Hello, all, I routed a board in Specctra(we did not purchase the miter option in the package) and imported the board back to Protel SE99 SP6. Now I go to Tool/Miter Corners to route all the corners to 45 degree. But guest what happened? The router removed almost all the fan out traces on bottom layers.
I then first tried to lock both top and bottom layers, and set up the design rule to whole board, 45 degree, from 1mil to 200mil. It doesn't work. Then I also tried to setup each middle layers, 45 degree, 1mil to 100 mil, the whole board was routed as round corners. I wonder if anybody has experienced that problem, and any work around for that problem. Thank you for any reply in advance... Shuping Lew Quintron Systems, Inc * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
