The nodes for the controlling input of the controlled sources are set in
brackets in the models supplied from analog devices, like Gx 1 0 (2,0) 1
Try without brackets like Gx 1 0 2 0 1.
The analog models from protel are ok like this.
I think there is an article in the protel knowledge base that describes how
to use their model librarys.
i2e / R.Molitor
-----Urspr ngliche Nachricht-----
Von: Thomas Ebert <[EMAIL PROTECTED]>
An: Multiple recipients of list proteledausers
<[EMAIL PROTECTED]>
Gesendet: Mittwoch, 7. Februar 2001 11:44
Betreff: Re: [PROTEL EDA USERS]: Q:Adding Spice Models
> > The "parameters" you listed are just names of controlled sources. That
can
> > not be the problem. The analog devices models look ok, they are pure
spice
> > and should work. There must be something else what makes your
simulations
> > fail. What about your windows default decimal separator ? European
> > installations use the "comma", protel needs the "dot".
>
> The decimal separator is set to "dot". Models from Protel are working fine
> during simulation.
>
> > Why did you fetch
> > the model from analog because they are supplied directly from protel
with
> > their analog devices library ?
>
> Perhaps I copied the Analog Devices library to the wrong location ?
> I tried ...\Library\Sch\ , ...\Library\Sim\ and also ...\Library\Sim\
> Analog Devices\ . If I add the lib to the schematic editor, I can select
> the parts and use them in the schematic. If I try to simulate the circuit,
> the simulator tells me that it can not find the model in ...\Sim or
> .....\Sim\Analog Devices\ .
> That is the reason why I dropped the external model there. The simulation
> works if I put the unknown sources in the spice netlist into comments -
> but this is not a real solution. is it ?
>
> If the AD lib is working correct, what do I have to do with it ?
>
> Cheers, Tom
> e-mail: [EMAIL PROTECTED]
>
>
>
>
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
> * This message sent by: PROTEL EDA USERS MAILING LIST
> *
> * Use the "reply" command in your email program to
> * respond to this message.
> *
> * To unsubscribe from this mailing list use the form at
> * the Association web site. You will need to give the same
> * email address you originally used to subscribe (do not
> * give an alias unless it was used to subscribe).
> *
> * Visit http://www.techservinc.com/protelusers/subscrib.html
> * to unsubscribe or to subscribe a new email address.
> * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This message sent by: PROTEL EDA USERS MAILING LIST
*
* Use the "reply" command in your email program to
* respond to this message.
*
* To unsubscribe from this mailing list use the form at
* the Association web site. You will need to give the same
* email address you originally used to subscribe (do not
* give an alias unless it was used to subscribe).
*
* Visit http://www.techservinc.com/protelusers/subscrib.html
* to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
________________________________________________________
To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'
More Information : http://www.dolist.net
