Message-
From: Brad Velander [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 25, 2002 19:25
To: 'Protel EDA Forum'
Subject: Re: [PEDA] IPC 356 netlist
Radek,
assuming you are talking about P99SE, the IPC 356 netlist can be
generated as a CAM output in PCB. When generating
i always assumed the bd was test before solder mask (bed of nails)
i don't think a flying probe test needs the vias
Dennis Saputelli
Mike Reagan wrote:
Darryl,
I have question ...if you might be able to answer it about the 356 netlist.
I have been sending netlists to some vendors, but on
Hi all,
I have a simple question:
Is it possible to export IPC 356 netlist directly from Design Explorer 99SE?
If not, is there any other way to do it.
Thanks
Radek Kristof
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave
, DC March 6-8.
-Original Message-
From: Radek Kristof [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 25, 2002 2:49 PM
To: '[EMAIL PROTECTED]'
Subject: [PEDA] IPC 356 netlist
Hi all,
I have a simple question:
Is it possible to export IPC 356 netlist directly from Design Explorer 99SE
]]
Sent: Monday, February 25, 2002 19:25
To: 'Protel EDA Forum'
Subject: Re: [PEDA] IPC 356 netlist
Radek,
assuming you are talking about P99SE, the IPC 356 netlist can be
generated as a CAM output in PCB. When generating you cam
files you can
insert a Testpoint report. As a sub
