PROTECTED]
To: 'Protel EDA Forum' [EMAIL PROTECTED]
Sent: Monday, October 14, 2002 2:21 PM
Subject: Re: [PEDA] Keepout Fills Not Working After Movement 99SE
Rusty,
this sounds very similar to a bug that I have run across with
keepout lines. At some point, possibly when you moved the fill, did
, 2002 9:28 AM
To: Protel EDA Forum
Subject: Re: [PEDA] Keepout Fills Not Working After Movement 99SE
All the fills started out as No Net, the fills that
would not work
took on the GND net. There was no obvious reason like
overlapping vias that
would explain why they did. I'll try
The board originated in 99SE SP6.
Rusty Land
- Original Message -
From: Larryregnier [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Tuesday, October 15, 2002 9:37 AM
Subject: Re: [PEDA] Keepout Fills Not Working After Movement 99SE
Rusty,
Was this board
At 09:48 AM 10/14/2002 -0700, [EMAIL PROTECTED] wrote:
I have a board with 9 Keepout areas meant to keep out a copper plane
pour on the top side. The first time the copper is poured the areas are
kept copper free. But after selecting the fills and moving them aside
when they are
Rusty,
this sounds very similar to a bug that I have run across with
keepout lines. At some point, possibly when you moved the fill, did it take
on a net when it came in contact with a net? Now you have changed the net
name back to no net?
Here is the suggestion. With your fills