15, 2001 9:07 PM
To: Protel EDA Forum
Subject: Re: [PEDA] need uMAX10 footprint
this sounds ok and potentially worthwhile ($175/yr)
but what is the cost to get in initially?
Dennis Saputelli
To: Protel EDA Forum
Subject: Re: [PEDA] need uMAX10 footprint
thanks Brad
so i take it you think it is worth it?
Dennis Saputelli
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
[mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 3:47 PM
To: Protel EDA Forum
Subject: Re: [PEDA] need uMAX10 footprint
Bagotronix Tech Support wrote:
one last thought on this
it may not matter what footprint you use because when you really get
rolling and really need the chips
in case the negatives scare some designers
away from some very good parts
Madhu
-Original Message-
From: Jon Elson [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 3:47 PM
To: Protel EDA Forum
Subject: Re: [PEDA] need uMAX10 footprint
Bagotronix Tech Support wrote:
one
this sounds ok and potentially worthwhile ($175/yr)
but what is the cost to get in initially?
Dennis Saputelli
Brad Velander wrote:
Ivan,
can you point me directly towards a detail for the package size? I
will then send you the footprint I would use from SMT+ 's footprint patterns
: Dennis Saputelli [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Friday, July 13, 2001 1:21 AM
Subject: Re: [PEDA] need uMAX10 footprint
having been in such a situation before i would suggest just making your
own based on the mech dwg with pad dimensions adjusted according to your
.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com
-Original Message-
From: Bagotronix Tech Support [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 9:06 AM
To: Protel EDA Forum
Subject: Re: [PEDA] need uMAX10 footprint
SNIP
The tech industry has focused
Message -
From: Brad Velander [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Friday, July 13, 2001 12:29 PM
Subject: Re: [PEDA] need uMAX10 footprint
Ivan,
can you point me directly towards a detail for the package size? I
will then send you the footprint I would use from SMT
When I saw Ivan's initial request, I remembered using a small 10 pin package
made by Analog Devices recently.
I looked on the web, found the uMax package drawing, and compared it to the
footprint I had made for that part, and it seemed to be compatible.
I cannot now re-create where I got the
one last thought on this
it may not matter what footprint you use because when you really get
rolling and really need the chips they won't be available
it is Maxim you know :)
Dennis Saputelli
--
___
-Original Message-
From: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
Sent: Friday, July 13, 2001 11:46 AM
To: Protel EDA Forum
Subject: Re: [PEDA] need uMAX10 footprint
one last thought on this
it may not matter what footprint you use because when you really get
rolling and really need
their game plan is to throw as many part types as they can against the
wall and see which ones stick
it works for them because the real money is in very high volume for
which there is usually enough planning and time
for the smaller guys ...
Dennis Saputelli
Bagotronix Tech Support wrote:
one last thought on this
it may not matter what footprint you use because when you really get
rolling and really need the chips they won't be available
it is Maxim you know :)
Yeah, they stink when it comes to parts availability. Their parts are
great, if you can get 'em. I try to avoid
Bagotronix Tech Support wrote:
one last thought on this
it may not matter what footprint you use because when you really get
rolling and really need the chips they won't be available
it is Maxim you know :)
Yeah, they stink when it comes to parts availability. Their parts are
having been in such a situation before i would suggest just making your
own based on the mech dwg with pad dimensions adjusted according to your
experience.
there are not a lot of pins on those uMax
the slight (but important) differences in footprints are as much a
matter of the particular assy
15 matches
Mail list logo