Ok, but must i set it in the Focus right Software or what? because it is not
accessible at all,
> On Dec 8, 2019, at 1:48 PM, TheOreoMonster wrote:
>
> If memory serves correct I believe the second headphone jack can be made to
> take the signal of one of th output pairs on the back. For exa
If memory serves correct I believe the second headphone jack can be made to
take the signal of one of th output pairs on the back. For example 7/8 or
9/10, if you have that option enable in Focusrite Control, You can just set the
headphone bus to output to that pair of outputs and then the seco
Hi:Now am using the headphone kac on the back, because i failed using the front
ones, can not seprate them at all.
> On Dec 6, 2019, at 4:34 AM, TheOreoMonster wrote:
>
> Are you using a headphone amp plugged into one of the outputs on the back, or
> are you trying to use the second headphone
Are you using a headphone amp plugged into one of the outputs on the back, or
are you trying to use the second headphone jack on the unit for this?
> On Dec 5, 2019, at 4:01 PM, Ramy Moustafa Saber رامي مصطفى صابر
> <ramy.moustaf...@gmail.com> wrote:
>
> Hi all:
>
> I bought my Clarett 8
Hi all:
I bought my Clarett 8 Prex from more than 7 month, and i use it with happiness,
the only thing that i can not configure, is that how can i differenciate the
outputs, i need to send all my Protools session to main1 and 2, but my
headphone OX to another out etc, can anyone that has this c
