In 99SE:
Design RulesRoutingRouting Corners
My regards,
Steve Smith, C.I.D.
Product Engineer
Staco Energy Products Co.
301 Gaddis Boulevard.
Dayton, OH 45403
Telephone: (937) 253-1191 Ext. 158
Fax: (937) 253-1723
E-mail: [EMAIL PROTECTED]
Web Site: www.stacoenergy.com
www.stacopower.com
At 01:42 AM 5/5/2004, John Girvan wrote:
thanks all for your help... i was just playing about with some tracks and
had them at 8 mil thick on an 8mil grid spaced at 8mil edge to edge and
wanted to change them to 10mil edge to edge - thus, change the grid, 'snap
to grid' and hope! more
I'm running Protel 99SE SP6 on Windows XP. Sometimes when I try to start
the auto router I get a Can't Initialize error. This most often occurs
if I'm trying to autoroute a specific net, but I'm also now getting it when
trying to autoroute All. I have a bunch of manual pre-routes I don't
At 08:12 AM 5/5/2004, John A. Ross [Design] wrote:
However I made a small test board, parent + 5 child sheets using the
same ID key.sch file in it and it does not show the error under the same
enviroment so the problem seems localised to the other design (or the
number of sheets).
Very good. Now,
On 03:55 AM 6/05/2004, Abd ul-Rahman Lomax said:
At 08:12 AM 5/5/2004, John A. Ross [Design] wrote:
However I made a small test board, parent + 5 child sheets using the
same ID key.sch file in it and it does not show the error under the same
enviroment so the problem seems localised to the other
-Original Message-
From: Abd ul-Rahman Lomax [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 05, 2004 6:56 PM
To: Protel EDA Forum
Subject: Re: [PEDA] Connectivity - Netlist issues
At 08:12 AM 5/5/2004, John A. Ross [Design] wrote:
However I made a small test board, parent + 5
On 09:51 AM 6/05/2004, John A. Ross [RSDTV] said:
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: Thursday, May 06, 2004 12:21 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Connectivity - Netlist issues
snip
John - I have been trying to follow this thread but I
Anyone had this problem occur?
using 99SE, exported the jobname.PCB file to transfer to an external
machine. exported only the .PCB file, as that is all that was req'd. after
opening jobname.PCB, on external PC and the PC it was exported from, i found
that all mechanical layers except Mech1-3