I'm the first time trying to do a multilayer. I've set up the middle two layers as GND and VCC. Both layers are split. I therefore placed tracks through them.
Use "Design|Split Planes..." and add the splits there. They're defined like polygons.
Common tracks on all layers were placed as keepout. Upon a printout, I found that middle layer don't have keepouts.
Yes, that's because you don't need them :-)
If you like to pull back the planes at the edges of the print (I allways do), place a track around the board. You are on a negative layer, so the planes will go as far as the universe reaches. I usually copy the Mech1 (Board Outline) to the mid layers and make all tracks (and arcs) 2mm wide if I want a pull-back of 1mm.
Edi Im Hof
Is it therefore true that a keepout track only works when doing a GND pour ?
Rene -- Ing.Buro R.Tschaggelar http://www.ibrtses.com Your newsgroups @ http://www.talkto.net
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + IH electronic + Phone: ++41 52 320 90 00 + + Edi Im Hof + Fax: ++41 52 320 90 04 + + Doernlerstrasse 1, Sulz + URL: http://www.ihe.ch + + CH-8544 Rickenbach-Attikon + E-Mail: [EMAIL PROTECTED] + + Switzerland + + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/[EMAIL PROTECTED] * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *