Thank you very much. Appreciated ! But the first requirement was to convert
format1 to format2 as below:
set interface ethernet2/5 ip 10.17.10.1/24 (format 1)
set interfaces ge-0/0/0 unit 0 family inet address 10.17.10.1/24 (format 2)
(set, interface, ip) = (set, interfaces, family inet
On Saturday, December 13, 2014 6:31:34 AM UTC+4, Jason Friedman wrote:
Thanks for the reply. Yes I can make the all possible keywords/values for
both formate. But after that what gonna be the logic to convert one format to
other format. Like to convert one line below are the keywords:
Thanks for the reply. I am learning python using CBT nuggets for python. But
If you can refer me some good course, that should be practical then it would
be great.
For my requirement, if you can give me the best approach to start with or
high level steps or give me some sample cod, I
Hi Jason
Thank you very much. Appreciated ! But the first requirement was to convert
format1 to format2 as below:
set interface ethernet2/5 ip 10.17.10.1/24 (format 1)
set interfaces ge-0/0/0 unit 0 family inet address 10.17.10.1/24 (format 2)
(set, interface, ip) = (set, interfaces, family inet
Thanks for the reply. Yes I can make the all possible keywords/values for
both formate. But after that what gonna be the logic to convert one format
to other format. Like to convert one line below are the keywords:
set interface ethernet2/5 ip 10.17.10.1/24 (format 1)
set interfaces
I am network engineer and not expert in programming. I would like to make
one python script to convert juniper netscreen firewall configuration into
juniper SRX firewall configuration.
Looks pretty tricky, do you have a specification for each format containing
all the possible
Hi Jason
Thanks for the reply. Yes I can make the all possible keywords/values for both
formate. But after that what gonna be the logic to convert one format to other
format. Like to convert one line below are the keywords:
set interface ethernet2/5 ip 10.17.10.1/24 (format 1)
set interfaces
Hello Experts
I am network engineer and not expert in programming. I would like to make one
python script to convert juniper netscreen firewall configuration into juniper
SRX firewall configuration. Sample is below. I would appreciate if anybody can
give me the high level steps to start with.