On January 2, 2015 at 5:37 PM Stefan Priebe - Profihost AG
s.pri...@profihost.ag wrote:
Isn't this something which was reported some weeks ago?
Sorry, but what do you refer to?
___
pve-devel mailing list
pve-devel@pve.proxmox.com
currently in ceph extra repository,
http://ceph.com/packages/ceph-extras/debian/dists/wheezy/main/binary-amd64/Packages
the libleveldb version is 1.12
vs 1.9 in proxmox repository.
Thank for that hint. I will update that with next package upload.
I get an error by numiptent 18:18 when I start this container.
Starting container ...
Container is mounted
Container start failed (try to check kernel messages, e.g. dmesg | tail)
Container is unmounted
dmesg | tail
Fatal resource shortage: numiptent, UB 294.
CT: 294: stopped
CT:
Alexandre Derumier
Ingénieur système et stockage
Fixe : 03 20 68 90 88
Fax : 03 20 68 90 81
45 Bvd du Général Leclerc 59100 Roubaix
12 rue Marivaux 75002 Paris
MonSiteEstLent.com - Blog dédié à la webperformance et la gestion de pics de
trafic
De: Cesar Peschiera
After a minute of apply on only a node (pve6), these commands, i lost the
quorum in two nodes (pve5 and pve6):
The commands executed on only a node (pve6):
echo 1 /sys/devices/virtual/net/vmbr0/bridge/multicast_snooping
echo 0 /sys/class/net/vmbr0/bridge/multicast_querier
If you enable
Am 03.01.2015 um 11:00 schrieb Dietmar Maurer:
On January 2, 2015 at 5:37 PM Stefan Priebe - Profihost AG
s.pri...@profihost.ag wrote:
Isn't this something which was reported some weeks ago?
Sorry, but what do you refer to?
Sorry i thought there were a report where block migration was
On Sat, 3 Jan 2015 21:32:54 -0300
Cesar Peschiera br...@click.com.py wrote:
Now in the switch i have igmp snooping disabled, but i want to avoid
flooding the entire VLAN and the VMs
Following rule on your pve nodes should prevent igmp packages flooding
your bridge:
iptables -t filter -A
Thanks Michael for your reply
And what about of the tag firewall in the PVE GUI:
- For the Datacenter.
- For each PVE node.
- For the network device of the VM.
In general lines, i want to have all network traffic enabled (In/Out), and
only cut the traffic that i want cut, that in this case will