Hello everybody,
we have some problems when pouring polygons.
On our multilayer board the top and bottom layer should be connected to GND.
For that purpose we have placed polygons on both layers.
The polygons are connected to the GND net.
The pads should be surrounded by arcs.
Grid Size = 0.2
.
Regards
Andy Gulliver
-Original Message-
From: Florian Finsterbusch [mailto:[EMAIL PROTECTED]]
Sent: 05 September 2001 08:56
To: Protel EDA Forum
Subject: [PEDA] Problems when pouring polygons
Hello everybody,
we have some problems when pouring polygons.
On our multilayer board
On 09:56 AM 5/09/2001 +0200, Florian Finsterbusch said:
Hello everybody,
we have some problems when pouring polygons.
On our multilayer board the top and bottom layer should be connected to GND.
For that purpose we have placed polygons on both layers.
The polygons are connected to the GND net.
At 09:56 AM 9/5/01 +0200, Florian Finsterbusch wrote:
On our multilayer board the top and bottom layer should be connected to GND.
For that purpose we have placed polygons on both layers.
The polygons are connected to the GND net.
The pads should be surrounded by arcs.
Grid Size = 0.2 mm, Track
