In <[EMAIL PROTECTED]>, George Sakkis
wrote:
> Chris Brat wrote:
>
>> Wouldn't this only cause problems with large lists - for once off
>> scripts with small lists it doesn't seem like a big issue to me.
>
> The extra memory to allocate the new list is usually a minor issue; the
> important one i
Richard Buckle <[EMAIL PROTECTED]> writes:
> Comments, insights and overall evaluations are especially welcomed re:
> * Cleanliness of design
> * Pythonicity of design
> * Pythonicity of code
> * Efficiency of code
> * Quality of docstrings
> * Conformance with modern docstring standards
> * Confor
I recommend you Stani's Python Editor (SPE) which is available for
Windows, Linux and Mac.
http://www.stani.be/python/spe
A short tutorial about SPE can be found at:
http://www.serpia.org/spe
good luck
--
http://mail.python.org/mailman/listinfo/python-list
John Machin wrote:
> snowf wrote:
> > There are no such a method using to download a whole directory in the
> > lib of ' ftplib '.
> > thanks for anybody's help!
>
> So you'll have to lash one up:
>
> (untested)
>
> Firstly,
> alist = []
> ftpobj.retrlines('list', alist.append)
> should
hi,
i am a newbie to python but used with some developement in c++ and VB. Can
anyone suggest me a good IDE for python for developing apps...? i've seen Qt
designer.. some of my friends said it can be used for python also but they r
not sure.
pls help...
thanks in advance
--
http://mail.p
snowf wrote:
> There are no such a method using to download a whole directory in the
> lib of ' ftplib '.
> thanks for anybody's help!
So you'll have to lash one up:
(untested)
Firstly,
alist = []
ftpobj.retrlines('list', alist.append)
should get you a list of filenames.
Secondly,
[EMAIL PROTECTED] wrote:
> Okay, here we go:
> 1. Download IronPython
Kudos for taking the time!
--
http://mail.python.org/mailman/listinfo/python-list
Richard Schulman wrote:
[big snip]
>
> The BOM is little-endian, I believe.
Correct.
> >in_file = codecs.open(filepath, mode, encoding="utf16???")
>
> Right you are. Here is the output produced by so doing:
You don't say which encoding you used, but I guess that you used
utf_16_le.
>
>
> u'
There are no such a method using to download a whole directory in the
lib of ' ftplib '.
thanks for anybody's help!
--
http://mail.python.org/mailman/listinfo/python-list
Thanks!
But:
- and Python 2.4.x?
- I have Python 2.4 and then "embbed Python 2.3 of OOo" ; how install
some things in this last Python? I dream to call Pywin32 from OOo...
- when I drive OOo from Python, via COM/Ole-automation, many things
not run (getStruct...); no solution?
--
@-salut
[EMAIL PROTECTED] wrote:
> all i want to do is post this form:
> HTML Code:
>
> action='http://login.myspace.com/index.cfm?fuseaction=login.process&'>
> name="password" >
Heya,
It might help to use one of the higher-level abstractions for dealing
with the web. twill (http://twill.idyll.org/)
[EMAIL PROTECTED] wrote:
> I have some unit testing code in one of my modules that appears to
> run without an error, but the unit test fails anyhow. Have a look at
> the output below -- the TestResult seems to have no errors and no
> failures, yet I get a system exit.
unittest.main() ALWAYS rais
lazaridis_com wrote:
> The "persist case" evaluates python persistency systems (or
> mechanisms), and will show my personal preference:
Do you feel that evaluating-for-evaluation's-sake produces a more
measured understanding of the value of a product than that taken from
its use in, say, actual de
On Wed, 06 Sep 2006 03:55:18 GMT, Richard Schulman
<[EMAIL PROTECTED]> wrote:
>...I'm now using the codec with
>improved results, but am still puzzled as to how to handle the row
>termination of \n\n, which is being interpreted as two rows instead of
>one.
Of course, I could do a double read on e
On 5 Sep 2006 19:50:27 -0700, "John Roth" <[EMAIL PROTECTED]>
wrote:
>> [T]he file I actually want to process is Unicode (utf-16 encoding).
>>...
>> in_file = open("c:\\pythonapps\\in-graf1.my","rU")
>>...
John Roth:
>You're not detecting the file encoding and then
>using it in the open statement
Fredrik Lundh wrote:
> Simon Forman wrote:
>
> > I'm sorry, your post makes very little sense.
>
> you're somewhat new here, right ? ;-)
>
>
Yah, I've been posting here about three months now. Why, did I miss
something? :-)
Peace,
~Simon
--
http://mail.python.org/mailman/listinfo/python-li
Thanks for your excellent debugging suggestions, John. See below for
my follow-up:
Richard Schulman:
>> The following program fragment works correctly with an ascii input
>> file.
>>
>> But the file I actually want to process is Unicode (utf-16 encoding).
>> The file must be Unicode rather than AS
>thermate
So the guy found burned aluminum on iron.
That doesn't mean there were military-grade incendiary devices anywhere
near the WTC.
You idiot.
--Blair
--
http://mail.python.org/mailman/listinfo/python-list
Thanks thermate but i guess this is a wrong place to post this. this is
a emacs help community and this by no means wat so ever is related to
emcas for that matter gnu.
The post is good but would be more appreciated if it was in the correct
place.
Cloud
[EMAIL PROTECTED] wrote:
> EVIDENCE: 911 was
[EMAIL PROTECTED] wrote:
>
> For those of us who have never used IronPython or Mono, is there a quick
> start document laying about somewhere? It wasn't clear to me where to even
> look. For example, is Mono == DotGnu?
I scribbled a rough howto. Hope it help.
Mono and DotGNU are two different p
Skip wrote:
For those of us who have never used IronPython or Mono, is there a
quick start document laying about somewhere? It wasn't clear to me
where to even look.
Okay, here we go:
1. Download IronPython
Go to http://www.codeplex.com/IronPython. Click Releases tab. Click
IronPython-1.0-Bin.z
Richard Schulman wrote:
> The following program fragment works correctly with an ascii input
> file.
>
> But the file I actually want to process is Unicode (utf-16 encoding).
> The file must be Unicode rather than ASCII or Latin-1 because it
> contains mixed Chinese and English characters.
>
> Whe
I have tried multiple ways of posting information to a website and have
failed. I have seen this problem on other forums can someone explain or
point me to information on how POST works through urllib an different
broweser (what is the difference).
my first attempt was out of the docs:
Code:
imp
"[EMAIL PROTECTED]" <[EMAIL PROTECTED]> writes:
> > I think it's even worse. The standard Python library offers
> > shared memory, but not cross-process locks.
>
> File locks are supported by the standard library (at least on Unix,
> I've not tried on Windows). They work cross-process and are a n
Justin Ezequiel wrote:
> [EMAIL PROTECTED] wrote:
> > What is the correct way to download a file through HTTP and save it to
> > the file name suggested by "Content-Disposition"?
> >
>
> Perhaps something along the lines of the following?
Thank you kindly.
--
http://mail.python.org/mailman/lis
Jim Hugunin wrote:
> I'm extremely happy to announce that we have released IronPython 1.0 today!
> http://www.codeplex.com/IronPython
> Thanks - Jim Hugunin (for the IronPython Team)
Congratulations I've been following IronPython too since you
announced it years back--it's really exciting
sanxiyn> Yes, it will run with Mono 1.1.17 or later out of the box with
sanxiyn> zero problems.
For those of us who have never used IronPython or Mono, is there a quick
start document laying about somewhere? It wasn't clear to me where to even
look. For example, is Mono == DotGnu?
(I'm
Hi Group!
Jessie here, Head of People for Limbo Mobile (www.41414.com); mobile
gaming company based in Burlingame, Ca.
We are looking for a python developer full-time to add to our team. Our
perfect dev has a couple of years experience, and is interested in
working within a small team. Our staff
Neal Becker wrote:
> Will it run with mono?
Yes, it will run with Mono 1.1.17 or later out of the box with zero
problems.
--
http://mail.python.org/mailman/listinfo/python-list
Jean-Paul Calderone <[EMAIL PROTECTED]> writes:
> >which more explicitly shows the semantics actually desired. Not that
> >"huge" a benefit as far as I can tell. Lisp programmers have gotten
> >along fine without it for 40+ years...
>
> Uh yea. No lisp programmer has ever written a with-* funct
Richard Schulman wrote:
[snip]
> in_line = in_file.readline()
[snip]
We'd already deduced that that line was incorrectly published.
Please don't start new threads like this; if you want to make a
correction, do a couple-of-lines reply to your original message.
Now please leave this new thread
The appended program fragment works correctly with an ascii input
file. But the file I actually want to process is Unicode (utf-16
encoding). This file must be Unicode rather than ASCII or Latin-1
because it contains mixed Chinese and English characters.
When I run the program I get an attribute_c
Richard Schulman wrote:
> The following program fragment works correctly with an ascii input
> file.
>
> But the file I actually want to process is Unicode (utf-16 encoding).
> The file must be Unicode rather than ASCII or Latin-1 because it
> contains mixed Chinese and English characters.
>
> When
On 05 Sep 2006 17:31:11 -0700, Paul Rubin <"http://phr.cx"@nospam.invalid>
wrote:
>
> def func(filename):
> with open(filename) as f:
>do_something_with(f)
> # f definitely gets closed when the "with" block exits
>
>which more explicitly shows the semantics actually desired. Not
I'm trying to use both nosetests and doctest with the tests
pulled out into a separate file. My problem is that it
seems that I need to use different import statements
depending on from where I run the tests.
Here's my directory structure:
/dir
__init__.py
/sub
__init__.py
Will it run with mono?
--
http://mail.python.org/mailman/listinfo/python-list
5 Sep 2006 03:44:47 -0700, Leon <[EMAIL PROTECTED]>:
> Greetings,
>
> Does anybody know of or is working on any python modules that allow for
> a direct but higher-level interface to OpenGL? For example, quick
> functions to draw lines, curves, and basic shapes; define hsb color
> mode; fill and st
"[EMAIL PROTECTED]" <[EMAIL PROTECTED]> writes:
> Having memory protection is superior to not having it--OS designers
> spent years implementing it, why would you toss out a fair chunk of it?
> Being explicit about what you're sharing is generally better than not.
Part of the win of programming i
EVIDENCE: 911 was CONTROLLED DEMOLITION to make muslims 2nd class
We have now video evidence that 911 was an INSIDE JOB like the USS
Liberty by ELEMENTS OF US GOVERNMENT.
Dont trust me Go and watch the videos on youtube.com and
video.google.com ..
THEY ARE ... MY GOD ... GREAT VIDEOS
The following program fragment works correctly with an ascii input
file.
But the file I actually want to process is Unicode (utf-16 encoding).
The file must be Unicode rather than ASCII or Latin-1 because it
contains mixed Chinese and English characters.
When I run the program below I get an attr
[EMAIL PROTECTED] wrote:
> Hi
>
> I want to write a python script that accepts input ( a single line of
> text) from another program (squid proxy) and sends back output ( a
> single line of text). I am not sure how to go about this
With a squid redirector (which is presumably what you mean) the
David Isaac wrote:
> Thanks to both Roberto and George.
> I had considered the recursive solution
> but was worried about its efficiency.
> I had not seen how to implement the numpy
> solution, which looks pretty nice.
>
> Thanks!
> Alan
>
>
You could also use pyarray, which mimics numpy's index
Tim Williams:
> You could also use a list comprehension for your case
> >>> alist = [1 ,2 ,3]
> >>> alist = [x for x in alist if x != 2]
> >>> alist
> [1, 3]
The list comprehension filtering is the simpler and often the best
solution. For memory-conscious people this is another possible
(un-python
Thanks guys!, Ill look into your suggestions. I'm actually currently
working directly with pyOpenGL, but hopefully Ill find something that
would make me more efficient. I might end up writing a library myself.
--
http://mail.python.org/mailman/listinfo/python-list
bayerj wrote:
> > I'm going to assume that it's supposed to work like this, but could
> > someone tell me the reasoning behind it? I.E. why is 3 skipped?
>
> Because:
>
> >>> alist[2]
> 3
>
> You are removing the third item, not the second.
This is incorrect.
You may need to remind yourself that
Jim Hugunin enlightened us with:
> I'm extremely happy to announce that we have released IronPython 1.0
> today! http://www.codeplex.com/IronPython
Congratulations!
> We were also able to release IronPython publicly from Microsoft with
> a BSD-style license. [...] Without the drive and input of
Hi folks!
The two small snippets I wrote two days ago were well received. With
the danger of being called a hero I proceded and wrote a proper
article about OpenOffice.org and Python.
It contains the following sections:
* Preparation
* Gaining access to a document
* Getting to the d
On 5 Sep 2006 16:05:36 -0700, bayerj <[EMAIL PROTECTED]> wrote:
> > I'm going to assume that it's supposed to work like this, but could
> > someone tell me the reasoning behind it? I.E. why is 3 skipped?
>
> Because:
>
> >>> alist[2]
> 3
>
> You are removing the third item, not the second.
>
Actu
sonald wrote:
> Dear All,
> I am working on a module that validates the provided CSV data in a text
> format, which must be in a predefined format.
> We check for the :
>
[snip]
>
> 3. valid-text expressions,
> Example:
> ValidText('Minor', '[yYnN]')
>
> Parameters:
>
> I'm going to assume that it's supposed to work like this, but could
> someone tell me the reasoning behind it? I.E. why is 3 skipped?
Because:
>>> alist[2]
3
You are removing the third item, not the second.
--
http://mail.python.org/mailman/listinfo/python-list
On 05/09/06, Gregory Piñero <[EMAIL PROTECTED]> wrote:
> On 9/5/06, Tim Williams <[EMAIL PROTECTED]> wrote:
> > > It does already, you just haven't grasped list fully yet :):)
> > >
> > > when you remove 2 from alist, the list becomes length 2, there is no
> > > longer a 3rd item in the list to i
Chris Brat wrote:
> Hi
>
> Wouldn't this only cause problems with large lists - for once off
> scripts with small lists it doesn't seem like a big issue to me.
>
> Regards,
> Chris
>
> Bruno Desthuilliers wrote:
> > Chris Brat a écrit :
> > > Thanks, thats exactly what I was looking for - very nea
On 9/5/06, Tim Williams <[EMAIL PROTECTED]> wrote:
> > It does already, you just haven't grasped list fully yet :):)
> >
> > when you remove 2 from alist, the list becomes length 2, there is no
> > longer a 3rd item in the list to iterate over.
> >
> > Try this
> >
> > > >>> alist=[1 ,2 ,3, 4]
>
http://pyopengl.sourceforge.net/ I wouldn't begin to tell you how to
install this.. Looks like russian roulette with virus since the .dll's
are not available and are not linked from the site but are available
from lots of places in the google search. Looks like there is a
copyright that might pre
I think my question is clear.., is there any way to print any text on a portable way?..., and actually, i don't know how to print at all.., just give me some pointers, name a module, and i can investigate for myself.. sorry for my english, thanks in advance..
ps: i prefer a Standard Library module
Félicitations. Et chapeau pour votre travail.
Michel Claveau
--
http://mail.python.org/mailman/listinfo/python-list
On 05/09/06, Tim Williams <[EMAIL PROTECTED]> wrote:
> On 05/09/06, Gregory Piñero <[EMAIL PROTECTED]> wrote:> I'm going
> to assume that it's supposed to work like this, but could
> > someone tell me the reasoning behind it? I.E. why is 3 skipped?
> >
> > >>> alist=[1,2,3]
> > >>> for item in ali
On 05/09/06, Gregory Piñero <[EMAIL PROTECTED]> wrote:> I'm going
to assume that it's supposed to work like this, but could
> someone tell me the reasoning behind it? I.E. why is 3 skipped?
>
> >>> alist=[1,2,3]
> >>> for item in alist:
> print item
> if item==2:
>
Congratulations, Jim! Truly and amazing vision you and your development staff have brought into fruition :)From my recent post to the O'Reilly Windows DevCenter,ref:
http://www.oreillynet.com/windows/blog/2006/09/jim_huguninmsft_announce_ironp.html
Congratulations are in order to Jim Hugunin, Din
On 05 Sep 2006 13:19:03 -0700, Paul Rubin <"http://phr.cx"@nospam.invalid>
wrote:
>[EMAIL PROTECTED] writes:
>> It was removed at one point in the dim, dark past (circa Python 1.4) on an
>> experimental basis. Aside from the huge amount of work, it resulted in
>> significantly lower performance f
I'm going to assume that it's supposed to work like this, but could
someone tell me the reasoning behind it? I.E. why is 3 skipped?
>>> alist=[1,2,3]
>>> for item in alist:
... print item
... if item==2:
... alist.remove(item)
...
1
2
>>>
Bonus Question:
Can we m
Ah, indeed it does...my distro didn't have it, but a quick download and
compile and there it is.
Thanks a bunch,
-Dave
Keith Dart wrote:
On 9/5/06, David
Hirschfield <[EMAIL PROTECTED]>
wrote:
This is good info...but I'm
looking for the opposite direction: I want
to place so
This is good info...but I'm looking for the opposite direction: I want
to place some arbitrary command output text into the clipboard, not get
the current selection out of the clipboard.
Any help on that end?
-Dave
kdart wrote:
David Hirschfield wrote:
Strange request, but is the
I'm extremely happy to announce that we have released IronPython 1.0 today!
http://www.codeplex.com/IronPython
I started work on IronPython almost 3 years ago. My initial motivation for the
project was to understand all of the reports that I read on the web claiming
that the Common Language Ru
Hi
Wouldn't this only cause problems with large lists - for once off
scripts with small lists it doesn't seem like a big issue to me.
Regards,
Chris
Bruno Desthuilliers wrote:
> Chris Brat a écrit :
> > Thanks, thats exactly what I was looking for - very neat.
> >
> Just note that both solutions
>> What I'll do is re-format my rant, suggest how *I* would do the
>> documentation, fix the errors I found in the examples and send it off
>> to the Python bug tracking as suggested in the manuals.
>> How's that as a plan?
That's fine. Reformat your rant as a documentation bug
[EMAIL PROTECTED] writes:
> It was removed at one point in the dim, dark past (circa Python 1.4) on an
> experimental basis. Aside from the huge amount of work, it resulted in
> significantly lower performance for single-threaded apps (that is, the
> common case).
That's probably because they had
Hello,
I am looking for Python code no other language wanted) that I couls
use/reuse/adapt to implement (via CGI, no specific app server wanted)
a web-based app that would offer the following functionality:
- browse a file hierarchy perhaps dealing with access rights check
- classical file manag
[EMAIL PROTECTED] wrote:
> >> I think your whole experience is based on it.
>
> >> But shouldn't a significant feature like that be explained in the
> >> Python manuals? Why should I go dig up Sqlite FAQs to learn what
> >> should have been in the manuals?
>
> I don't know, but I will
David Hirschfield wrote:
> Strange request, but is there any way to get text into the linux
> copy-paste buffer from a python script ?
>
> I know the standard python libraries won't have that functionality
> (except as a side-effect, perhaps?), but is there a simple trick that
> would do it on lin
looping napisał(a):
> I have to make internet connections through an ISA proxy server that
> use NTLM or Kerberos authorization method.
> I've found a program in python called ntlmaps that act like a proxy and
> could make the NTLM authentication, but you have to run it and make all
> your connect
[EMAIL PROTECTED] wrote:
> You can do the same on Windows if you use CreateProcessEx to create the
> new processes and pass a NULL SectionHandle. I don't think this helps
> in your case, but I was correcting your impression that "you'd have to
> physically double the computer's memory for a dual c
matt> From what I understand in order to guarantee thread safety Python
matt> implements an Global Interpreter Lock. Which removes the
matt> concurrency, but provides thread safety. Is Python 2.4 still like
matt> this and if I used Python to handle rpc requests and responses
ma
Darwinism in action! :-P
--
http://mail.python.org/mailman/listinfo/python-list
On 2006-09-05, George Sakkis <[EMAIL PROTECTED]> wrote:
> Neil Cerutti wrote:
>
>> On 2006-09-04, George Sakkis <[EMAIL PROTECTED]> wrote:
>> > x=raw_input('\nType a number from 1 to 20')
>> > try:
>> > x = int(x)
>> > if x<1 or x>20: raise ValueError()
>> > except ValueError:
>> > Do_B
Strange request, but is there any way to get text into the linux
copy-paste buffer from a python script ?
I know the standard python libraries won't have that functionality
(except as a side-effect, perhaps?), but is there a simple trick that
would do it on linux? A command line to get text int
- Make Up to $50K -
This was my ad a month ago. I didn't make $50k, but I made $14,565,
that's $14,555, more than I invested into this little game. I
can't believe it. I'm still running the ads and sending emails so
maybe next month I will make $50,000. This is so much fun!!! My wife
thou
Hello
Ist there a way to search a Adressbook over Python for a special contact.
I know how i read and write a contact, but know i have to search over
Python for some contacts, because the adress book has know over 1700
entrys, and it tooks a long time to get them all over the Com object to
pyth
"Aahz" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> http://www.sfgate.com/cgi-bin/article.cgi?file=/news/archive/2006/09/05/national/a082618D20.DTL
He should have been practicing pair pet care ;-)
tjr
--
http://mail.python.org/mailman/listinfo/python-list
From what I understand in order to guarantee
thread safety Python implements an Global Interpreter Lock. Which
removes the concurrency, but provides thread safety. Is Python 2.4
still like this and if I used Python to handle rpc requests and
responses would it be efficient in a multithreaded sense.
Just in case you didn't notice.
--
http://mail.python.org/mailman/listinfo/python-list
http://www.sfgate.com/cgi-bin/article.cgi?file=/news/archive/2006/09/05/national/a082618D20.DTL
--
Aahz ([EMAIL PROTECTED]) <*> http://www.pythoncraft.com/
I support the RKAB
--
http://mail.python.org/mailman/listinfo/python-list
I want to accept a cStringIO object in a function in a python extension
module. How do I do this?
e.g.,
static PyObject *myfunc(PyObject *self, PyObject *args)
{
PyObject *cstringio;
if (!PyArg_ParseTuple(args, "O:cStringIO", &cstringio)) {
PyErr_SetString(PyExc_ValueError,
>> I think your whole experience is based on it.
>> But shouldn't a significant feature like that be explained in the
>> Python manuals? Why should I go dig up Sqlite FAQs to learn what
>> should have been in the manuals?
I don't know, but I will take a stab at a plausible explan
Neil Cerutti wrote:
> On 2006-09-04, George Sakkis <[EMAIL PROTECTED]> wrote:
> > x=raw_input('\nType a number from 1 to 20')
> > try:
> > x = int(x)
> > if x<1 or x>20: raise ValueError()
> > except ValueError:
> > Do_B
> > else:
> > Do_A
> >
> > If you want to distinguish between
Andre> This seems to be an important issue and fit for discussion in the
Andre> context of Py3k. What is Guido's opinion?
Dunno. I've never tried channeling Guido before. You'd have to ask him.
Well, maybe Tim Peters will know. He channels Guido on a fairly regular
basis.
Skip
--
htt
Lawrence Oluyede <[EMAIL PROTECTED]> wrote:
> Take a look here:
> http://lists.ironpython.com/pipermail/users-ironpython.com/2006-March/00
> 2049.html
> and this thread:
> http://www.mail-archive.com/users@lists.ironpython.com/msg01826.html
Also this: http://www.codeproject.com/useritems/ipaspnet
On Saturday 02 September 2006 11:41, you wrote:
> [EMAIL PROTECTED] wrote:
> > Hi. I'm new to Python . . .very new. I was just wondering, once I've
> > written a program that opens the graphics window and I've got some
> > things going on in the grahics window, how do I display text in the
> > gra
Sandra-24 <[EMAIL PROTECTED]> wrote:
> Oh I'm aware of that, but it's not what I'm looking for. Mod_mono just
> lets you run ASP.NET on Apache. I'd much rather use Python :) Now if
> there was a way to run IronPython on Apache I'd be interested.
Take a look here:
http://lists.ironpython.com/piper
Duncan Booth wrote:
> "Paddy" <[EMAIL PROTECTED]> wrote:
>
> >
> > import module1
> > # namespace becomes:
> >\-/
> > |module1.moduleFunc1 |
> > |module1.moduleClass1: |
> > | class1Method1 |
> > | class1Method2 |
> > |module1.moduleFu
Marc 'BlackJack' Rintsch wrote:
> In <[EMAIL PROTECTED]>,
> [EMAIL PROTECTED] wrote:
>
> > But watch this: being clueless (but not stupid) is a gift I have
> > for troubleshooting. I tried (incorrectly) to insert another record:
> >
> > cur.execute("insert into book(title, author, published) value
This seems to be an important issue and fit for discussion in the context of Py3k. What is Guido's opinion?As a developer of a multi-threaded system I would like to know more about these issues, so it's no time wasted for me... ;-)
regardsAndreOn 9/5/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
Bryan Olson wrote:
> I think it's even worse. The standard Python library offers
> shared memory, but not cross-process locks.
File locks are supported by the standard library (at least on Unix,
I've not tried on Windows). They work cross-process and are a normal
method of interprocess locking ev
(ack! forgot to push the send button several days ago - hopefully this isn't
woefully out-of-date now...)
neil> Based on the number of people still using 2.3, it looks to me like
neil> there would be interest.
aahz> Yes; the real question is whether there is enough labor available
Richard> It would probably be easier to find smarter friends than to
Richard> remove the GIL from Python.
And if the friends you find are smart enough, they can remove the GIL for
you!
Skip
--
http://mail.python.org/mailman/listinfo/python-list
Steve> Given the effort that GIL-removal would take, I'm beginning to
Steve> wonder if PyPy doesn't offer a better way forward than CPython,
Steve> in terms of execution speed improvements returned per
Steve> developer-hour.
How about execution speed improvements per hour of discu
[EMAIL PROTECTED] wrote:
> Sandra> However, I don't expect that the GIL can be safely removed from
> Sandra> CPython.
>
> It was removed at one point in the dim, dark past (circa Python 1.4) on an
> experimental basis. Aside from the huge amount of work, it resulted in
> significantly low
Tim Chase wrote:
And receiving hotmail (or any outher webmail) using scraping
techniques is a daunting task, to say the least - you should
forget about that IMHO.
There's a perl project called "gotmail" that will do the scraping
to dump in a local mailbox file (I don't remem
You don't need the setup command. Just place SE.py and SEL.py into a path where
the import can find it. Also make sure SE.py and
SEL.py are spelled exactly like this. Linux requires the extension to be lower
case, as I was myself made aware of by an alert
person who was also experiencing import p
"km" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> True, since smartness is a comparison, my friends who have chosen java
> over python for considerations of a true threading support in a
> language are smarter, which makes me a dumbo ! :-)
No, but I think you making unwise assu
1 - 100 of 146 matches
Mail list logo
