Re: [PVE-User] pvecm e 1 not working anymore

On 03/18/2016 12:36 PM, Jean-Laurent Ivars wrote: > You can let go it’s ok, I revert the conf file from my other node, I > restarted the corosync service from the web interface and the folder > is back. > > As you’re saying* pvecm expected 1 *is working despite what pvecm > status says because

Re: [PVE-User] pvecm e 1 not working anymore

the forme syntax was : I don’t what is the right syntax for the corosync file :( Jean-Laurent Ivars Responsable Technique | Technical Manager 22, rue Robert - 13007 Marseille Tel: 09 84 56 64 30 - Mobile: 06.52.60.86.47 Linkedin | Viadeo

Re: [PVE-User] pvecm e 1 not working anymore

> Jean-Laurent Ivars hat am 18. März 2016 um 11:15 > geschrieben: > > > Thank you for your answer but do you know how to tell corosync.conf, quorum > with one node ? (how to put the directive expected_votes=1 ?) $ man pvecm ... pvecm expected Tells

Re: [PVE-User] pvecm e 1 not working anymore

You can let go it’s ok, I revert the conf file from my other node, I restarted the corosync service from the web interface and the folder is back. As you’re saying pvecm expected 1 is working despite what pvecm status says because both the hosts are online, I just made test (temporary

Re: [PVE-User] pvecm e 1 not working anymore

thank you for your answer :) I saw this but it doesn’t seem to work, or i dont understand how to use it correctly ? root@roubaix /etc/pve # pvecm expected 1 root@roubaix /etc/pve # pvecm status Quorum information -- Date: Fri Mar 18 11:51:14 2016 Quorum provider:

Re: [PVE-User] pvecm e 1 not working anymore

Honestly I don’t see the point of your message, you basically show the same as i did, unless the fact that you have tree servers in your cluster, my servers are hosted so i’m very sorry but I can’t pull or plug a cable… Yes in this configuration, i only have a two hosts cluster and I know it is

[PVE-User] pvecm e 1 not working anymore

Hi list, In the new cluster version (pve4) if i loose quorum (in a 2 nodes set un with one node down for example) I’m stuck. Before pve4 I could send the following command pvecm e 1 and my host was fully working again but now it seems it doesn’t work this way (the command run without error

Re: [PVE-User] pvecm e 1 not working anymore

> I saw this but it doesn’t seem to work, or i dont understand how to use it > correctly ? > Votequorum information > -- > Expected votes: 2 > Highest expected: 2 > Total votes: 2 Both nodes are online (you cannot set expected votes below actual votes).

Re: [PVE-User] pvecm e 1 not working anymore

I can answer the last part. corosync.conf => corosync/cman cluster configuration file (previous to PVE 4.x this file was called cluster.conf) On 18 March 2016 at 10:57, Jean-Laurent Ivars wrote: > Hi list, > > In the new cluster version (pve4) if i loose quorum (in a 2

Re: [PVE-User] pvecm e 1 not working anymore

> On March 18, 2016 at 12:06 PM Jean-Laurent Ivars wrote: > > > better and better ! i tried the following option : > > quorum { > provider: corosync_votequorum > expected_votes: 1 > } You really should not set such (dangerous) options unless you understand what you