ASX: ALU),
a leading developer of Windows-based electronic design and
development software, is pleased to announce there release
of
Here is a link to the Australian Stock Exchange where
the original release come from. The cut and paste did
have some problems???
http://www.aspectfinancial.com.au/asxpdf/20020722/pdf/00305689.pdf
Darren Moore
-Original Message-
From: Darren [mailto:[EMAIL PROTECTED]]
Sent: Monday
Andreas,
As far as I know, save as ASCII supports all without
any loss.
Darren Moore
-Original Message-
From: Andreas Lipowsky [mailto:[EMAIL PROTECTED]]
Does there exist any information about the protel pcb 4.0
binary file format. What we want to do, is to generate
Charlie,
I think you have the port like OrCAD on its in one of
the preference settings.
Darren Moore
-Original Message-
From: Jenkins, Charlie [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, 3 July 2002 23:08
To: 'PEDA'
Subject: [PEDA] Port length will not change
I seem to have
Ivor,
Sure there is one very important thing to do..
Make sure you never loose where this list is :)
Darren
-Original Message-
From: Ivor Davies [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 30 May 2002 02:09
To: Protel Forum Ask (E-mail)
Subject: [PEDA] Good default settings
Linden,
It maybe a 2SC1623 or 2SC2812 NPN device.
This info is from the book:
Up-To-Data Worlds
Transistors IC'c
It has listings with the device markings.
Darren Moore
-Original Message-
From: Linden Doyle [mailto:[EMAIL PROTECTED]]
Sent: Friday, 31 May 2002 15:07
To: PEDA
From the Protel home page...
Protel DXP is released
for external beta testing
and Altium announces
Protel DXP pricing
Read media release
See Protel DXP pricing
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED
Phil,
I opened the ddb and exported the library, then opened
the library in Protel 98, 98 would close (shutdown) same
as P99SE.
Looking at the lib file with text editor (UltraEdit)
it looks like the end of the file is missing.
Regards,
Darren Moore
-Original Message-
From: Phillip
it was DLL related.
Regards,
Darren Moore
PS new computer:
P4 2G, 1G DDR RAM, MATROX DH G550 graphics card (very slow)
the GeForce 2 on my old machine was much much faster.
2 x 80G 7200 HDD raid mirror setup with a MSI 845 Ultra
main board (raid, USB2,)
-Original Message-
From: Stephen Casey
,
originally announced for a Q1 release but now scheduled for
July 2002, has also contributed to the modified revenue estimate.
-
Sorry for the bad news,
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post
Linden,
You can set the 'Default Template File' on
the schematic Tools Preferences dialog box
Schematic Tab.
Darren
-Original Message-
From: Linden Doyle [mailto:[EMAIL PROTECTED]]
Thanks Tom,
That seems to find the file although I still have one niggling bug...
When I
as yet.
We do expect it before June 2002 though.
The upgrade price has yet to be set, however it will most
probably be around the $2195 mark (this is a guess on our part).
So it looks like we are not going to see it for a while yet.
Still waiting.
Darren Moore
Warning
Unable to process data:
multipart/mixed;boundary==_NextPart_000_0014_01C1CC02.A9555FB0
Mark,
Sorry I should have checked it first.
Looking further
It was part of the training Seminar Examples. I have it
installed in my P98 install, but not in P99SE. I am not
sure if you can install it in 99 but if you have it you
could try.
Darren
-Original Message-
From: Mark
Mark,
I just copied all the files 'training.*' to my P99
system directory. Then installed the server with
the big arrow menu. Once it was installed the
training menu under help was also installed.
Didn't take long once I found the which files it used.
Darren
-Original Message-
From
I also just opened a flyer (4 page thing)
and the release date for the new package
is early 2002 (i.e. not 1st quarter)
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
to which layers are used
for what.
Just my 0.02,
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL
separate move commands for each type of object.
Track, Text, Polygon, Pad, Via etc. This also helps stop
having to select from the list of items when there are multiple
objects at the same place.
Regards,
Darren Moore
Thanks for your post ( and all who suggested same),
I did the re-install earlier
Dennis,
Me again, I have shortcuts in the My Documents folder to all
my area's that I have files. So it opens My Doc then I double
click the shortcut to the area I need to go to.
Regards,
Darren Moore
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
Sent
generator GOLD)
You may have to register with yahoo to get access.
If you what the spiral track to move as one item, then
you should make a new library footprint and cut the
spiral from pcb and paste it into the library.
Regards,
Darren Moore
Seconded,
Darren Moore
-Original Message-
From: Thomas [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 19 February 2002 19:21
To: 'Protel EDA Forum'
Subject: Re: [PEDA] Writing messages all day . . . hopefully,
the final re sponse . . .
For Christs sake Jami get off his back!
He
or some other problem and was not
the fault of Protel. Lets see how you new machine behaves.
Happy installing,
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com
friends at MS.
The problem was that after using the wheel all the shortcuts stopped
working. What problem are you referring to.
Regards,
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
in speed if a higher clock speed or more advanced processor
(such as an 80286 or 80386) is used.
Feeling my age,
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers
that I have held my age well :)
Yes 1986 is what I should have typed.
Darren Moore
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager
1 - 100 of 127 matches
Mail list logo