Hi David,
This message did go through to the list. Composing a new message with a new
subject addressed to the ptaccess@googlegroups.com works fine.
I don't know what's going on for you. If you have insertion set to follow scrub
(which I think you already have set), adding the Shift modifier
Hello Slau, I got the jog wheel working but when I press the shift key to
select the audio or midi I want to delete or change I can’t get the shift key
to work. I elected the track I wanted to edit I have flotools installed. What
am I missing?
I tried to post this on the protools accessibility
I did check that, also I found that in my controller I had to program the
button to do the jog wheel it was on some other function so I fix that and when
I did that everything is as far as that part works now I just have to remember
how to do all the editing because I haven’t done for so many
Ah, one thing did just come to mind. If you haven't done this already, make
sure that in the Pro Tools Preferences, under the Operation tab, you check the
checkbox for "Insertion Follows Scrub." If you haven't done that, that's the
culprit. LMK
Slau
> On Apr 20, 2020, at 7:05 PM, David Dobler
Hi David,
Oo, I have no idea where that button is, of course. Now, it's possible that
there was some slight change between the 3500 and the 3800 and so maybe it's
not the bottom right. At any rate, I'm wondering whether SeeingAI might do the
trick. Maybe the buttons are too close together for
I Spoke with Chris Snighter yesterday, the right hand most lower button is what
he said to press, but for some reason it does not respond is there something
I’’m missing. Thanks so much.
> On Apr 20, 2020, at 2:04 PM, Slau Halatyn wrote:
>
> Hi David,
>
> I did a quick Google search and
Hi David,
It's been about 17 years since I've been in front of a 3800 but, if I remember
correctly, there's a scrub button that needs to be pressed to get the surface
into scrub mode. If the device is recognized and the faders pop up when you
open a session, I'm pretty sure it's just a matter
Hello I use PT 2019.6 And have a JL Cooper MCS 3800 How do I get the jog
wheel to work PS Do I need to down grade or What? Thanks so much
--
You received this message because you are subscribed to the Google Groups "Pro
Tools Accessibility" group.
To unsubscribe from this group and stop