Hello all,
I originally posted this message/complaint when 99 first was released and
thought the problems have since been fixed. On very large designs, mine was
18,000 nets, 99SE with SP6 installed took 6 hours of 600MHZ computer time
then hung up.The machine has 512 meg of ram. I wasted
.
Mike Reagan
EDSI
Frederick MD
- Original Message -
From: Rob Malos [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Thursday, March 15, 2001 8:05 PM
Subject: Re: [PEDA] Netlist will not load
Michael,
You are not alone with having experienced this problem. I
has not been resolved thru a two releases and 6 service
packs.
Thanks
Mike Reagan
EDSI
- Original Message -
From: Abd ul-Rahman Lomax [EMAIL PROTECTED]
To: Protel EDA Forum [EMAIL PROTECTED]
Sent: Friday, March 16, 2001 2:03 AM
Subject: Re: [PEDA] Netlist will not load
At 09:20 PM 3/15
At 08:32 AM 3/16/01 -0500, Mike Reagan wrote:
Thank you Mr. Lomax,
For you input so eloquently expressed. I would have eliminated the parts
of the netlist, however it would have been counter productive to goals.
Ultimately, of course, one would have to load the entire net list. But that
At 05:51 PM 3/16/01 -0500, Mike Reagan wrote:
[I had written:]
I don't call those medium to large designs, I call them very large
designs.
The largest design I've ever encountered in my entire career -- so far --
was 8000 pins. Pins, not nets. I didn't do it -- impossible with Tango --
I don't call those medium to large designs, I call them very large
designs.
The largest design I've ever encountered in my entire career -- so far --
was 8000 pins. Pins, not nets. I didn't do it -- impossible with Tango --
but I vaguely recall that some company did the job for about