Re: [PEDA] Gold or silver plating

Thanks for all the help guys. In the end I went with gold plating, and specified that the PCB's are delivered heatshrinked in plastic. Wayne Bickers Electronics Engineer Tru-Test Ltd -Original Message- From: Waldemar Kulajew [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, 24 April 2002 5

Re: [PEDA] Severe library sharing problem

at the end of the day. All the saves are made, and there are no messages popping up, although this may be an option that I have turned off at some point. Good luck figuring this one out Wayne Bickers Electronics Engineer Tru-Test Ltd -Original Message- From: SIMM Maurie [SMTP:[EMAIL

[PEDA] Pasting simulation graph into Word

Is there a way of taking the graph that is created in the simulation module and pasting this into a Microsoft Word document? It does not seem to be as simple as using the copy and paste functions as you can do for the schematic module. Any ideas accepted with thanks Thanks Wayne Bickers

Re: [PEDA] SCHEM GROUPING, DOES IT WORK?

, but this seemed to help. I also gave up on the 'group parts together if matched by' stuff. Good luck Wayne Bickers -Original Message- From: Colin Weber [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, 12 December 2001 2:46 p.m. To: Protel EDA Forum Subject: Re: [PEDA] SCHEM GROUPING, DOES

[PEDA] None

cannot seem to get rid of it. Part of my problem is I dont know what this is really saying. Is it saying that pin 2 of FS1 cannot match to the pin 2 of the land pattern? Any help greatly appreciated; Wayne Bickers Electronic Engineer Tru-Test Limited

Re: [PEDA] None

That sounds about right to me, thanks Wayne Bickers -Original Message- From: Stephen Smith [SMTP:[EMAIL PROTECTED]] Sent: Thursday, 15 November 2001 9:52 a.m. To: Protel EDA Forum Subject: Re: [PEDA] None I use to get this a long while ago, when I was learning to use

Re: [PEDA] None

it was almost getting confused. Maybe continually trying to update the PCB for the same component made Protel get its knickers in a twist, who knows?, not me. Thanks again, and now I know what to check for next time. Wayne Bickers -Original Message- From: Jon Elson [SMTP:[EMAIL PROTECTED

Re: [PEDA] xls files

Create BOM in CSV format, Export from ddb, Open in Excel Hey Presto Wayne Bickers -Original Message- From: Wayne Trow [SMTP:[EMAIL PROTECTED]] Sent: Thursday, 15 November 2001 11:35 a.m. To: [EMAIL PROTECTED] Subject: [PEDA] xls files Hi All Ive created a BOM from

Re: [PEDA] xls files

has ever seen but I think that it would do the task. Good luck trying to work this one out! Wayne Bickers -Original Message- From: Wayne Trow [SMTP:[EMAIL PROTECTED]] Sent: Thursday, 15 November 2001 2:16 p.m. To: Protel EDA Forum Subject: Re: [PEDA] xls files Wayne Yep

Re: [PEDA] Multi-Part Components

I didnt know about this, and this is great. Its amazing what you can learn just by 'listening' into these conversations. Thanks guys: Wayne Bickers -Original Message- From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] Sent: Wednesday, 14 November 2001 10:47 a.m. To: Protel EDA Forum

Re: [PEDA] ATS

customer base (us). That would be plainly stupid from their point of view (I hope). I think that they are only trying to catch the new purchaser's, and they will probably have this as standard for any future releases. regards Wayne Bickers Electronics Engineer Tru-Test Limited

Re: [PEDA] Bad mail

Yes I get it as well, must be a problem with his service provider. Wayne Bickers Electronics Engineer Tru-Test Ltd -Original Message- From: Tony Karavidas [SMTP:[EMAIL PROTECTED]] Sent: Thursday, 1 November 2001 1:01 p.m. To: Protel EDA Forum Subject: Re: [PEDA] Bad mail

[PEDA] schematic port references

of the printout (I am printing an A2 drawing onto an A3 sheet) Yes, I have the right printer driver. Win 2000, SP6. If anybody has had simmilar problems, I would really appreciate any ideas Wayne Bickers Electronic Engineer Tru-Test Limited