Thanks Slau! I will go now and do it over, making sure I'm in the Edit
window. God bless! Have a wonderful rest of the weekend!
Best,
Dammie
On 6/1/19, Slau Halatyn wrote:
> 1. Make sure you're in the Edit window.
> 2. Get the insertion cursor to where you want the fade to start.
> 3. Control
1. Make sure you're in the Edit window.
2. Get the insertion cursor to where you want the fade to start.
3. Control D to fade to start or Control G to fade to end.
HTH,
Slau
> On Jun 1, 2019, at 4:52 PM, Dammie Onafeko wrote:
>
> Hi guys:
> A great afternoon to you all. I'm trying to fade in
Hi guys:
A great afternoon to you all. I'm trying to fade in and out, but each
time I make my selection and do Control D or G, nothing seems to
happen. Am I doing something wrong or what's the matter? I'll greatly
appreciate your assistance in figuring out what the matter is and
making headway in
Make sure the end of your tracks are continuous and not separated anywhere
between where you wish to start the fade and the end. Consolidate clips if
needed. Then, select the tracks with Shift Command P or semicolon. Move your
insertion to the start of the intended fade, then Control G to
First, I don't have a control surface; please don't shoot me with a gun.
I am trying to lay down some vocals over a karaoke track which I own.
The short version of the story is, the karaoke track ends very abruptly,
and very coldly. Trust me when I say, it sounds absolutely God Aweful!
Thanks so much for that.
much appreciated.
> On May 30, 2018, at 7:09 PM, Slau Halatyn wrote:
>
> Hi Ramy,
> The fade shapes only apply to clip-based fades. with Masters, aux inputs,
> tracks, etc., automation has no fixed shape, you do it either with Voiceover
> or with a control surface as
Hi Ramy,
The fade shapes only apply to clip-based fades. with Masters, aux inputs,
tracks, etc., automation has no fixed shape, you do it either with Voiceover or
with a control surface as Steve pointed out. Otherwise, as previously stated,
you bounce the mix and apply a fade to the clip and
Hi Slau:
I did the 2nd solution.
but my question here is that, how ican select the legnier fade that it was
selected before?
i changed the fade out type.
how can i select the original 1?
> On May 29, 2018, at 8:58 PM, Slau Halatyn wrote:
>
> It's standard practice to create a mix of a song and
This is very great idea
but just for my information, will i leave the effects on the master track
available? or i must by-pass them when using my mastered fade track?
> On May 29, 2018, at 6:34 PM, John André Lium-Netland
> wrote:
>
> Hi,
>
> You might use automation on the master fader to
It's standard practice to create a mix of a song and handle any fade out on the
mixed file, either by importing it into the same session and soloing it or into
a mastering session . Otherwise, you can automate a master fader.
> On May 29, 2018, at 12:21 PM, Ramy Moustafa wrote:
>
> And sorry
Hi,
You might use automation on the master fader to create a fade before you bounce
the mix to disk, or you might bounce the mix to disk and select the checkbox in
that dialog that import the mix to a new audio track in Pro Tools. Then you
both have a mix without a fade saved on your drive,
And sorry again, i’m trying now to select all my audio tracks,
when i hit CMd-f, i got the fade out dialogue, i selected the fade out shpae,
interact with it, choose the fade presets, and choose another thing that of
cores the voice over will not say something. is there an easier way of
SO u mean that i must fade all my wave tracks to the end?
> On May 29, 2018, at 6:13 PM, Slau Halatyn wrote:
>
> Hi Ramy,
> The fade dialog only works on waveforms so that process doesn't apply to a
> master track. The only way to fade a master track is to use automation.
> HTH,
> Slau
>
>>
Hi Ramy,
The fade dialog only works on waveforms so that process doesn't apply to a
master track. The only way to fade a master track is to use automation.
HTH,
Slau
> On May 29, 2018, at 12:00 PM, Ramy Moustafa wrote:
>
> Hi all:
>
> the is the first time for me to make a fade out song on
Hi all:
the is the first time for me to make a fade out song on protools.
I have the Protools with speech saying that just put the start and end fade
markers and press CMD-F.
i selected my master track, and i di dthat but with no luck.
all i did is that:
i made my selection.
i selected my master
OK. Thanks for the help.
Chris.
- Original Message -
From: "Slau Halatyn" <slauhala...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Thursday, December 15, 2016 9:46 AM
Subject: Re: fading regions
Selections of clips need to be done from one boundary to ano
la...@gmail.com>
> To: <ptaccess@googlegroups.com>
> Sent: Thursday, December 15, 2016 12:17 AM
> Subject: Re: fading regions
>
>
> Tab moves the insertion point to the next clip boundary. Option+Tab moves the
> insertion point to the previous clip boundary. Add Shift
;
To: <ptaccess@googlegroups.com>
Sent: Thursday, December 15, 2016 12:17 AM
Subject: Re: fading regions
Tab moves the insertion point to the next clip boundary. Option+Tab moves
the insertion point to the previous clip boundary. Add Shift to make
selections.
Slau
On Dec 14, 2016, at 7:00 PM, Ch
.
- Original Message -
From: "Slau Halatyn" <slauhala...@gmail.com>
To: <ptaccess@googlegroups.com>
Sent: Wednesday, December 14, 2016 6:45 PM
Subject: Re: fading regions
Use Control instead and make sure the Edit window is open.
Slau
On Dec 14, 2016, at 5:3
beautiful thanks Slau.thought i tried that but obviously not, as it works fine
now.
Thanks again.
Steve
> On 15 Dec 2016, at 9:45 AM, Slau Halatyn wrote:
>
> Use Control instead and make sure the Edit window is open.
> Slau
>
>> On Dec 14, 2016, at 5:33 PM, Steve
Use Control instead and make sure the Edit window is open.
Slau
> On Dec 14, 2016, at 5:33 PM, Steve Sparrow wrote:
>
> Hey guys, since updating to p t 12 i can’t seem to fade to the start or end
> of regions with option d or option g. I’m pretty sure i’ve got the
Hey guys, since updating to p t 12 i can’t seem to fade to the start or end of
regions with option d or option g. I’m pretty sure i’ve got the correct
commands. If so is there a new command for doing this.
Steve
--
You received this message because you are subscribed to the Google Groups "Pro
Thanks.
I will definitely give that a try.
Chris.
- Original Message -
From: Slau Halatyn
To: ptaccess@googlegroups.com
Sent: Thursday, November 26, 2015 1:49 AM
Subject: Re: Fading out audio
Chris,
You need to select from anywhere other than the very beginning
with the wrong one, but I hit
> the toggle preset button, and then definitely see the librarian menu, and all
> the other parameters. NO matter which shape though I pick for the fade, it's
> not working.
>
> Basically, I'm just trying to get those oos to fade down witho
Hey Nick, was your school satisfied with your work on that song?
- Original Message -
From: Nick Gawronski
To: ptaccess@googlegroups.com
Sent: Wednesday, April 16, 2014 4:03 PM
Subject: Re: Fading
Hi, I was the student that was talked about in this message and I did
OK, yesterday, I was training a client on the use of ProTools, and we
discovered something kind of interesting that I'd like a little bit of
clarification regarding.
Basically, one of the things he had to do in his ProTools college corse, was to
take an mp3 file, import it into PT as an audio
Hi Chris,
There could be any number of reasons why it's not working for you. I couldn't
even begin to really troubleshoot it. Suffice it to say, however, that the
default fade-out, unless you changed it somewhere, is the equal power fade. So,
you don't even have to open the fades dialog.
Yes Slau,
That worked. I have no idea then why the dialog didn't do it. that's totally
bizarre!
Chris.
- Original Message -
From: Slau Halatyn
To: ptaccess@googlegroups.com
Sent: Tuesday, April 15, 2014 2:54 PM
Subject: Re: Fading
Hi Chris,
There could be any
I didn't know about option+G either, but it definitely did do the trick.
Chris.
- Original Message -
From: Nick Gawronski
To: ptaccess@googlegroups.com
Sent: Tuesday, April 15, 2014 5:16 PM
Subject: Re: Fading
Hi, I was the student that was talked about in this message
29 matches
Mail list logo