...@proxmox.com
À: aderumier aderum...@odiso.com
Cc: datanom.net m...@datanom.net, pve-devel pve-devel@pve.proxmox.com
Envoyé: Vendredi 13 Février 2015 15:44:57
Objet: Re: [pve-devel] GUI for DHCP
(I think it could be also possible to hack official qemu-guest agent).
But that mean that user need a special
09:04:55
Objet: Re: [pve-devel] GUI for DHCP
I guess this would only make sense if qemu people accept such patches
upstream.
Maybe worth to ask on the qemu list for opinions
Just found this
guest agent: add guest-exec and guest-exec-status interfaces
https://www.mail-archive.com/qemu-devel
Another more clean way, could be configure a dhcp relay on my routeur (which
are gateway for each vlan),
the forward dhcp requests to the proxmox hosts (define all proxmox hosts in
dhcp relay)
(In this case, all proxmox hosts need to be able to reply to all dhcp requests
of all vms)
But
Objet: Re: [pve-devel] GUI for DHCP
Another more clean way, could be configure a dhcp relay on my routeur (which
are gateway for each vlan),
the forward dhcp requests to the proxmox hosts (define all proxmox hosts in
dhcp relay)
(In this case, all proxmox hosts need to be able to reply
I don't known if it's technically possible to use same ip on each
host by vlan (for dhcp reponse of the vm of the hosts),
Sounds like AnyCast to me...
On Fri Feb 13 2015 at 3:16:30 AM Dietmar Maurer diet...@proxmox.com wrote:
I also seems that IPv6 SLAAC solves the problem. With RDNSS you
I also seems that IPv6 SLAAC solves the problem. With RDNSS you can get
IPv6 address, gateway, and DNS server. And this does not have any problems
with VLANs, because it is handled by the router.
I that correct?
Yes, with ipv6 it should work fine without dhcp server.
(But I need it
...@proxmox.com
Cc: pve-devel pve-devel@pve.proxmox.com
Envoyé: Vendredi 13 Février 2015 09:23:46
Objet: Re: [pve-devel] GUI for DHCP
Any idea about this ?
Sorry, no idea
Another more clean way, could be configure a dhcp relay on my routeur (which
are gateway for each vlan),
the forward dhcp
: [pve-devel] GUI for DHCP
On February 12, 2015 at 7:53 PM Alexandre DERUMIER aderum...@odiso.com
wrote:
One question I also have is:
do we install a dnsmasq on each proxmox host of a cluster ?
Yes.
I'm using a lot of vlans with /24, in a 16 proxmox nodes cluster,
that mean that I
for this speficic range 169.254.0.0/16
- Mail original -
De: dietmar diet...@proxmox.com
À: aderumier aderum...@odiso.com
Cc: datanom.net m...@datanom.net, pve-devel pve-devel@pve.proxmox.com
Envoyé: Vendredi 13 Février 2015 11:16:07
Objet: Re: [pve-devel] GUI for DHCP
I also seems that IPv6 SLAAC
(I think it could be also possible to hack official qemu-guest agent).
But that mean that user need a special proxmox qemu-guest agent.
I guess this would only make sense if qemu people accept such patches upstream.
Maybe worth to ask on the qemu list for opinions.
I don't known if it's technically possible to use same ip on each host by vlan
(for dhcp reponse of the vm of the hosts),
so no need to care (I think?) about arp on the network.
or maybe filtering arp for this ip to not going outside.
Any idea about this ?
Honestly, dhcp has do many
On February 12, 2015 at 8:23 PM Michael Rasmussen m...@datanom.net wrote:
Honestly, dhcp has do many drawbacks for me. I think we should really try
to find something better.
But so far I have no good ideas :-/
could config and leases file be storage in cluster file system so a
On Thu, 12 Feb 2015 20:37:04 +0100 (CET)
Dietmar Maurer diet...@proxmox.com wrote:
There is no need to do that if we use a static assignment?
What do you mean by static assignment?
--
Hilsen/Regards
Michael Rasmussen
Get my public GnuPG keys:
michael at rasmussen dot cc
Février 2015 14:24:04
Objet: Re: [pve-devel] GUI for DHCP
On Thu, 12 Feb 2015 14:12:29 +0100 (CET)
Alexandre DERUMIER aderum...@odiso.com wrote:
From the doc,
it's possible to listen on specific interfaces
interface=eth1
interface=eth2
or also like this
dhcp-range
On Thu, 12 Feb 2015 19:59:30 +0100 (CET)
Dietmar Maurer diet...@proxmox.com wrote:
Honestly, dhcp has do many drawbacks for me. I think we should really try
to find something better.
But so far I have no good ideas :-/
could config and leases file be storage in cluster file system so a
Attached image shows what I have in mind.
Idea is that users are able to create a DHCP service on every
configured device or bridge.
There was a long discussion about DHCP in 2013. AFAIK I sent a patch,
but I have no idea if that still works, or if someone else sent
an implementation.
So
On February 12, 2015 at 7:53 PM Alexandre DERUMIER aderum...@odiso.com
wrote:
One question I also have is:
do we install a dnsmasq on each proxmox host of a cluster ?
Yes.
I'm using a lot of vlans with /24, in a 16 proxmox nodes cluster,
that mean that I need 16 ips per vlan to
There is no need to do that if we use a static assignment?
What do you mean by static assignment?
VM 100 == IP1
VM 200 == IP2
VM XXX == IPYYY
And we make sure these mapping do not overlap in out cluster.
___
pve-devel mailing list
/msg05027.html
- Mail original -
De: dietmar diet...@proxmox.com
À: datanom.net m...@datanom.net, pve-devel pve-devel@pve.proxmox.com
Envoyé: Jeudi 12 Février 2015 11:17:04
Objet: Re: [pve-devel] GUI for DHCP
Attached image shows what I have in mind.
Idea is that users are able
On Thu, 12 Feb 2015 13:26:23 +0100 (CET)
Alexandre DERUMIER aderum...@odiso.com wrote:
So the first step would be to fínd the latest patches,
maybe theses patches: ?
[PATCH 1/2] add ip parameter to network settings
https://www.mail-archive.com/pve-devel@pve.proxmox.com/msg05026.html
Hi all,
Attached image shows what I have in mind.
Idea is that users are able to create a DHCP service on every
configured device or bridge.
I still need to sort out how to make it available on ovs-bridge. Any
ideas?
--
Hilsen/Regards
Michael Rasmussen
Get my public GnuPG keys:
michael at
-devel pve-devel@pve.proxmox.com
Envoyé: Mercredi 11 Février 2015 17:44:27
Objet: [pve-devel] GUI for DHCP
Hi all,
Attached image shows what I have in mind.
Idea is that users are able to create a DHCP service on every
configured device or bridge.
I still need to sort out how to make it available
22 matches
Mail list logo
