Specifically GND & Having the Browse PCB window not set to Rules, especially if you have 2 monitors...
A message from way back, but it was completely ignored. When editing a PCB, espicially with a super large net like GND. This little annoying PCB Rules / Browse PCB (window) / (set to) NETS really is the culprit. Depending on video card, it may get ridicously worse, even with really fast systems. For those of use who dont has this panel visible, or just by luck dont have it on NETS when working on PCBs when we are at a huge net like GND, will experience this super slow Protel problem. Please ignore this message once again because I must be lying or something. _____________ Brian Guralnick [EMAIL PROTECTED] ----- Original Message ----- From: "Terry Creer" <[EMAIL PROTECTED]> To: "'Protel EDA Forum'" <[EMAIL PROTECTED]> Sent: Tuesday, July 29, 2003 10:45 PM Subject: [PEDA] Analysing... > I should have added, that it only happens when I edit anything on the GND > net (the net with all the poly's). > > BTW, I'm using a P4 1.6 with 390Mb RAM Win 2k etc..etc.. > > Thanks again, > > > TC > > * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
