, the longest distance if not square. Unless they are alignment
pins, I would advise against using a square hole in any case.
Cheers!
Drew
- Original Message -
From: Sean James [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Wednesday, February 27, 2002 10:23 AM
Subject: [PEDA] Pads
the design and not forbidding a trusted board house to use
its resources gives me better than my specified 10% tolerance, every time.
Cheers!
Drew
- Original Message -
From: rimas
Sent: Monday, March 04, 2002 7:07 PM
hi there,
i suppose this question doesn't have to do with protel
A Telesis netlist is the closest option, if Allegro is not available.
Cheers!
Drew
- Original Message -
From: Westfeldt, Pat [EMAIL PROTECTED]
To: 'proteledaforum' [EMAIL PROTECTED]
Sent: Tuesday, March 19, 2002 11:22 AM
Subject: [PEDA] Allegro netlist
Back on the list after
.
3)
A PCB will oxidize if exposed to air.
4)
A silver immersed board can repeat the plating process up to five times.
Cheers!
Drew
- Original Message -
From: Wayne Bickers [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, April 22, 2002 6:50 PM
Subject: [PEDA] Gold
wire bond.
I would also be interested to hear any thing any one else has to say on this subject.
Cheers!
Drew
- Original Message -
From: Luo; Yu-Ming (ù¥É¯ú IAC-N) [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, May 16, 2002 9:08 PM
Subject: [PEDA] COB Layout
!
Drew
- Original Message -
From: Ian Capps [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, May 30, 2002 4:31 PM
Subject: Re: [PEDA] Systematically find unwanted antennas
I've only seen that capability in some of the gerber softwares. The old
Lavenir View2001
TANSTAAFL - There Ain't No Such Thing As A Free Lunch
http://www.apc.net/ia/scrmaim.htm
http://www.magicpub.com/netprimer/acronyms.html#T
Cheers!
Drew
- Original Message -
From: Dennis Saputelli [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Saturday, June 08, 2002 2
I second that Damn! and equate PowerBasic's attitude with those who create
a virus/worm. Wow, this upsets me!
Cheers!
Drew
- Original Message -
From: Tony Karavidas [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, July 08, 2002 12:08 PM
Subject: Re: [PEDA] OS
found out that I missed this list after I had trouble with the list
server. I hope that I am not forced to miss it again.
Cheers!
Drew
- Original Message -
From: Gavin Melville [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, July 09, 2002 6:28 PM
Subject: Re
without the SDT
library/symbols.
Drew
- Original Message -
From: Dennis Saputelli [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Monday, July 15, 2002 12:46 PM
Subject: Re: [PEDA] Protel to Orcad Schematic
can't be done as far as i know
if you find a way please let
as fruitless as mine
did.
Cheers!
Drew
- Original Message -
From: Mira [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, July 25, 2002 3:43 PM
Subject: [PEDA] Out of the office - warning message
Hi all,
I hope it's not a joke but as soon as I post a message
here, I
in 'Drafts' and closed OE6. When I reopened, HOT DAMN!
And the posts from Luo; Yu-Ming are also much easier to read.
I have been wondering about this for quite some time. Sometimes, all I need
is a swift boot to the head to figure things out. Thank you for stirring
the noodles, Ivan!
Cheers!
Drew
with any of the others mentioned
below so I cannot say one way or the other.
Cheers!
Drew
`, ,` `, ,` `, ,`
`, ,` `, ,` `, ,`
Hi all,
As promised here is a summary of PCB manufacturers that I found out
about
arguments for NOT connecting
a sheet entry called RST# to the RST# net on the corresponding sheet,
whether there's a matching port or not, but I have on numerous occasions
had problems with an unmatched entry and port causing a broken net
that's only caught by a manual combing of the netlist.
Drew
-part-field, recheck-hidden-fields mouse
dance for each and every part.
Thanks in advance,
Drew
--
Drew Lundsten[EMAIL PROTECTED] direct +1.858.882.8828
Continuous Computing Corporationfax +1.858.777.3388
9380 Carroll Park Dr, San Diego 92121 cell
,
Drew
--
Drew Lundsten[EMAIL PROTECTED] direct +1.858.882.8828
Continuous Computing Corporationfax +1.858.777.3388
9380 Carroll Park Dr, San Diego 92121 cell +1.619.847.4251
,
Drew
--
Drew Lundsten[EMAIL PROTECTED] direct +1.858.882.8828
Continuous Computing Corporationfax +1.858.777.3388
9380 Carroll Park Dr, San Diego 92121 cell +1.619.847.4251
For some reason I get all posts except my own, and I receive replies to
my posts so somebody out there gets them. Why don't I?
Drew
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This message sent by: PROTEL EDA USERS MAILING LIST
*
* Use the reply command in your email
with corresponding entries and report unmatched
instances. I think I can see how to navigate around the hierarchy, but can
anyone tell me how to get all the port names on a sheet (and sheet entry
names on a sheet symbol)?
Thanks and best regards,
Drew Lundsten[EMAIL PROTECTED] direct
I ran into this problem with pre-SP5 (SP2) on a Win98 box. I have been using
SP5/W2K for 6 months and recently moved to SP6; no designs since SP5/W2K
have had this sort of problem. Has anyone seen this behavior on SP6/W2K?
Drew Lundsten[EMAIL PROTECTED] direct +1.858.882.8828
,
the text strings hanging over the sheet edge and other artifacts.
Still better than PADS,
Drew
John Haddy wrote:
I have found that I can avoid the relocated overbars by ensuring
that PDFwriter is configured to embed all fonts, with no exclusions.
It makes the PDF a bit bigger, but at least I
and not a personal
(uncontrolled) library.
Any thoughts/advice welcomed...
Drew
Drew Lundsten[EMAIL PROTECTED] direct +1.858.882.8828
Continuous Computing Corporationfax +1.858.777.3388
9380 Carroll Park Dr, San Diego 92121 cell +1.619.847.4251
in
the .CSV version of the BOM.
Drew Lundsten[EMAIL PROTECTED] direct +1.858.882.8828
Continuous Computing Corporationfax +1.858.777.3388
9380 Carroll Park Dr, San Diego 92121 cell +1.619.847.4251
-Original Message-
From: Gene Silvernail
to figure out
how to assert one net name over another, wouldn't we?
Drew Lundsten[EMAIL PROTECTED] direct +1.858.882.8828
Continuous Computing Corporationfax +1.858.777.3388
9380 Carroll Park Dr, San Diego 92121 cell +1.619.847.4251
-Original Message
We too run 99SE on XP without any problems. In fact the better stablility
and file handling of XP has improved the performance of Protel on my system
all-round.
Drew
-Original Message-
From: Tom Reineking [mailto:[EMAIL PROTECTED]
Sent: Thursday, 8 January 2004 10:13 AM
To: Protel EDA
files I need
to panelise in Camtastic, there is no trace of the hole, except for a tiny
pin-prick on the top soldermask layer. Why is it so?
Regards,
Drew
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http
is
specified.
Thanks for your replies.
Drew
-Original Message-
From: Harry Selfridge [mailto:[EMAIL PROTECTED]
Sent: Friday, 16 January 2004 10:46 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Gerber output problems
You don't say whether or not you added the hole after you first ran a set
27 matches
Mail list logo