On Thu, May 5, 2011 at 6:59 AM, Nan Liu wrote:
> On Wed, May 4, 2011 at 12:51 PM, rjl wrote:
> > Hi all,
> > Presently, I am managing my external data via CSV files. These files
> > are manually changed as required.
>
> Are you using extlookup function to retrieve the CSV configuration data?
>
>
Hi all,
I'm trying to figure out how to automatically configure my nodes with
amanda backup client.
What I want to achieve is that the server have an entry created in the
/etc/amanda/(Daily|Weekly|Monthly)/disklist.conf file on the server.
The disklist.conf file lists entries like so:
nod
> We work around it by checking the existence of the fact/value before using it
Is this done in the template file or somewhere else? Can you please
supply dummy code as an example?
Thanks
On May 5, 12:01 am, Disconnect wrote:
> Although good advice (pluginsync is win) that still doesn't solve
On Wed, May 4, 2011 at 12:51 PM, rjl wrote:
> Hi all,
> Presently, I am managing my external data via CSV files. These files
> are manually changed as required.
Are you using extlookup function to retrieve the CSV configuration data?
> I would like to have a UI that updates a database (probably
On Wed, May 4, 2011 at 12:24 PM, takrishnan wrote:
> Can I use the define directly within a node specification?
> For example:
>
> node abc {
> include sudoers::config {"group1":}
> }
Defines result in a custom resource type, and the sytax is the same as
any other puppet resource:
type { 'ti
It's not ideal but this could very easily be achieved by with Zabbix.
With Zabbix you can have a check, running for example every 30
seconds, that runs a checksum on a specific file. Then a trigger that
is activated if the last known checksum varies from the current
checksum, here's an example fro
It sounds like you are solving the wrong problem.
Why do your users have root privs?
If they need root for some things, use sudo to give them
only what they need. Or use suid/sgid mechanisms
to allow community access to certain resources.
If you need to lock down specific files look at the
immut
I am writing a hp ilo module to automatically assign a static ip that is
derived from the IP of the system which is fed in via facter. I basically just
need to change the network the ilo is connected to.
The ruby code works great inside the irb console. However, puppet doesn't seem
to be able
Hi,
I haven't tested puppet/passenger with those versions of passenger/rake but
they appear high to me.
I use 2.1x of passenger and 1.1 of rake (cant remember exact versions). Higher
versions did not work.
This may or may not be your particular issue as I currently run 2.6.4 of puppet.
Cheers
Alessandro Franceschi wrote:
> Thank you for the feedback.
> I've momentarily postponed the inventory setup but, for the chronicle,
> just inserting the query you posted didn't work out of the box.
> I'll get back on this when sorted out other things.
> Al
>
Al
You should also be able to do:
[ma
Turned out the problem was multiple ruby versions. I tried to install
Rails 3, which in turn tried to install Activerecord 3, which required
ruby 1.8.7 which I installed. I cleaned up ruby-1.8.7, installed Rails
2.3.4 and its associated components, and now this works.
On Apr 29, 9:11 pm, George w
I have been through all of the instructions for setting up a
PuppetMaster using Passenger. At the present time, when I access
Passenger I receive the Passenger Error page with the message "The
application has exited during startup (i.e. during the evaluation of
config/environment.rb)". I've looke
In my puppet-dashboard when a change is made to files and it shows the
MD5 sums I am never presented a link to view the file or any diffs of
those files. I assume that the text between '[' and ']' is supposed
to be the link but it's just plain text. This is when viewing
individual reports in Pupp
Hi all,
Presently, I am managing my external data via CSV files. These files
are manually changed as required.
I would like to have a UI that updates a database (probably postgres)
and then have puppet retrieve its external data directly from the
database.
Has anyone done this? Does this make sen
Thanks Nan!
Can I use the define directly within a node specification?
For example:
node abc {
include sudoers::config {"group1":}
}
node xyz inherits abc {
include sudoers::config {"group2":}
}
Anandha
On Apr 29, 10:04 am, Nan Liu wrote:
> On Fri, Apr 29, 2011 at 9:53 AM, takrishn
On Wed, May 4, 2011 at 8:01 AM, Felix Frank wrote:
> > Can I somehow pass variables or other tokens around the catalogue and
> > make conditional decisions in other modules based on them?
>
> Excellent question.
>
> You more or less can, but you shouldn't. Scoping issues will bite you
> sooner or
> Sent: 04 May 2011 16:07
> To: Puppet Users
> Subject: [Puppet Users] Re: templates on puppetmaster,
> shipped via scp to clients
>
> Thanks Russell and Felix! That makes plenty of sense - the
> puppet client can do all the manifest and template processing
> that puppetmaster can do, plus it
Thanks Russell and Felix! That makes plenty of sense - the puppet
client can do all the manifest and template processing that
puppetmaster can do, plus it has access to facter facts.
On May 4, 6:31 am, Russell Howe wrote:
> > Subject: [Puppet Users] templates on puppetmaster, shipped
> > via scp
On Wed, May 4, 2011 at 2:39 PM, Jake - USPS wrote:
> I responded to this last night but don't see my reply still this
> morning so I'm going to respond again.
>
For some reason Google Groups thought your message was spam. I just sent it
through.
> I had a question about if the CA and CRL being
Hi,
I don't know if I'm just not getting it, but I'm struggling to find
"the" way to elegantly disable a class in its entirety. I am aware of
the foo::disabled conventions, but these are about the disabling of
the end service defined by the class, not the class itself. I'm
looking to have an most
So does that mean those will be update as well (if ca_ttl is set
before they are generated) or are they 5y regardless and using
anything higher then 5y does not matter? Or are you just throwing a
fact out there and it doesn't matter to me and I'll be OK?
Thanks,
Jake
On May 3, 3:30 pm, Ohad Lev
I responded to this last night but don't see my reply still this
morning so I'm going to respond again.
I had a question about if the CA and CRL being signed for 5 years is
static or also controlled by ca_ttl. If they are 5y regardless/
static, is there some sort of action I need to take when the
On May 3, 2011, at 11:37 AM, Edd Grant wrote:
> Hi Martin,
>
> Have tried this out and have noticed that the copied .gz file is left
> in /usr/share/java after unpacking. I tried adding another file
> resource to delete it but because this points to the same filepath as
> the initial resource pu
On Wed, May 4, 2011 at 10:01 AM, Disconnect wrote:
> Although good advice (pluginsync is win) that still doesn't solve the
> chicken/egg problem - puppet won't evaluate the new facts on the first run.
Pluginsync should occur before facter executes and facts get submitted
to the server, so it shou
Although good advice (pluginsync is win) that still doesn't solve the
chicken/egg problem - puppet won't evaluate the new facts on the first run.
We work around it by checking the existence of the fact/value before using
it. Not ideal but it works. (And on brand new hosts, we run puppetd -t
--tags
Thank you, it solved!
Goodbye,
Matteo
2011/5/4 Ohad Levy
>
>
> On Wed, May 4, 2011 at 2:09 PM, M C wrote:
>
>> Hi,
>>
>> I have this problem: when I make a new request and sign the client's
>> certificate, then i get a "revoked certificate" error:
>>
>> err: Could not retrieve catalog from rem
Hi,
as suggested on the list I switched from the standalone puppetmaster to
Passenger. I have passenger installed now and edited the apache config as far as
I understood. I restarted apache.
Now when I run an agent I get:
/var/lib/gems/1.8/bin/puppet agent --server node002 --test
err: Could n
On Wed, May 4, 2011 at 2:09 PM, M C wrote:
> Hi,
>
> I have this problem: when I make a new request and sign the client's
> certificate, then i get a "revoked certificate" error:
>
> err: Could not retrieve catalog from remote server: sslv3 alert certificate
> revoked
>
> I am using same version
Hi,
I have this problem: when I make a new request and sign the client's
certificate, then i get a "revoked certificate" error:
err: Could not retrieve catalog from remote server: sslv3 alert certificate
revoked
I am using same version of puppet on master and clients, tried many times,
dates are
> On 05/03/2011 08:37 PM, Edd Grant wrote:
> > Hi Martin,
> >
> > Have tried this out and have noticed that the copied .gz
> file is left in /usr/share/java after unpacking.
Is this so bad? I would probably do something like:
$tarball_dir = "/usr/local/src"
$maven_version = "1.2.3"
file { "$t
> Subject: [Puppet Users] templates on puppetmaster, shipped
> via scp to clients
>
> Hi folks,
>
> I can't run puppet client on my nodes. I want to fake facter
> info to process templates and ship them via scp to my nodes.
> Is it possible?
> Strategies?
I think puppet just uses the erb pr
On 05/03/2011 09:50 PM, Judd Maltin wrote:
> Hi folks,
>
> I can't run puppet client on my nodes. I want to fake facter info to
> process templates and ship them via scp to my nodes. Is it possible?
> Strategies?
>
> This work will be utilized later in a proper Puppet setup, as the
> ports will
> Can I somehow pass variables or other tokens around the catalogue and
> make conditional decisions in other modules based on them?
Excellent question.
You more or less can, but you shouldn't. Scoping issues will bite you
sooner or later.
For your use case, you should take a hard look at Custom
33 matches
Mail list logo