Many thanks to all who replied with suggestions.
I checked printer settings, and both the windows default printer and the
Protel printer were set the same (local Epson Stylus Photo 1290 on USB). I
did try uninstalling the Stylus Photo that was the old default, but that
made no difference.
I'm running P99SE/SP6 on an Athlon 1.2GHz with 1Gb RAM and Windoze98SE.
This setup has been running fine for months but now I get one of a series of
errors of the 'invalid access'/'page fault' type whenever I try and open or
create a schematic sheet. This happens on old designs as well. PCB
On 08:19 PM 21/03/2003, Andy Gulliver said:
I'm running P99SE/SP6 on an Athlon 1.2GHz with 1Gb RAM and Windoze98SE.
This setup has been running fine for months but now I get one of a series of
errors of the 'invalid access'/'page fault' type whenever I try and open or
create a schematic sheet.
-Original Message-
From: Ian Wilson [mailto:[EMAIL PROTECTED]
Sent: 21 March 2003 10:50
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE crash on opening schematic
On 08:19 PM 21/03/2003, Andy Gulliver said:
I'm running P99SE/SP6 on an Athlon 1.2GHz with 1Gb RAM and Windoze98SE
I recall running into something like this. It's been quite a while ago so my
memory of it is fuzzy, but i think it had something to do with a corrupted
.rcs file. There should be a whole set of these, either in your root
directory or the main Protel directory. Try moving all of them somewhere
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: 21 March 2003 11:32
To: [EMAIL PROTECTED]
Subject: Re: [PEDA] P99SE crash on opening schematic
I recall running into something like this. It's been quite a
while ago so my
memory of it is fuzzy, but i
Andy Gulliver wrote:
snip
I've tried an uninstall/reinstall of Protel to no effect. There is no
obvious corruption of the Advsch99SE.ini file.
snip
Have you done full reinstall?
If installing latest MDAC drivers won't help try full reinstall according
to the procedure posted by Brad Velander a
-Original Message-
From: Wojciech Oborski [mailto:[EMAIL PROTECTED]
Sent: 21 March 2003 12:08
To: Protel EDA Forum
Subject: Re: [PEDA] P99SE crash on opening schematic
Andy Gulliver wrote:
snip
I've tried an uninstall/reinstall of Protel to no effect
PROTECTED]
http://www.norsat.com
-Original Message-
From: Andy Gulliver [mailto:[EMAIL PROTECTED]
Sent: Friday, March 21, 2003 1:20 AM
To: Protel EDA Forum
Subject: [PEDA] P99SE crash on opening schematic
I'm running P99SE/SP6 on an Athlon 1.2GHz with 1Gb RAM and
Windoze98SE
: [PEDA] P99SE crash on opening schematic
Andy,
I have seen similar difficulties with schematics in days
gone by if you lost your printer connection. I know that you say
you can still print PCB outputs but did your printer(s) in some
way change recently (or your schematics are set
: [PEDA] P99SE crash on opening schematic
Andy Gulliver wrote:
snip
I've tried an uninstall/reinstall of Protel to no effect. There is no
obvious corruption of the Advsch99SE.ini file.
snip
Have you done full reinstall?
If installing latest MDAC drivers won't help try full
11 matches
Mail list logo