I've got a small PLD in my design that I'd like to incorporate in the
schematic heirarchy directly. I have a schematic for my PLD design and a
P16r4 part symbol in my main schematic, but that leaves the PLD
schematic as separate (i.e., not in the schematic heirarchy). Is there a
way to represent the PLD schematic as a symbol that I can then create a
sheet symbol (or part symbol) from to paste into my schematic heirarcy?
I've tried create symbol from sheet but it gives me a symbol without
any ports.
On a related issue, I am also having trouble finding a particular
footprint that the Protel web site says exists. For the P16r4, the web
site says there are three valid footprints: DIP20, PLCC20, and FL20. I
cannot find the FL20, nor, for that matter, a manufacturer that claims
to offer that package for a 16r4 part. If anybody has some familiarity
with these parts, please educate me.
--
Name : Bryn Wolfe
Title : Robotics Engineer
Dept : Texas Robotics Automation Center (TRACLabs)
Company: Metrica, Inc
Addr : 1012 Hercules Drive
Houston, TX 77058-2722
Voice : 281-461-7886
NASA : n/a
FAX: 281-461-9550
Web: http://www.traclabs.com
Email : mailto:[EMAIL PROTECTED] or
mailto:[EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Forum Guidelines Rules:
* http://www.techservinc.com/protelusers/forumrules.html
*
* Browse or Search previous postings:
* http://www.mail-archive.com/proteledaforum@techservinc.com
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *