> diff --git a/PVE/VZDump.pm b/PVE/VZDump.pm
> index 1e00c2d..302da0c 100644
> --- a/PVE/VZDump.pm
> +++ b/PVE/VZDump.pm
> @@ -853,6 +853,10 @@ sub exec_backup_task {
> # lock VM (prevent config changes)
> $plugin->lock_vm ($vmid);
>
> + my $conf = PVE::QemuConfig->load_config($vm
---
pve-zsync | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/pve-zsync b/pve-zsync
index ff9ee8f..4491d1a 100644
--- a/pve-zsync
+++ b/pve-zsync
@@ -114,9 +114,9 @@ sub check_pool_exists {
};
if ($@) {
- return 1;
+ return 0;
}
-return unde
---
pve-zsync | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/pve-zsync b/pve-zsync
index 4491d1a..b0d5e30 100644
--- a/pve-zsync
+++ b/pve-zsync
@@ -474,11 +474,11 @@ sub init {
run_cmd(['ssh-copy-id', '-i', '/root/.ssh/id_rsa.pub', "root\@$ip"]);
}
-
---
PVE/VZDump.pm | 4
1 file changed, 4 insertions(+)
diff --git a/PVE/VZDump.pm b/PVE/VZDump.pm
index 1e00c2d..302da0c 100644
--- a/PVE/VZDump.pm
+++ b/PVE/VZDump.pm
@@ -853,6 +853,10 @@ sub exec_backup_task {
# lock VM (prevent config changes)
$plugin->lock_vm ($vmid);
+
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
changelog :
- cleanup typos
- pre_dellocate_hugepages on memoryhotplug
vm configuration
hugepages: (any|2|1024)
any: we'll try to allocate 1GB hugepage if possible, if not we use 2MB hugepage
2: we want to use 2MB hugepage
1024: we want to use 1GB hugepage. (memory need to be m
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
Rename to 'start failure policy' as else it may be confused with
recovery after fencing, also derscribe its intend.
Signed-off-by: Thomas Lamprecht
---
Yes, much better title for what it is, thanks!
changes since v1:
* s/Start Recovery Policy/Start Failure Policy/
* small rewording
ha-manager
> -Recovery Policy
>
> -
> -There are two service recover policy settings which can be configured
> +Start Recovery Policy
> +-
or maybe "Start Failure Policy"?
___
pve-devel mailing list
pve-devel@pve.proxmox.com
Describe how and why nodes get selected on a recovery of a fenced
service
Signed-off-by: Thomas Lamprecht
---
ha-manager.adoc | 18 ++
1 file changed, 18 insertions(+)
diff --git a/ha-manager.adoc b/ha-manager.adoc
index 6c19ffc..0071b98 100644
--- a/ha-manager.adoc
+++ b/ha-man
Explain that nodes in groups may have priorities and fix also some
spelling and clarifications.
Signed-off-by: Thomas Lamprecht
---
ha-manager.adoc | 20 ++--
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/ha-manager.adoc b/ha-manager.adoc
index 78bbf10..2cad06c 1
Rename to 'start recovery policy' as else it may be confused with
recovery after fencing, also derscribe its intend.
Signed-off-by: Thomas Lamprecht
---
ha-manager.adoc | 17 +
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/ha-manager.adoc b/ha-manager.adoc
index
Looks good so far. One missing cleanup call and some typos marked
inline.
On Fri, Jun 10, 2016 at 12:37:45PM +0200, Alexandre Derumier wrote:
> changelog :
> - rebase on last git
> - check if numa hostnodes is defined when hugepages is enabled
>when using manual numa nodes definition
> - fi
> On June 14, 2016 at 8:14 AM Wolfgang Link wrote:
>
>
> ---
> PVE/VZDump.pm | 11 +++
> 1 file changed, 11 insertions(+)
>
> diff --git a/PVE/VZDump.pm b/PVE/VZDump.pm
> index 1e00c2d..0280568 100644
> --- a/PVE/VZDump.pm
> +++ b/PVE/VZDump.pm
> @@ -853,6 +853,17 @@ sub exec_backup_
applied both patches
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
The commit message looks strange (source source?)
> On June 14, 2016 at 11:30 AM Wolfgang Link wrote:
>
>
> ---
> pve-zsync | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/pve-zsync b/pve-zsync
> index ff9ee8f..b0abf3c 100644
> --- a/pve-zsync
> +++ b/pve-zsync
> @@ -
---
Makefile | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 46312e0..e783751 100644
--- a/Makefile
+++ b/Makefile
@@ -96,7 +96,7 @@ ${PVE_DEB} pve: proxmox-ve/control proxmox-ve/postinst
sed -e 's/@KVNAME@/${KVNAME}/' proxmox-ve/data/DEB
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
Since the Admin Guide is now delivered with each standard
PVE installation, link it from the support tab
Initial idea was to include the chapters list in the panel itself
but a simple link renders better because:
* linking to toplevel allows to show that pdf and epub are also
available
* the chapt
---
www/manager6/qemu/MemoryEdit.js| 1 +
www/manager6/qemu/NetworkEdit.js | 1 +
www/manager6/qemu/ProcessorEdit.js | 1 +
3 files changed, 3 insertions(+)
diff --git a/www/manager6/qemu/MemoryEdit.js b/www/manager6/qemu/MemoryEdit.js
index 1bddeb9..7b57959 100644
--- a/www/manager6/qemu/M
"ceph version" retrieves the version from the cluster (i.e.,
from the queried monitor), but what is needed here is the
local ceph version, which is returned by "ceph --version".
---
Note: this broke external ceph clusters with no /etc/ceph/ceph.conf
and/or lower local version than cluster version
---
pve-zsync | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pve-zsync b/pve-zsync
index ff9ee8f..b0abf3c 100644
--- a/pve-zsync
+++ b/pve-zsync
@@ -476,7 +476,7 @@ sub init {
die "Pool $dest->{all} does not exists\n" if check_pool_exists($dest);
-my $check = chec
to reduce QemuServer.pm size
also move the $device hash out of any function
Signed-off-by: Dominik Csapak
---
PVE/QemuServer.pm | 139 +
PVE/QemuServer/Makefile | 1 +
PVE/QemuServer/PCI.pm | 146 ++
this adds a function for hotplugging usb devices
Signed-off-by: Dominik Csapak
---
this function has to be in here, since i did not
refactor the monitor functions yet
PVE/QemuServer.pm | 25 +
1 file changed, 25 insertions(+)
diff --git a/PVE/QemuServer.pm b/PVE/QemuServ
this patch introduces working usb hotplugging
you can now add a usb device while a vm is running
this does not work with spice at the moment, only
with usb passthrough
Signed-off-by: Dominik Csapak
---
PVE/QemuServer.pm | 17 +
1 file changed, 17 insertions(+)
diff --git a/PVE
this moves most of the usb functionality into its own
module, making the QemuServer.pm smaller
Signed-off-by: Dominik Csapak
---
PVE/QemuServer/Makefile | 1 +
PVE/QemuServer/USB.pm | 124
2 files changed, 125 insertions(+)
create mode 100644
Signed-off-by: Dominik Csapak
---
PVE/QemuServer.pm | 83 ---
1 file changed, 6 insertions(+), 77 deletions(-)
diff --git a/PVE/QemuServer.pm b/PVE/QemuServer.pm
index 6147016..5ba46c9 100644
--- a/PVE/QemuServer.pm
+++ b/PVE/QemuServer.pm
@@ -
since usb devices do not have their own
"query" command in qmp, we have to use
qom-list /machines/peripheral
which essentially gets a list of peripheral devices of
the vm
there we only get the usb devices
Signed-off-by: Dominik Csapak
---
this will only work with usb devices after this patch se
this series does 3 things:
it refactors some functions from QemuServer.pm
in its own modules, namely the print_pci(e) functions
and the usb configuration functions, mainly to reduce
the monolithic qemuserver.pm but also to avoid cyclic use clauses
in the perl modules
then i implemented usb hotplu
there was a wrong } instead of a ]
either it worked or nobody noticed,
but this patch fixes it
Signed-off-by: Dominik Csapak
---
pve-q35.cfg | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pve-q35.cfg b/pve-q35.cfg
index f9f72fc..05f85f0 100644
--- a/pve-q35.cfg
+++ b/pve-q3
applied
___
pve-devel mailing list
pve-devel@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
Also rename Multiqueues to Multiqueue, to match upstream description
---
qm.adoc | 38 --
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/qm.adoc b/qm.adoc
index e8dc3ba..375cc39 100644
--- a/qm.adoc
+++ b/qm.adoc
@@ -169,6 +169,7 @@ when the fil
---
pve-storage-dir.adoc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pve-storage-dir.adoc b/pve-storage-dir.adoc
index f664465..088473c 100644
--- a/pve-storage-dir.adoc
+++ b/pve-storage-dir.adoc
@@ -113,7 +113,7 @@ Please use the following command to allocate a 4GB image
---
PVE/CLI/pvesm.pm | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/PVE/CLI/pvesm.pm b/PVE/CLI/pvesm.pm
index f5ae277..e3b4570 100755
--- a/PVE/CLI/pvesm.pm
+++ b/PVE/CLI/pvesm.pm
@@ -151,7 +151,7 @@ our $cmddef = {
alloc => [ "PVE::API2::Storage::Content", 'create', ['st
On Tue, Jun 14, 2016 at 09:17:10AM +0200, Wolfgang Link wrote:
> ---
> pve-storage-dir.adoc | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/pve-storage-dir.adoc b/pve-storage-dir.adoc
> index f664465..c8dbffb 100644
> --- a/pve-storage-dir.adoc
> +++ b/pve-storage-dir.ado
---
PVE/CLI/pvesm.pm | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/PVE/CLI/pvesm.pm b/PVE/CLI/pvesm.pm
index f5ae277..1a83c66 100755
--- a/PVE/CLI/pvesm.pm
+++ b/PVE/CLI/pvesm.pm
@@ -151,7 +151,7 @@ our $cmddef = {
alloc => [ "PVE::API2::Storage::Content", 'create', ['st
---
pve-storage-dir.adoc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/pve-storage-dir.adoc b/pve-storage-dir.adoc
index f664465..c8dbffb 100644
--- a/pve-storage-dir.adoc
+++ b/pve-storage-dir.adoc
@@ -113,7 +113,7 @@ Please use the following command to allocate a 4GB image
44 matches
Mail list logo