Re: [PEDA] Question about track placement
Use the select connected copper process to select the whole track. Then do a global edit, with selection = same to change all selected tracks to the net required. -Original Message- From: Anand Kulkarni [mailto:[EMAIL PROTECTED]] Sent: Friday, 27 September 2002 11:26 To: PROTEL USER Group Subject: [PEDA] Question about track placement Hi everybody, I have a question about the tracks in PROTEL. Suppose I have a track that runs in a zig-zag manner and is quite long. Now what do I do to assign this track to a net? When I click on the track only a segment is selected. And then in the properties of that track segment I can assign a net to it. But then do I have to do this for each and every segment of that long track. I think there is a better way of doing what I want to do. I'd greatly appreciate any suggestions, please do reply, thanks and regards, Anand Kulkarni Tired of all the SPAM in your inbox? Switch to LYCOS MAIL PLUS http://www.mail.lycos.com/brandPage.shtml?pageId=plus * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Question about track placement
First deselect everything: Use the keys X A Then, select all of the zigzag trace. One way is to chose Edit-Select-ConnectedCopper.( E S P ) and click on one section of it. The whole thing will turn white. Once it is all selected, edit one segment, assign the net name, click Global, and under Attributes To Match By change the Selection to Same and press OK That's it. -Original Message- From: Anand Kulkarni [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 26, 2002 6:26 PM To: PROTEL USER Group Subject: [PEDA] Question about track placement Hi everybody, I have a question about the tracks in PROTEL. Suppose I have a track that runs in a zig-zag manner and is quite long. Now what do I do to assign this track to a net? When I click on the track only a segment is selected. And then in the properties of that track segment I can assign a net to it. But then do I have to do this for each and every segment of that long track. I think there is a better way of doing what I want to do. I'd greatly appreciate any suggestions, please do reply, thanks and regards, Anand Kulkarni Tired of all the SPAM in your inbox? Switch to LYCOS MAIL PLUS http://www.mail.lycos.com/brandPage.shtml?pageId=plus * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Question about track placement
nah it's easier i think assuming it lands on a pad or something w/ the right net just do as below then cut it (with a good ref point) and paste it back the whole thing will acquire the net of the pad it lands on or paste on something w/ the right net to pick the net up and then move selection out into the air if you want Dennis Saputelli Tony Karavidas wrote: First deselect everything: Use the keys X A Then, select all of the zigzag trace. One way is to chose Edit-Select-ConnectedCopper.( E S P ) and click on one section of it. The whole thing will turn white. Once it is all selected, edit one segment, assign the net name, click Global, and under Attributes To Match By change the Selection to Same and press OK That's it. -Original Message- From: Anand Kulkarni [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 26, 2002 6:26 PM To: PROTEL USER Group Subject: [PEDA] Question about track placement Hi everybody, I have a question about the tracks in PROTEL. Suppose I have a track that runs in a zig-zag manner and is quite long. Now what do I do to assign this track to a net? When I click on the track only a segment is selected. And then in the properties of that track segment I can assign a net to it. But then do I have to do this for each and every segment of that long track. I think there is a better way of doing what I want to do. I'd greatly appreciate any suggestions, please do reply, thanks and regards, Anand Kulkarni Tired of all the SPAM in your inbox? Switch to LYCOS MAIL PLUS http://www.mail.lycos.com/brandPage.shtml?pageId=plus -- ___ www.integratedcontrolsinc.comIntegrated Controls, Inc. tel: 415-647-04802851 21st Street fax: 415-647-3003San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Question about track placement
That will really confuse 'em. :) -Original Message- From: Dennis Saputelli [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 26, 2002 7:05 PM To: Protel EDA Forum Subject: Re: [PEDA] Question about track placement nah it's easier i think assuming it lands on a pad or something w/ the right net just do as below then cut it (with a good ref point) and paste it back the whole thing will acquire the net of the pad it lands on or paste on something w/ the right net to pick the net up and then move selection out into the air if you want Dennis Saputelli Tony Karavidas wrote: First deselect everything: Use the keys X A Then, select all of the zigzag trace. One way is to chose Edit-Select-ConnectedCopper.( E S P ) and click on one section of it. The whole thing will turn white. Once it is all selected, edit one segment, assign the net name, click Global, and under Attributes To Match By change the Selection to Same and press OK That's it. -Original Message- From: Anand Kulkarni [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 26, 2002 6:26 PM To: PROTEL USER Group Subject: [PEDA] Question about track placement Hi everybody, I have a question about the tracks in PROTEL. Suppose I have a track that runs in a zig-zag manner and is quite long. Now what do I do to assign this track to a net? When I click on the track only a segment is selected. And then in the properties of that track segment I can assign a net to it. But then do I have to do this for each and every segment of that long track. I think there is a better way of doing what I want to do. I'd greatly appreciate any suggestions, please do reply, thanks and regards, Anand Kulkarni Tired of all the SPAM in your inbox? Switch to LYCOS MAIL PLUS http://www.mail.lycos.com/brandPage.shtml?pageId=plus -- __ _ www.integratedcontrolsinc.comIntegrated Controls, Inc. tel: 415-647-04802851 21st Street fax: 415-647-3003San Francisco, CA 94110 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *