At 02/06/2003 10:19, I wrote:
Hi folks,
leave it to Leo to crash into weird stuff: the PCB editor refuses to
rotate components when I press the spacebar.
snippety-snip
I am convinced I messed something up, but what?
To somewhat answer my own question: I renamed the AdvPCB99SE.INI and
restarted
At 02/06/2003 11:00, Mattias wrote:
I believe that the component drag setting may influence this behavior too
if I remember correctly. Try to change that setting under preferences.
BINGO. That was the culprit. Thanks!
Leo Potjewijd
hardware designer
IE Keyprocessor bv.
[EMAIL PROTECTED]
+31 20
They are, and they aren't
They are, because a whole lot of inexplicable problems beyond the standard
plethora of inexplicable problems with Protel EDA can be traced
right back to the often inexplicable and all too common corruption of the
file(s)
They aren't because they are often corrupted and
Hi Leo,
There is a setting for how many degrees objects should rotate for every
time you press the space bar. Check if it is correctly defined (like 90
deg) under ToolsPreferencesRotation Step. Setting this to 0 deg would
cause the problem you are seeing.
I believe that the component drag
On 06:19 PM 2/06/2003, Leo Potjewijd said:
Hi folks,
leave it to Leo to crash into weird stuff: the PCB editor refuses to
rotate components when I press the spacebar.
What happened: last wednesday I was happily working on a complex design
and all I had to do was annotate (auto-annotate makes a