Usually when you hold that footprint in the pcb editor and
press the 'L' key, the component changes the side, with mirroring
and everything.
Rene
Steve Wiseman wrote:
Hi, all.
I've been plagued with this on my last 2 double-sided boards, and it's
making things like assembly instructions
24/07/2002 11:51:24, Rene Tschaggelar [EMAIL PROTECTED]
wrote:
Usually when you hold that footprint in the pcb editor and
press the 'L' key, the component changes the side, with mirroring
and everything.
Yes - that's how it's supposed to work Unfortunately, I have components on
the
Are your Library parts built with the pads on the top or the bottom?
If you build a library part with pads on the bottom layer, when the
component is placed on the PBC it will record itself as being on the top
layer, even though all the pads are on the bottom.
-Original Message-
From:
24/07/2002 12:17:08, Paul Holland
[EMAIL PROTECTED] wrote:
Are your Library parts built with the pads on the top or the bottom?
Good call, but no, they're on the top. I use these parts on both sides of the
boards - the ones on top are fine.
Having failed to reproduce this on a trivial board,
Steve and Paul,
it dosn´t matter how the components are build. Nevertheless one should be able
to change the layer of the Designator by doubleclicking on it or on the
component.
I guess there is something realy out of range with Steves system or PCB. I
only offer to check weather this behavior
On 12:03 PM 24/07/2002 +0100, Steve Wiseman said:
24/07/2002 11:51:24, Rene Tschaggelar [EMAIL PROTECTED]
wrote:
Usually when you hold that footprint in the pcb editor and
press the 'L' key, the component changes the side, with mirroring
and everything.
Yes - that's how it's supposed to
Could you have done a global change and changed the attributes, but not the
component. I know I did this once a few years ago.
Rob
* Tracking #: F24B2F10F97C094B8B31F7E2C91D7B57891B3470
*
24/07/2002 16:52:20, Watnoski, Michael [EMAIL PROTECTED]
wrote:
I have a similar problem where the parts were moved to the bottom
layer after selecting the group and pressing L. The parts were on the
bottom but not mirrored.
Hmm - all these ways of changing layer :) All I ever do / did was hit
: Wednesday, July 24, 2002 9:41 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Bottom components with 'top' attribute set.
24/07/2002 16:52:20, Watnoski, Michael [EMAIL PROTECTED]
wrote:
I have a similar problem where the parts were moved to the bottom
layer after selecting the group and pressing L
However, I checked my edits and they did stick, so I don't know yet what
it's complaining about.
-Original Message-
From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 24, 2002 10:10 AM
To: Protel EDA Forum
Subject: RE: [PEDA] Bottom components with 'top
24/07/2002 18:11:48, Tony Karavidas [EMAIL PROTECTED]
wrote:
However, I checked my edits and they did stick, so I don't know yet what
it's complaining about.
I get an error box saying -
No other document is associated with this spreadsheet. Do not close and
reopen a spreadsheet before
14 matches
Mail list logo
