-----Original Message----- From: Brooks,Bill Sent: Tuesday, July 06, 2004 1:18 PM Subject: FW: TONIGHT!!! SDDC Meeting Embedded Passives
Last Reminder - The meeting is Tonight! This is it... don't forget the seminar on Embedded Passives is at Overland Storage tonight at 5:30PM to 9:00PM. Get there early! You won't want to be late. This is a different format than we have done in the past. The meeting is earlier to allow for the 3 hour seminar. We will have food and refreshments at the mid break... and coffee and dessert - so Don't eat before you come... we will have plenty of food, courtesy of Coretec. We ordered extra food so don't hesitate to bring a friend... take advantage of this great opportunity to get the inside track on adding embedded resistors and caps and other passive devices to your boards. Save space on that next tight high volume board design, be able to show the engineers how they can do it, what the pro's and con's are, and how they can make your design a success! We look forward to seeing you there. Best regards, Bill Brooks PCB Design Engineer , C.I.D., C.I.I. Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510 -----Original Message----- From: Brooks,Bill [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 22, 2004 3:42 PM To: Brooks,Bill Subject: FW: SDDC Meeting Announcement July 6th, 2004 - Embedded Passives SDDC Meeting Announcement July 6th, 2004 - Embedded Passives -YOU ARE INVITED TO ATTEND- San Diego Chapter of the IPC Designers Council is pleased to present the following: Tuesday July 6th, 2004 @ 5:30PM Richard Snogren of CORETEC presenting A COURSE ON EMBEDDED PASSIVES Learn How to Embed Resistors and Capacitors in Your Printed Circuit Boards Now! "While CAD tool providers are working on tool solutions, there is an interim gap. This gap can be easily bridged by a manual process within existing CAD tools. This course will teach the participants how to design discrete capacitors and resistors with commercially available materials that can be readily embedded into the PCB by the board manufacturer. The 3 hour course includes a review of available embedded passive resistor and capacitor materials and their related manufacturing processes. It will also provide an association of design rules and manufacturing processes. The primary focus of the course is to provide "how to" guidelines for PCB designers to implement embedded passives now. It includes a technology selection process, how to create parts, how to embed them and how to bridge the design tool gap." About Richard Snogren: Richard Snogren has a Bachelor of Science degree in chemistry and biology and over thirty-five years experience in engineering and management. During that period, Richard developed and patented ablative materials for military and aerospace use; authored numerous papers and articles on structural and dielectric materials for electronic applications; and wrote a compressive technical book entitled "Handbook of Surface Preparation for Adhesion". Richard is also a member and active participant in the Advanced Embedded Passives Technology (AEPT) research consortium, funded by the US government. He has researched and developed processes for embedding ceramic thick-film materials into organic PCB substrates. He has authored numerous papers and conducted many workshops on embedded passive technology. Snogren was co-founder and president of SAS Circuits (now Coretec Denver) a respected supplier to the aerospace and defense sectors of the PCB industry. Currently Richard is senior staff engineer for Coretec Inc., an Interconnection Manufacturing Service (IMS) provider. His responsibilities include implementation of embedded passives, as well as high reliability aerospace product development. Some comments from former attendees: "Your presentation was very helpful for me to understand the current embedded-passive technology... I'd like to share my learning experience with my colleagues." - Changsup Ryu, Principal Engineer/ Ph.D., SAMSUNG ELECTRO-MECHANICS CO., LTD. "I very much enjoyed the workshop you presented...It was very informative and provided me with a good foundation for this emerging technology... Once again thank you for your presentation." - Gregory Phipps - Design Manager, Advanced Interconnect Technologies, Inc. MARK YOUR CALENDAR!!! This meeting is a 'must not miss' chance for you to get all of the detailed information on how to conquer the space limitations of that next design with embedded passives! This complimentary course is being presented by CORETEC and your IPC Designers Council Chapter as part of their continuing educational outreach to designers and engineers. Don't miss this opportunity. Meeting Agenda: 5:30PM - Announcements and introduction 5:40PM - A Course on Embedded Passives - Richard Snogren 7:00PM - Break with refreshments 8:50PM - Questions and Answers 9:00PM - Adjourn Hosted by the San Diego Chapter of the IPC Designers Council This event will be held at: Overland Storage 4820 Overland Avenue San Diego, California 92123 1-800-729-8725 1-858-571-5555 Directions: >From Los Angeles: From the 5 Fwy south, take the 805 Fwy South exit on the left. Approximately 6 miles later, exit at the Clairemont Mesa Blvd. West/Clairemont Mesa Blvd. East exit. Go East. Turn right onto Clairemont Mesa Blvd. Turn right onto Overland Avenue. Overland Storage is located on the right side of Overland Avenue. >From the Border on I-5 North: From the 5 Fwy North, take the 15 Fwy North exit towards Riverside for approx. 3 miles. Then take the 805 Fwy North exit towards Los Angeles. Turn a slight left at the intersection of I-8 East/I-8 West ramp to stay on the 805 Fwy North. Take the 163 Fwy North towards Escondido. Exit at the Clairemont Mesa Blvd. West/Clairemont Mesa Blvd. East exit. Go East. Keep right at the fork in the ramp. Turn right onto Clairemont Mesa Blvd. Turn right onto Overland Avenue. Overland Storage is located on the right side of Overland Avenue. From I-15 going South: Take the Clairemont Mesa Blvd. exit and turn right onto Clairemont Mesa Blvd. Turn left onto Overland Avenue. Overland Storage is located on the right side of Overland Avenue. RSVP to <mailto:[EMAIL PROTECTED]> mailto:[EMAIL PROTECTED] by Monday, July 5th, 2004. IPC Designers Council Members will be admitted free of charge, Non-Members will be asked to contribute a $5.00 donation at the door. Contributors will get a $5.00 discount applied to their membership should they decide to join the IPC Designers Council at the event. More information about the IPC Designers Council is available on-line at <http://www.ipc.org/SanDiego/> http://www.ipc.org/SanDiego/ or <http://dc.ipc.org/> http://dc.ipc.org/ Bill Brooks PCB Design Engineer , C.I.D., C.I.I. TITAN CORPORATION DATRON WORLD COMMUNICATIONS DIVISION 3030 Enterprise Court, Vista, CA 92083 Email: <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED], <mailto:[EMAIL PROTECTED]> [EMAIL PROTECTED] Website: <http://www.titan.com/business_units/index.html?organization_id=81Tel> http://www.titan.com/business_units/index.html?organization_id=81 Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510 _______________________________________ Member of the San Diego Chapter of the IPC Designers Council Communications Officer, Web Manager <http://dcchapters.ipc.org/SanDiego/http:/pcbwizards.com> http://dcchapters.ipc.org/SanDiego/ http://pcbwizards.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
