Vivek,
# new command in 1.2b5 - fabricate peptide, ALA trimer:
fab AAA
# set a dihedral value ro 180 degrees.
set_dihedral 1/C, 2/N, 2/CA, 2/C, 180
Cheers,
Warren
From: Vivek Ranjan [mailto:vran...@gmail.com]
Sent: Tue 5/5/2009 12:09 PM
To: pymol-users@lists.sourceforge.net
Subject: [PyMOL] diehedral angle
Hello,
I would like to change some of the diehedral angles in a polymer
systems. I know how to measure diehedral angle. However, I don't know
how to change it ? Any advice is greatly appreciated.
--
Thank you and Regards,
Vivek Ranjan
--
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
___
PyMOL-users mailing list
PyMOL-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/pymol-users
--
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com___
PyMOL-users mailing list
PyMOL-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/pymol-users
