Re: [PVE-User] recommendations for a single node setup

Hi, I am biased, I use zfsonlinux, I can recommend to try it. First you have to check your system with some test before you drop it into production. Cheers, István eredeti üzenet- Feladó: "Frederic Van Espen" frederic...@gmail.com Címzett: pve-user@pve.proxmox

Re: [PVE-User] Newbie question

Gilberto, I believe I have a similar setup as yours (only have 1 public IP assigned to router instance running in KVM). Make sure that your hardware node is not accessible from the public address, only the router/firewall should have the private address or you open up a security nightmare. As long

Re: [PVE-User] Newbie question

Thanks guys... I will change the configuration... As I said, "newbie question"... Thanks a lot 2014-03-06 17:04 GMT-03:00 Alain Péan : > Le 06/03/2014 19:29, Gilberto Nunes a écrit : > > I am using PVE here and host has two NIC, one for LAN and one for WAN, >> like that: >> >> eth0 - 172.172.

Re: [PVE-User] Newbie question

Le 06/03/2014 19:29, Gilberto Nunes a écrit : I am using PVE here and host has two NIC, one for LAN and one for WAN, like that: eth0 - 172.172.10.5 eth1 - 200.201.299.299 > THAT'S THE WAN CONNECTION Ok... Now I install a VM under PVE that is a Firewall... And this Firewall has two

Re: [PVE-User] Newbie question

On 2014-03-06, 12:29 PM, Gilberto Nunes wrote: Hi falks... I am using PVE here and host has two NIC, one for LAN and one for WAN, like that: eth0 - 172.172.10.5 eth1 - 200.201.299.299 > THAT'S THE WAN CONNECTION Ok... Now I install a VM under PVE that is a Firewall... And this

[PVE-User] Newbie question

Hi falks... I am using PVE here and host has two NIC, one for LAN and one for WAN, like that: eth0 - 172.172.10.5 eth1 - 200.201.299.299 > THAT'S THE WAN CONNECTION Ok... Now I install a VM under PVE that is a Firewall... And this Firewall has two nic too... Like that: eth0 - 172.

[PVE-User] recommendations for a single node setup

Hi, We are going to implement a single node setup, with storage on the local disks. All we want to achieve is a simple machine where we can add CT's or VM's when we need them. The hardware is a single HP DL360 G8 machine with SAS disks and a hardware RAID controller. Our requirements: - easily

Re: [PVE-User] Migrating a Proxmox 1.9 to 3.1

Hi, Thanks Martin and Michael for your messages. The upgrade process has been quite smooth except for some minor issues (noted for the record): - Some package config file conflicts/issues in 1.9->2.0 upgrade (npre, mdadm,...) . Fixing the problems/running apt-get install by hand and then re-