Jon Doron writes:
> Add a new query/set which changes the memory GDB sees to physical memory
> only.
>
> gdb> maint packet qqemu.PhyMemMode
> will reply the current phy_mem_mode state (1 for enabled, 0 for disabled)
> gdb> maint packet Qqemu.PhyMemMode:1
> Will make GDB read/write only to
On 5/13/19 11:14 PM, Yoshinori Sato wrote:
> Signed-off-by: Yoshinori Sato
> ---
> MAINTAINERS | 19 +++
> 1 file changed, 19 insertions(+)
Reviewed-by: Richard Henderson
r~
On 5/13/19 11:14 PM, Yoshinori Sato wrote:
> This patch series is added Renesas RX target emulation.
>
> I fixed the ROM address because v11 was incorrect.
>
> My git repository is bellow.
> git://git.pf.osdn.net/gitroot/y/ys/ysato/qemu.git tags/rx-20190514
>
> Testing binaries bellow.
> u-boot
Jon Doron writes:
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 36 ++--
> 1 file changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 2fd0d66f4d..d678191705 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -2239,13
On Wed, May 15, 2019 at 07:13:56PM +0200, Stefan Priebe - Profihost AG wrote:
> Hello list,
>
> i've updated my host to kernel 4.19.43 and applied the following patch
> to my qemu 2.12.1:
> https://bugzilla.suse.com/attachment.cgi?id=798722
>
> But my guest running 4.19.43 still says:
>
On May 15, 2019 12:07 PM, "Peter Maydell" wrote:
>
> On Tue, 14 May 2019 at 20:16, Aleksandar Markovic
> wrote:
> >
> > On May 13, 2019 11:14 PM, "Richard Henderson" <
richard.hender...@linaro.org>
> > wrote:
> > >
> > > On 5/11/19 5:47 AM, Aleksandar Markovic wrote:
> > > > If no, the patch
On Fri, May 10, 2019 at 07:04:10PM +0100, Ernest Esene wrote:
> Add support for Linux I2C character device for I2C device passthrough
> For example:
> -chardev i2c,address=0x46,path=/dev/i2c-N,id=i2c-chardev
>
> QEMU supports emulation of I2C devices in software but currently can't
> passthrough
Hi!
Let me add my 0.2 cents to this discussion by sharing my summary of INTx
emulation in VFIO:
COMMON:
* real interrupt is signaled in the kernel
* vfio-pci kernel interrupt hanlder (vfio_intx_handler), masks the INTx flag
* vfio-pci kernel interrupt handler triggers an eventfd, if the
Alex Williamson 于2019年5月15日周三 下午10:54写道：
> On Wed, 15 May 2019 17:27:52 +0300
> Maxim Levitsky wrote:
>
> > Hi!
> >
> > Let me add my 0.2 cents to this discussion by sharing my summary of INTx
> emulation in VFIO:
> >
> > COMMON:
> > * real interrupt is signaled in the kernel
> > * vfio-pci
On 5/15/19 3:01 PM, Stefano Garzarella wrote:
> On Wed, May 15, 2019 at 02:33:03PM +0200, Markus Armbruster wrote:
>> Stefano Garzarella writes:
>>
>>> Reword and add a missing parentheses at the end of the
>>> error message.
>>>
>>> Signed-off-by: Stefano Garzarella
>>> Reviewed-by: Marc-André
On Wed, May 15, 2019 at 10:22:08AM -0700, Richard Henderson wrote:
> On 5/15/19 9:53 AM, Daniel P. Berrangé wrote:
> > On Tue, May 14, 2019 at 12:16:30PM -0700, Richard Henderson wrote:
> >> For user-only, we require only the random number bits of the
> >> crypto subsystem.
> >>
> >> We need to
Hi Alex,
I'm very sorry for the late reply, your emails got mixed up with
everything else in qemu-devel; I didn't setup my mail filters very
well (my bad).
On 4/25/19 9:45 AM, Alex Bennée wrote:
>
> Jan Bobek writes:
>
>> Hi all,
>>
>
>> Thanks,
>> -Jan Bobek
>>
>> P.S. This is my first time
On Wed, 15 May 2019 17:27:52 +0300
Maxim Levitsky wrote:
> Hi!
>
> Let me add my 0.2 cents to this discussion by sharing my summary of INTx
> emulation in VFIO:
>
> COMMON:
> * real interrupt is signaled in the kernel
> * vfio-pci kernel interrupt hanlder (vfio_intx_handler), masks the INTx
Daniel P. Berrangé writes:
> On Wed, May 15, 2019 at 08:34:17AM +0200, Markus Armbruster wrote:
>> Jason Wang writes:
>>
>> > On 2019/5/14 下午8:18, Markus Armbruster wrote:
>> >> Peter Maydell writes:
>> >>
>> >>> On Mon, 13 May 2019 at 14:21, Markus Armbruster
>> >>> wrote:
>> Perhaps
On Wed, May 15, 2019 at 04:54:04PM +0200, Markus Armbruster wrote:
> Daniel P. Berrangé writes:
>
> > On Wed, May 15, 2019 at 08:34:17AM +0200, Markus Armbruster wrote:
> >> Jason Wang writes:
> >>
> >> > On 2019/5/14 下午8:18, Markus Armbruster wrote:
> >> >> Peter Maydell writes:
> >> >>
> >>
On 14/05/2019 21:16, Richard Henderson wrote:
> For user-only, we require only the random number bits of the
> crypto subsystem.
>
> We need to preserve --static linking, which for many recent Linux
> distributions precludes using GnuTLS or GCrypt. Instead, use our
> random-platform module
If a machine is started with ic-mode=xive but the guest only knows
about XICS, eg. an RHEL 7.6 guest, the kernel panics. This is
expected but a bit unfortunate since the crash doesn't provide
much information for the end user to guess what's happening.
Detect that during CAS and exit QEMU with a
Library functions should not depend on global_qtest functions like
writew() and writeq(), so that they can also be used in tests that
deal with multiple QTestStates at the same time (like migration tests).
Signed-off-by: Thomas Huth
---
tests/libqos/virtio-mmio.c | 2 +-
Here are some more patches that get rid of global_qtest and related
functions in some of the qtests (hacked along the way while waiting
for other compilation and test processes to finish). A global variable
like global_qtest is very problematic in tests that track multiple test
states (like
On 5/15/19 7:54 AM, Markus Armbruster wrote:
> We don't want to deprecate qemu-bridge-helper while libvirt has a
> sensible use for it.
>
> We can still deprecate -netdev tap parameter "helper" and -netdev bridge
> entirely.
>
> Once they're gone, qemu-bridge-helper wull have no user within
No, --disable-tools won't change the qemu-* binaries that are built. It
just stops us trying to build some binaries like the 'ivshmem-client'
one that was causing a problem for you.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
This patch series provides the new "md-clear" feature that is used
for mitigation with CVE-2018-12126, CVE-2018-12127, CVE-2018-12130,
CVE-2019-11091.
Assuming you have the updated microcode and kernel to support the
md-clear feature, then using "-cpu host" will expose the new
feature to guests.
Jon Doron writes:
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 48
> 1 file changed, 32 insertions(+), 16 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 8dc2e1d507..daa602edc3 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@
Jon Doron writes:
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 170 +++---
> 1 file changed, 110 insertions(+), 60 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 9b0556f8be..d56d0fd235 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
>
Jon Doron writes:
> Follow GDB general query/set packet conventions, qemu.sstep can now
> be set with the following command as well:
> gdb> maint packet Qqemu.sstep:Value
I;m not sure about exposing internal values to a protocol like this.
Maybe text based flags would be better?
>
>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Signed-off-by: Thomas Huth
---
tests/numa-test.c | 53 +++
1 file changed,
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Signed-off-by: Thomas Huth
---
tests/qom-test.c | 28 +---
1 file changed, 13 insertions(+), 15
On Mon, May 06, 2019 at 12:44:56PM -0500, Eric Blake wrote:
> On 5/4/19 1:51 AM, Thomas Huth wrote:
>
> >> Hmm, it's passing for me on ext4, but that probably means we have
> >> different configuration parameters. I'm not sure how to easily show what
> >> parameters a particular ext4 partition
Jon Doron writes:
> Signed-off-by: Jon Doron
Reviewed-by: Alex Bennée
> ---
> gdbstub.c | 51 +--
> 1 file changed, 33 insertions(+), 18 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index e9a3d0c2bc..8dc2e1d507 100644
> ---
Well, the symlinks didn't resolve the issue. I just tried them to see if
this will solve the issue.
And I installed a lot of packages, blindly trying to solve this issue.
Using full Raspbian instead of Raspbian Lite was also an attempt to do
so. I'm just an advanced Linux user, not a developer! I
Markus Armbruster writes:
> Daniel P. Berrangé writes:
>
>> On Wed, May 15, 2019 at 08:34:17AM +0200, Markus Armbruster wrote:
>>> Jason Wang writes:
>>>
>>> > On 2019/5/14 下午8:18, Markus Armbruster wrote:
>>> >> Peter Maydell writes:
>>> >>
>>> >>> On Mon, 13 May 2019 at 14:21, Markus
Update x86 CPU model guidance to recommend that the md-clear feature is
manually enabled with all Intel CPU models, when supported by the host
microcode.
Signed-off-by: Daniel P. Berrangé
---
docs/qemu-cpu-models.texi | 12
1 file changed, 12 insertions(+)
diff --git
Juan Quintela writes:
> Signed-off-by: Juan Quintela
>
> ---
> Rename it to NONE
> Fix typos (dave)
> ---
> hmp.c| 17 +
> hw/core/qdev-properties.c| 13 +
> include/hw/qdev-properties.h | 1 +
> migration/migration.c| 16
On 5/15/19 9:53 AM, Daniel P. Berrangé wrote:
> On Tue, May 14, 2019 at 12:16:30PM -0700, Richard Henderson wrote:
>> For user-only, we require only the random number bits of the
>> crypto subsystem.
>>
>> We need to preserve --static linking, which for many recent Linux
>> distributions precludes
Jon Doron writes:
> qemu.Supported query reply back with the supported qemu query/set
> commands (commands are seperated with a semicolon from each other).
>
> gdb> maint packet qqemu.Supported
>
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 9 +
> 1 file changed, 9 insertions(+)
>
On 5/15/19 9:55 AM, Markus Armbruster wrote:
> Proposal:
>
> 1. Add qemu-bridge-helper.c to Jason's "Network device backends"
>
> 2. Deprecate -netdev tap parameter "helper"
>
> 3. Improve documentation of -netdev bridge
>
> 4. Create a manual page for qemu-bridge-helper that also covers
>
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Signed-off-by: Thomas Huth
---
tests/hd-geo-test.c | 76 -
1 file changed,
Jon Doron writes:
> gdb> maint packet qqemu.kvm.Rdmsr:MsrIndex
gdbserver already has a mechanism for exposing system registers see:
commit 200bf5b7ffea635079cc05fdfb363372b9544ce7
Author: Abdallah Bouassida
Date: Fri May 18 17:48:07 2018 +0100
for an example. As MSR's are very
From: Paolo Bonzini
md-clear is a new CPUID bit which is set when microcode provides the
mechanism to invoke a flush of various exploitable CPU buffers by invoking
the VERW instruction.
Signed-off-by: Paolo Bonzini
---
target/i386/cpu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
On 5/13/19 11:14 PM, Yoshinori Sato wrote:
> Signed-off-by: Yoshinori Sato
> ---
> include/qemu/bitops.h | 38 ++
> 1 file changed, 38 insertions(+)
Reviewed-by: Richard Henderson
r~
Jon Doron writes:
There is a bit more going on here than a simple conversion. I think we
need some additional commentary about the format of the data coming
back.
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 62 +++
> 1 file changed, 40
Jon Doron writes:
> Signed-off-by: Jon Doron
Reviewed-by: Alex Bennée
> ---
> gdbstub.c | 25 +++--
> 1 file changed, 19 insertions(+), 6 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 9fe130f30d..9b0556f8be 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@
Jon Doron writes:
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 41 +++--
> 1 file changed, 31 insertions(+), 10 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index daa602edc3..adfe39b3a3 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -1734,6
Jon Doron writes:
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 31 +++
> 1 file changed, 23 insertions(+), 8 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index adfe39b3a3..3478ac778d 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -1757,6 +1757,21 @@
On Tue, May 14, 2019 at 12:16:30PM -0700, Richard Henderson wrote:
> For user-only, we require only the random number bits of the
> crypto subsystem.
>
> We need to preserve --static linking, which for many recent Linux
> distributions precludes using GnuTLS or GCrypt. Instead, use our
>
On 5/15/19 9:42 AM, Laurent Vivier wrote:
> On 14/05/2019 21:16, Richard Henderson wrote:
>> For user-only, we require only the random number bits of the
>> crypto subsystem.
>>
>> We need to preserve --static linking, which for many recent Linux
>> distributions precludes using GnuTLS or GCrypt.
Jon Doron writes:
A bit more for the commit message here as there seems to be a fair
amount going on.
> Signed-off-by: Jon Doron
> ---
> gdbstub.c | 327 ++
> 1 file changed, 327 insertions(+)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index
Hello list,
i've updated my host to kernel 4.19.43 and applied the following patch
to my qemu 2.12.1:
https://bugzilla.suse.com/attachment.cgi?id=798722
But my guest running 4.19.43 still says:
Vulnerable: Clear CPU buffers attempted, no microcode; SMT Host state
unknown
while the host says:
Jon Doron writes:
> Signed-off-by: Jon Doron
Reviewed-by: Alex Bennée
> ---
> gdbstub.c | 11 ++-
> 1 file changed, 2 insertions(+), 9 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index d678191705..8bdfae4b29 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -2259,17
Use a local QTestState variable, so that we can finally get rid
of the undesired global_qtest variable in this file, too.
Signed-off-by: Thomas Huth
---
tests/q35-test.c | 39 ++-
1 file changed, 18 insertions(+), 21 deletions(-)
diff --git
qtest_start() + qtest_end() should be avoided, since they use the
global_qtest variable that we want to get rid of in the long run.
Use qtest_init() and qtest_quit() instead.
Signed-off-by: Thomas Huth
---
tests/device-introspect-test.c | 85 ++
1 file changed,
Jon Doron writes:
> This patch series refactors the old gdbstub command packets handler
> with a new infrastructure which should ease extending and adding new
> and missing gdb command packets.
Jon,
I've finished my review and things are looking pretty good. The code is
a good clean-up and
Similar to VECTOR FIND ELEMENT EQUAL, however the search also stops on
any inequality. A match for inequality seems to have precedence over
a match for zero, because both elements have to be zero.
Signed-off-by: David Hildenbrand
---
target/s390x/helper.h| 6
From: Philippe Mathieu-Daudé
Move the TYPE_PIIX4_PM definition to the corresponding header,
so other files can use it.
Signed-off-by: Philippe Mathieu-Daudé
Message-Id: <20190427144025.22880-2-phi...@redhat.com>
Signed-off-by: Paolo Bonzini
---
hw/acpi/piix4.c | 2 --
From: Laurent Vivier
When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).
Suggested-by: Paolo Bonzini
Signed-off-by: Laurent Vivier
Message-Id: <20190401141222.30034-3-lviv...@redhat.com>
---
Makefile | 36
[ add Mike and dm-devel ]
Mike, any concerns with the below addition to the device-mapper-dax
implementation?
On Tue, May 14, 2019 at 7:58 AM Pankaj Gupta wrote:
>
> This patch sets dax device 'DAXDEV_SYNC' flag if all the target
> devices of device mapper support synchrononous DAX. If device
From: Laurent Vivier
Some directories are built only for softmmu targets,
and the related trace-event-subdirs must do the same
Signed-off-by: Laurent Vivier
Reviewed-by: Stefan Hajnoczi
Message-Id: <20190401141222.30034-2-lviv...@redhat.com>
---
Makefile.objs | 12 +++-
1 file
Hello all,
I am attempting to write PCIe drivers for my OP-TEE project against
the Cortex-A57 using the virt machine. I am using the default
packaged qemu, 3.0.93v3.1.0-rc3-dirty and v4.0.0-rc4. I have added
the PCIE device to the page table of the OS and when I try to write to
PIO (0xCF8) I
On Tue, May 14, 2019 at 7:55 AM Pankaj Gupta wrote:
>
> This patch adds functionality to perform flush from guest
> to host over VIRTIO. We are registering a callback based
> on 'nd_region' type. virtio_pmem driver requires this special
> flush function. For rest of the region types we are
245 is a bit flakey for me, because it uses block jobs that copy 1 MB of
data but have a buffer size of 512 kB, so they may be done before the
test gets to do the things it wants to do while the check is running.
(Rate limiting doesn’t change this.)
The boring way to fix this would be to increase
On Wed, May 15, 2019 at 09:38:00PM +0200, Laurent Vivier wrote:
> On 15/05/2019 19:49, Daniel P. Berrangé wrote:
> > On Wed, May 15, 2019 at 10:22:08AM -0700, Richard Henderson wrote:
> >> On 5/15/19 9:53 AM, Daniel P. Berrangé wrote:
> >>> On Tue, May 14, 2019 at 12:16:30PM -0700, Richard
This message does not make any sense when it appears as the response to
making an R/W node read-only. We should detect that case and emit a
different message, then.
Signed-off-by: Max Reitz
---
block.c | 17 -
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git
Signed-off-by: David Hildenbrand
---
target/s390x/helper.h| 6 +
target/s390x/insn-data.def | 2 ++
target/s390x/translate_vx.inc.c | 34 ++
target/s390x/vec_string_helper.c | 41
4 files changed, 83 insertions(+)
This is the third part of vector instruction support for s390x. It is based
on part 2, which is will send a pull-request for to Conny soon.
Part 1: Vector Support Instructions
Part 2: Vector Integer Instructions
Part 3: Vector String Instructions
Part 4: Vector Floating-Point Instructions
The
On Tue, May 14, 2019 at 8:25 AM Pankaj Gupta wrote:
>
>
> > On 5/14/19 7:54 AM, Pankaj Gupta wrote:
> > > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > > index 35897649c24f..94bad084ebab 100644
> > > --- a/drivers/virtio/Kconfig
> > > +++ b/drivers/virtio/Kconfig
> > > @@ -42,6
> + vpmem->vdev = vdev;
> + vdev->priv = vpmem;
> + err = init_vq(vpmem);
> + if (err) {
> + dev_err(>dev, "failed to initialize virtio pmem vq's\n");
> + goto out_err;
> + }
> +
> + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> +
Do not create a TCX if "-vga none" was passed on the command line.
Remove some dead code along the way to avoid big reindentation.
Signed-off-by: Paolo Bonzini
---
hw/sparc/sun4m.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
From: Philippe Mathieu-Daudé
Commit 72c194f7e75c added a non-null check on the 'obj' pointer.
Later, commit 500b11ea5095 added code which uses the 'obj'
pointer _before_ the assertion check. Move the assertion
_before_ the pointer use.
Signed-off-by: Philippe Mathieu-Daudé
Message-Id:
From: Philippe Mathieu-Daudé
The ne2000.c file contains functions common the the ISA and PCI
devices. To allow to build with one or another, extract the PCI
specific part into a new file.
This fix an issue where the NE2000_ISA Kconfig had to pull the
full PCI core objects.
Signed-off-by:
On Wed, May 15, 2019 at 6:11 AM Alex Bennée wrote:
>
>
> Alistair Francis writes:
>
> > Commit 89e68b575 "target/arm: Use vector operations for saturation"
> > causes this abort() when booting QEMU ARM with a Cortex-A15:
>
> You may want to check your email settings because when I tried to apply
From: Philippe Mathieu-Daudé
When building with CONFIG_Q35=n, we get:
LINKx86_64-softmmu/qemu-system-x86_64
/usr/bin/ld: hw/i386/acpi-build.o: in function `acpi_get_misc_info':
/source/qemu/hw/i386/acpi-build.c:243: undefined reference to `ich9_lpc_find'
collect2: error: ld
From: Philippe Mathieu-Daudé
Some VGA adapters do not contain an helpful description,
this can be confusing:
$ qemu-system-arm -M virt -vga help
none
std standard VGA
cirrus Cirrus VGA (default)
vmware VMWare SVGA
xenfb
Add a description
From: Laurent Vivier
Move the dependency from SUBDIR_RULES to SOFTMMU_SUBDIR_RULES
Suggested-by: Paolo Bonzini
Signed-off-by: Laurent Vivier
Message-Id: <20190401141222.30034-5-lviv...@redhat.com>
---
Makefile | 3 ++-
Makefile.objs | 2 +-
2 files changed, 3 insertions(+), 2
Am 15.05.19 um 19:54 schrieb Daniel P. Berrangé:
> On Wed, May 15, 2019 at 07:13:56PM +0200, Stefan Priebe - Profihost AG wrote:
>> Hello list,
>>
>> i've updated my host to kernel 4.19.43 and applied the following patch
>> to my qemu 2.12.1:
>> https://bugzilla.suse.com/attachment.cgi?id=798722
From: Marc-André Lureau
$ ./x86_64-softmmu/qemu-system-x86_64 -sandbox off
qemu-system-x86_64: -sandbox off: There is no option group 'sandbox'
Segmentation fault
Commit 5780760f5e ("seccomp: check TSYNC host capability") wrapped one
use of the sandbox option group to produce a sensible error,
From: Thomas Huth
ps2.c only needs to be compiled if we are building pckbd.c or pl050.c.
Signed-off-by: Thomas Huth
Message-Id: <20190411182240.5957-1-th...@redhat.com>
Tested-by: Philippe Mathieu-Daudé
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Paolo Bonzini
---
hw/input/Kconfig
From: Chen Zhang via Qemu-devel
In target/i386/hvf/hvf.c, a break statement was probably missing in
`hvf_vcpu_exec()`, in handling EXIT_REASON_HLT.
These lines seemed to be equivalent to `kvm_handle_halt()`.
Signed-off-by: Chen Zhang
Message-Id: <087f1d9c-109d-41d1-be2c-ce5d840c9...@me.com>
From: Thomas Huth
In our downstream distribution of QEMU, we'd like to ship the binary
without the multi-serial PCI devices. To make this disablement easier,
let's move the devices into a separate file and add a proper Kconfig-
switch for these devices.
Signed-off-by: Thomas Huth
Message-Id:
Sometimes, 245 fails for me because some stream job has already finished
while the test expects it to still be active. (With -c none, it fails
basically every time.) The most reliable way to fix this is to simply
set auto_finalize=false so the job will remain in the block graph as
long as we need
Crazy stuff. Implement it similar to VECTOR FIND ANY ELEMENT
EQUAL.
Signed-off-by: David Hildenbrand
---
target/s390x/helper.h| 6 ++
target/s390x/insn-data.def | 2 +
target/s390x/translate_vx.inc.c | 37 +++
target/s390x/vec_string_helper.c | 108
On 15.05.19 22:46, David Hildenbrand wrote:
>> +vpmem->vdev = vdev;
>> +vdev->priv = vpmem;
>> +err = init_vq(vpmem);
>> +if (err) {
>> +dev_err(>dev, "failed to initialize virtio pmem vq's\n");
>> +goto out_err;
>> +}
>> +
>> +
From: Wei Yang
The dirty bit is DIRTY_MEMORY_MIGRATION. Correct the comment.
Signed-off-by: Wei Yang
Message-Id: <20190426020927.25470-1-richardw.y...@linux.intel.com>
Signed-off-by: Paolo Bonzini
---
memory.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/memory.c
Do not create an ATI VGA if "-vga none" was passed on the command line.
Cc: BALATON Zoltan
Signed-off-by: Paolo Bonzini
---
hw/mips/mips_fulong2e.c | 10 ++
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c
index
Complicated stuff. Provide two variants, one for the CC and one without
the CC. The CC is returned via cpu_env.
Signed-off-by: David Hildenbrand
---
target/s390x/Makefile.objs | 2 +-
target/s390x/helper.h| 8 +++
target/s390x/insn-data.def | 5 ++
Implement it similar to VECTOR FIND ANY ELEMENT EQUAL.
The zero-check seems to have precedence in case we have
"data1 == data2 == 0". The description in the PoP is a little bi
confusing.
Signed-off-by: David Hildenbrand
---
target/s390x/helper.h| 6
target/s390x/insn-data.def
From: Laurent Vivier
Remove it from the list of tools if --disable-system
and --disable-tools are used as we don't need it for
linux-user targets.
Suggested-by: Paolo Bonzini
[lv: I also disable it with disable-tools, not only with disable-system]
Signed-off-by: Laurent Vivier
Message-Id:
On Tue, 9 Apr 2019 17:58:31 +0200
Eric Auger wrote:
> The code used to assign an interrupt index/subindex to an
> eventfd is duplicated many times. Let's introduce an helper that
> allows to set/unset the signaling for an ACTION_TRIGGER or
> ACTION_UNMASK action.
>
> Signed-off-by: Eric Auger
On Tue, May 14, 2019 at 11:01:42PM +0800, Alex Williamson wrote:
> On Tue, 14 May 2019 09:43:44 +0200
> Erik Skultety wrote:
>
> > On Tue, May 14, 2019 at 03:32:19AM -0400, Yan Zhao wrote:
> > > On Tue, May 14, 2019 at 03:20:40PM +0800, Erik Skultety wrote:
> > > > On Tue, May 14, 2019 at
On Wed, May 15, 2019 at 07:04:24PM +0200, Greg Kurz wrote:
> If a machine is started with ic-mode=xive but the guest only knows
> about XICS, eg. an RHEL 7.6 guest, the kernel panics. This is
> expected but a bit unfortunate since the crash doesn't provide
> much information for the end user to
On Wed, May 15, 2019 at 12:30:07PM +0530, Shivaprasad G Bhat wrote:
> Hi David,
>
> Thanks for the comments. Replies inline..
>
> On 05/14/2019 07:52 AM, David Gibson wrote:
> > On Mon, May 13, 2019 at 04:28:02AM -0500, Shivaprasad G Bhat wrote:
> > > Add support for NVDIMM devices for sPAPR.
On Tue, May 14, 2019 at 02:22:03PM -0600, Alex Williamson wrote:
> On Tue, 14 May 2019 13:03:31 -0600
> Alex Williamson wrote:
>
> > Commit b2fc91db8447 ("q35: set split kernel irqchip as default") changed
> > the default for the pc-q35-4.0 machine type to use split irqchip, which
> > turned out
On Tue, May 14, 2019 at 10:36:17AM +0530, Aravinda Prasad wrote:
>
>
> On Tuesday 14 May 2019 10:10 AM, David Gibson wrote:
> > On Tue, May 14, 2019 at 09:56:41AM +0530, Aravinda Prasad wrote:
> >>
> >>
> >> On Tuesday 14 May 2019 05:38 AM, David Gibson wrote:
> >>> On Mon, May 13, 2019 at
On Fri, May 10, 2019 at 10:30:48AM -0700, Richard Henderson wrote:
> Generating a random number counts as I/O, as it cannot be
> replayed and produce the same results.
>
> Cc: David Gibson
> Suggested-by: Peter Maydell
> Signed-off-by: Richard Henderson
Acked-by: David Gibson
> ---
>
Some RX peripheral using 8bit and 16bit registers.
Added 8bit and 16bit APIs.
Signed-off-by: Yoshinori Sato
Reviewed-by: Richard Henderson
---
include/hw/registerfields.h | 32 +++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git
Signed-off-by: Yoshinori Sato
Tested-by: Philippe Mathieu-Daudé
Using only CONFIG_RX=y:
Reviewed-by: Philippe Mathieu-Daudé
Signed-off-by: Yoshinori Sato
---
configure | 8
default-configs/rx-softmmu.mak | 3 +++
include/sysemu/arch_init.h | 1 +
Hello.
This patch series is added Renesas RX target emulation.
Add "Reviewed-by" for all changes.
My git repository is bellow.
git://git.pf.osdn.net/gitroot/y/ys/ysato/qemu.git tags/rx-20190514
Testing binaries bellow.
u-boot
Download - https://osdn.net/users/ysato/pf/qemu/dl/u-boot.bin.gz
Signed-off-by: Yoshinori Sato
Reviewed-by: Richard Henderson
---
MAINTAINERS | 19 +++
1 file changed, 19 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index a73a61a546..ef6a02702e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -272,6 +272,13 @@ F: include/hw/riscv/
F:
The processor stop status and control register (PSSCR) is used to
control the power saving facilities of the thread. The exit criterion
bit (EC) is used to specify whether the thread should be woken by any
interrupt (EC == 0) or only an interrupt enabled in the LPCR to wake the
thread (EC == 1).
On 10.05.2019 12:46, Gerd Hoffmann wrote:
> Instead of fetching the prebuilt image from patchew download the install
> iso and prepare the image locally. Install to disk, using the serial
> console. Create qemu user, configure ssh login. Install packages
> needed for qemu builds.
>
>
Signed-off-by: Yoshinori Sato
Reviewed-by: Richard Henderson
---
include/qemu/bitops.h | 38 ++
1 file changed, 38 insertions(+)
diff --git a/include/qemu/bitops.h b/include/qemu/bitops.h
index 3f0926cf40..764f9d1ea0 100644
--- a/include/qemu/bitops.h
+++
1 - 100 of 219 matches
Mail list logo
