.
-Original Message-
From: Brad Velander [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 3 October 2002 10:51 AM
To: Protel EDA Forum List Server (E-mail)
Subject: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors.
Hi all,
I have a layout
/2002 7:29 PM
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors.
Brad, is this problem being exhibited on Protel generated net-names or
Brad defined net-names?
Regards,
Brendon
Sent: Thursday, 3 October 2002 10:51 AM
To: Protel EDA Forum List
Duplicate designators aren't an issue unless they have some manner of
getting past the ERC check for that situation.
Duplicate pin number errors are not always caught at the schematic
level ERC and can cause the alternating net connection on update.
Seems an unlikely cause since you have 14
a clean copy of the schematic
that may help?
Bob Wolfe
- Original Message -
From: Brad Velander [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Wednesday, October 02, 2002 9:30 PM
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors
that sounds like it!
i think it had that once
do a select all and see if you can drag anything out of the dungeon
Dennis Saputelli
Brock Russell wrote:
Duplicate designators aren't an issue unless they have some manner of
getting past the ERC check for that situation.
Duplicate pin
-Original Message-
From: Brock Russell [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 03, 2002 12:20 AM
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating
duplicate nets or ot her errors.
Duplicate designators aren't an issue unless they have
some
. Wolfe [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 03, 2002 6:03 AM
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating
duplicate nets or ot her errors.
Brad,
SNIP
Sorry I don't have an answer to correct the problem
but just saying I been
name till net names are also added.
Bob Wolfe
- Original Message -
From: Brad Velander [EMAIL PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Thursday, October 03, 2002 11:36 AM
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors
Hi Brad:
I misunderstood the problem as originally described, but
I have seen the duplicate net problem you describe.
Once the duplicate nets are
generated then the nets vacillate back and forth between each duplicate with
each successive update. (i.e. disconnect pinX from net y, connect pinX
certification
-Original Message-
From: Brock Russell [mailto:[EMAIL PROTECTED]]
Sent: Thursday, October 03, 2002 9:38 AM
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating
duplicate nets or ot her errors.
Hi Brad:
I misunderstood
Hi all,
I have a layout that is a little different than our norm in terms of
size and complexity. This seems to be causing some problems that I don't
normally see.
I have four schematic pages in a flat hierarchy. I have used nets and ports
global, I actually don't have any ports used at
i don't know but i will say that i am very much a latecomer to using
update PCB
it does seem pretty cool, but i got a few spooky things just like this
and went back to the old netlist load
the board wasn't huge
is there a way to destroy the handles it creates ?
(or maybe that doesn't matter)
a guess.
Tom.
-Original Message-
From: Brad Velander [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 3 October 2002 10:51
To: Protel EDA Forum List Server (E-mail)
Subject: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors.
Hi all,
I have
: Thursday, 3 October 2002 10:51 AM
To: Protel EDA Forum List Server (E-mail)
Subject: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors.
Hi all,
I have a layout that is a little different than our norm in terms of
size and complexity. This seems to be causing
: Dennis Saputelli [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 02, 2002 6:07 PM
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating
duplicate nets or ot her errors.
i don't know but i will say that i am very much a latecomer to using
update PCB
SP6 Problem with Update PCB generating
duplicate nets or ot her errors.
i don't know but i will say that i am very much a latecomer to using
update PCB
it does seem pretty cool, but i got a few spooky things just like this
and went back to the old netlist load
the board wasn't huge
-
From: Thomas [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, October 02, 2002 6:17 PM
To: 'Protel EDA Forum'
Subject: Re: [PEDA] P99SE SP6 Problem with Update PCB generating
duplicate nets or ot her errors.
On the Update Design form make sure of the following settings:
Connectivity should
:[EMAIL PROTECTED]]
Sent: Thursday, 3 October 2002 10:51 AM
To: Protel EDA Forum List Server (E-mail)
Subject: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors.
Hi all,
I have a layout that is a little different than our norm in
terms of
size
Brad, is this problem being exhibited on Protel generated net-names or
Brad defined net-names?
Regards,
Brendon
Sent: Thursday, 3 October 2002 10:51 AM
To: Protel EDA Forum List Server (E-mail)
Subject: [PEDA] P99SE SP6 Problem with Update PCB generating duplicate
nets or ot her errors.
Hi
19 matches
Mail list logo