aha i see. thanks so much
> On Nov 23, 2018, at 4:21 PM, CHUCK REICHEL
> wrote:
>
> Hi
> strip silence is Basically "destructive".
> Noise gate is only as long as you have the gate plugin inserted on your audio
> track.
> HTH
> Chuck
>
> On Nov 22, 2018, at 6:12 PM, Ramy Moustafa wrote:
>
On 11/23/18, Steve Sparrow wrote:
> What area of mixing are you stuck at. can you outline what you want to do,
> and what you are having trouble achieving.Then we would more than likely be
> able to assist.
> Steve
>
> Steve
>
>
>> On 24 Nov 2018, at 6:45 am, Dammie Onafeko
>> wrote:
>>
>> Hi
What area of mixing are you stuck at. can you outline what you want to do, and
what you are having trouble achieving.Then we would more than likely be able to
assist.
Steve
Steve
> On 24 Nov 2018, at 6:45 am, Dammie Onafeko wrote:
>
> Hi guys:
>
> Happy holidays to you all! I'm trying to
Hi guys:
Happy holidays to you all! I'm trying to mix in protools, but I'm
having difficulties doing that. I imported the the bed I want to use
and the pieces of vocals to mix with the bed so as to produce a spot.
I've been stuck since yesterday, anyone have an idea of how to go
about doing this
Hi
strip silence is Basically "destructive".
Noise gate is only as long as you have the gate plugin inserted on your audio
track.
HTH
Chuck
On Nov 22, 2018, at 6:12 PM, Ramy Moustafa wrote:
> Hi Chuck:
> Thansk so much for this.
> but may i know the difference between Noise gate and strep
Hi Chuck:
Thansk so much for this.
but may i know the difference between Noise gate and strep Silence?
THanks
> On Nov 22, 2018, at 4:27 AM, CHUCK REICHEL
> wrote:
>
> Hi Ramy,
>
> First thing to try is a noise gate and just set the threshold so only the
> usable vocal can be heard.
> next
Hi Peet:
THanks so much for that, they are all working.
Just the Numeric Keypad is dimmed. do not know why. but it’s working as you
stated.
THanks again
> On Nov 22, 2018, at 4:40 PM, peter bosher wrote:
>
> Hi Ramy,
>
>
> Two things which might help you:
>
> In ProTools preferences,
Hi Ramy,
Two things which might help you:
In ProTools preferences, operation tab, transport cluster, check the
checkbox "audio during fast-forward/rewind", set the "custom FF/RW
speed" to your preference but I find around 500 % is good. then make
sure that the numeric keypad mode is set to
Hi Ramy,
First thing to try is a noise gate and just set the threshold so only the
usable vocal can be heard.
next You can use strip silence on the vocal track and just set the threshold
below any usable vocal information on the track.
If you set it properly you'll only have the vocal track
Ok, but again i must listen to the hole track in this way, right?
there is no way to know where the singer is singing, he can sing just 1 or 2
words,
and then silence for 4 or 5 bars. etc
so the tap will not work.
> On Nov 21, 2018, at 8:15 PM, Steve Martin wrote:
>
> Yeah, use tab to move
Yeah, use tab to move to where the singing starts then when you find where you
want to edit use CMD+E to split the wave file there.
> On Nov 21, 2018, at 12:30 PM, Ramy Moustafa wrote:
>
> Ok, but i have the track as 1 wave file, because he needs me to open
> Recording and leave him sing
Ok, but i have the track as 1 wave file, because he needs me to open Recording
and leave him sing whenever he needs.
do you mean Using the Cmd+E after i listen him Singing? or what?
> On Nov 21, 2018, at 3:55 PM, Steve Martin wrote:
>
> Tab to transient may be useful here. Every time you are
Tab to transient may be useful here. Every time you are at the start of where
its blank for a while if you tab to the next transient it should place you
where he starts singing again and if needed you can rewind a little to place
the split.
> On Nov 21, 2018, at 8:17 AM, Ramy Moustafa wrote:
Hi:
Am using Kepad of cores, but pressing 1 and 2 move me between bars but i can
not listen while Moving between them.
I have my Fader port 8, also, presssing the Fast forward keys did not make me
listen.
any ideas?
> On Nov 21, 2018, at 2:10 PM, 'Stefan Albertshauser' via Pro Tools
>
Hi,
If you’re using the numeric key pad, fast foreward is possible. If you have a
control surface with jog wheel, the scrubbing function definitely is your
friend.
Hope, that helps.
Stefan
> Am 21.11.2018 um 12:54 schrieb Ramy Moustafa :
>
> Hi all:
>
> Need to know if there is a better
15 matches
Mail list logo
