On 07/09/2013 04:01 AM, Anthony Liguori wrote:
Alexey Kardashevskiy a...@ozlabs.ru writes:
This series spent quite a lot of time waiting when David's PCI series
reaches the upstream but it does not seem to happen soon so I rebased
those on top of agraf/ppc-next rebased on top
Hi, all
The last version is here:
http://lists.gnu.org/archive/html/qemu-devel/2013-05/msg03866.html
Command 'dump-guest-memory' was introduced to dump guest's memory. But the
vmcore's format is only elf32 or elf64. The message is here:
functions are used to write 1st and 2nd dump_bitmap of kdump-compressed format,
which is used to indicate whether the corresponded page is existed in vmcore.
Dump level 1 is chosen, so 1st and 2nd dump_bitmap are same.
Signed-off-by: Qiao Nuohan qiaonuo...@cn.fujitsu.com
Reviewed-by: Zhang Xiaohe
write_elf32_notes/wirte_elf64_notes use fd_write_vmcore to write elf notes to
vmcore. Adding argument WriteCoreDumpFunction f makes it available to choose
the way of writing elf notes when calling these two functions.
Signed-off-by: Qiao Nuohan qiaonuo...@cn.fujitsu.com
Reviewed-by: Zhang Xiaohe
functions are used to write page desc and page data to vmcore.
Signed-off-by: Qiao Nuohan qiaonuo...@cn.fujitsu.com
Reviewed-by: Zhang Xiaohe zhan...@cn.fujitsu.com
---
configure | 50 +
dump.c| 264 +
Function is used to write vmcore. If flag_flatten is specified, flatten format
will be used. In flatten format, data is written block by block in vmcore.
struct MakedumpfileDataHeader is used to indicate the offset and size of a data
block.
struct MakedumpfileDataHeader {
int64_t offset;
flatten format may be used when writing kdump-compressed format. To get more
detailed information about flatten format of kdump-compressed format, please
refer to the following URL:
http://sourceforge.net/projects/makedumpfile/
The two functions here are used to write start flat header and end
DataCache is used to store data temporarily, then the data will be written to
vmcore. These functions will be called later when writing data of page to
vmcore.
Signed-off-by: Qiao Nuohan qiaonuo...@cn.fujitsu.com
Reviewed-by: Zhang Xiaohe zhan...@cn.fujitsu.com
---
dump.c| 52
Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed
format. The command's usage:
dump [-p] protocol [begin] [length] [format]
'format' is used to specified the format of vmcore and can be:
1. 'elf': ELF format, without compression
2. 'kdump-zlib': kdump-compressed
the function can be used by write_elf32_notes/write_elf64_notes. If
fd_write_vmcore is called by write_elf32_notes/write_elf64_notes, elf notes will
be written to vmcore by fd_write_vmcore directly. Instead, buf_write_note will
write elf notes to opaque-note_buf. And the elf notes stored in
09.07.2013 03:18, Kevin O'Connor wrote:
On Mon, Jul 08, 2013 at 05:23:40PM -0400, Cole Robinson wrote:
On 07/07/2013 11:41 PM, Kevin O'Connor wrote:
The 1.7.3 version of SeaBIOS has now been released. For more
information on the release, please see:
Just gave it a spin, breaks booting a
the functions are used to write header of kdump-compressed format to vmcore.
Header of kdump-compressed format includes:
1. common header: DiskDumpHeader32 / DiskDumpHeader64
2. sub header: KdumpSubHeader32 / KdumpSubHeader64
3. extra information: only elf notes here
Signed-off-by: Qiao Nuohan
On 07/09/2013 03:30 PM, Qiao Nuohan wrote:
The last version is here:
http://lists.gnu.org/archive/html/qemu-devel/2013-05/msg03866.html
Hi all,
Still waiting for introspection... And comments about format will be very
helpful.
Thanks!
--
Qiao Nuohan
Ping?
03.07.2013 20:29, Michael Tokarev wrote:
From: Paolo Bonzini pbonz...@redhat.com
With mon:stdio you can exit the VM by switching to the monitor and
sending the quit command. It is then useful to pass Ctrl-C to the
VM instead of exiting.
This in turn lets us stop tying the default
On 07/08/13 21:00, Luiz Capitulino wrote:
On Mon, 8 Jul 2013 18:47:24 +
Seiji Aguchi seiji.agu...@hds.com wrote:
+DEF(msg, HAS_ARG, QEMU_OPTION_msg,
+-msg timestamp[=on|off]\n
+change the format of messages\n
+on|off controls leading
On 07/08/13 20:30, Michael S. Tsirkin wrote:
This patchset moves all generation of ACPI tables
from guest BIOS to the hypervisor.
Doesn't seem to apply on ab8bf290, can you pls rebase and repost?
Thanks
Laszlo
On Tue, Jul 09, 2013 at 09:53:50AM +0200, Laszlo Ersek wrote:
On 07/08/13 20:30, Michael S. Tsirkin wrote:
This patchset moves all generation of ACPI tables
from guest BIOS to the hypervisor.
Doesn't seem to apply on ab8bf290,
This is on top of pci tree for_anthony tag, hopefully
that
On 07/09/13 09:57, Michael S. Tsirkin wrote:
On Tue, Jul 09, 2013 at 09:53:50AM +0200, Laszlo Ersek wrote:
On 07/08/13 20:30, Michael S. Tsirkin wrote:
This patchset moves all generation of ACPI tables
from guest BIOS to the hypervisor.
Doesn't seem to apply on ab8bf290,
This is on top of
This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
To be applied on top of '[PATCH v3 0/3] qapi: Top-level type reference for
command definitions'
qapi-schema.json | 32 ++--
1 file
Am 08.07.2013 um 19:37 hat Luiz Capitulino geschrieben:
On Mon, 1 Jul 2013 16:31:49 +0200
Kevin Wolf kw...@redhat.com wrote:
v2:
- Updated documentation in patch 3
v3:
- Refactored differently (introduced get_expr()) as suggested by Michael
Kevin Wolf (3):
qapi.py: Avoid
On 8 July 2013 20:39, Anthony Liguori aligu...@us.ibm.com wrote:
Peter Maydell peter.mayd...@linaro.org writes:
+void virtio_queue_set_num(VirtIODevice *vdev, int n, int num)
+{
+vdev-vq[n].vring.num = num;
+virtqueue_init(vdev-vq[n]);
I think some level of checking is probably
Am 09.07.2013 09:39, schrieb Michael Tokarev:
Ping?
Have you tested -semihosting? The xtensa test image on the Wiki uses
-nographic, but semihosting content always seems to go to stdout without
going through a chardev IIUC...
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg,
09.07.2013 12:42, Andreas Färber wrote:
Am 09.07.2013 09:39, schrieb Michael Tokarev:
Ping?
Have you tested -semihosting? The xtensa test image on the Wiki uses
-nographic, but semihosting content always seems to go to stdout without
going through a chardev IIUC...
Thanks for the info.
Am 08.07.2013 23:06, schrieb Anthony Liguori:
Alexander Graf ag...@suse.de writes:
On 08.07.2013, at 22:08, Anthony Liguori wrote:
I think we're trying to fit a square peg into a round hole.
virtio-mmio is a virtio transport where each device has a dedicated set
of system resources.
On Tue, Jul 09, 2013 at 01:21:27PM +1000, Alexey Kardashevskiy wrote:
On 07/09/2013 04:50 AM, Anthony Liguori wrote:
+#include hw/hw.h
+#include trace.h
+#include hw/ppc/spapr.h
+#include hw/ppc/xics.h
+#include kvm_ppc.h
+#include qemu/config-file.h
+
+#include sys/ioctl.h
+
On Mon, Jul 08, 2013 at 01:39:26PM -0500, Anthony Liguori wrote:
Alexey Kardashevskiy a...@ozlabs.ru writes:
From: David Gibson da...@gibson.dropbear.id.au
This patch adds the necessary VMStateDescription information to save the
state of PAPR TCE tables (that is, the PAPR specified
On Mon, Jul 08, 2013 at 01:31:59PM -0500, Anthony Liguori wrote:
Alexey Kardashevskiy a...@ozlabs.ru writes:
From: David Gibson da...@gibson.dropbear.id.au
[snip]
void xics_common_cpu_setup(struct icp_state *icp, PowerPCCPU *cpu)
{
CPUState *cs = CPU(cpu);
@@ -523,7 +578,11 @@
The goal of this series is to make QAPI ready to handle mostly unions in a less
verbose way so that a future -blockdev command line option can be a
direct mapping of the structure used by a blockdev-add QMP command. This
series implements everything that I think is needed for this on the QAPI
Signed-off-by: Kevin Wolf kw...@redhat.com
---
scripts/qapi-types.py | 19 +--
1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/scripts/qapi-types.py b/scripts/qapi-types.py
index ddcfed9..e1239e1 100644
--- a/scripts/qapi-types.py
+++ b/scripts/qapi-types.py
@@
The new 'base' key in a union definition refers to a struct type, which
is inlined into the union definition and can represent fields common to
all kinds.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
scripts/qapi-types.py | 20 ++--
1 file changed, 18 insertions(+), 2
Signed-off-by: Kevin Wolf kw...@redhat.com
---
include/qapi/qmp/qdict.h | 1 +
qobject/qdict.c | 47 +++
2 files changed, 48 insertions(+)
diff --git a/include/qapi/qmp/qdict.h b/include/qapi/qmp/qdict.h
index 685b2e3..b261570 100644
---
These can be used when an embedded struct is parsed and members not
belonging to the struct may be present in the input (parsing flat
namespect QMP union with discriminator)
Signed-off-by: Kevin Wolf kw...@redhat.com
---
include/qapi/visitor-impl.h | 4
include/qapi/visitor.h | 3 +++
The discriminator for anonymous unions is the data type. This allows to
have a union type that allows both of these:
{ 'file': 'my_existing_block_device_id' }
{ 'file': { 'filename': '/tmp/mydisk.qcow2', 'read-only': true } }
Unions like this are specified in the schema with an empty
Instead of the rather verbose syntax that distinguishes base and
subclass fields...
{ type: file,
read-only: true,
data: {
filename: test
} }
...we can now have both in the same namespace, allowing a more direct
mapping of the command line, and moving fields between the
This is traditionally -drive format=..., which is now translated into
the new driver option. This gives us a more consistent way to select the
driver of BlockDriverStates that can be used in QMP context, too.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
block.c| 7 +++
blockdev.c | 20
This allows to just look at the next element without actually consuming
it.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
qapi/qmp-input-visitor.c | 19 ++-
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/qapi/qmp-input-visitor.c b/qapi/qmp-input-visitor.c
index
This is just a quick hack to test things
Signed-off-by: Kevin Wolf kw...@redhat.com
---
blockdev.c | 32
qapi-schema.json | 29 +
qmp-commands.hx | 6 ++
3 files changed, 67 insertions(+)
diff --git a/blockdev.c
Signed-off-by: Kevin Wolf kw...@redhat.com
---
scripts/qapi-visit.py | 62 ---
1 file changed, 34 insertions(+), 28 deletions(-)
diff --git a/scripts/qapi-visit.py b/scripts/qapi-visit.py
index 6cac05a..a337d80 100644
--- a/scripts/qapi-visit.py
Signed-off-by: Kevin Wolf kw...@redhat.com
---
scripts/qapi-visit.py | 33 -
1 file changed, 28 insertions(+), 5 deletions(-)
diff --git a/scripts/qapi-visit.py b/scripts/qapi-visit.py
index a337d80..3b2e693 100644
--- a/scripts/qapi-visit.py
+++
On Mon, 8 Jul 2013, Anthony Liguori wrote:
Stefano Stabellini stefano.stabell...@eu.citrix.com writes:
On Mon, 8 Jul 2013, Anthony Liguori wrote:
Andreas Färber afaer...@suse.de writes:
Right, it goes:
1) Acked-by:
I haven't reviewed the code in detail but the general idea
On Mon, Jul 08, 2013 at 09:44:04AM +0100, Peter Maydell wrote:
Commit e3127ae0 introduced a problem where we're passing a
hwaddr* to qemu_ram_ptr_length() but it wants a ram_addr_t*;
this will cause problems on 32 bit hosts and in any case
provokes a clang warning on MacOSX:
Bumped into this
On Tue, Jul 9, 2013 at 12:42 PM, Andreas Färber afaer...@suse.de wrote:
Am 09.07.2013 09:39, schrieb Michael Tokarev:
Ping?
Have you tested -semihosting? The xtensa test image on the Wiki uses
-nographic, but semihosting content always seems to go to stdout without
going through a chardev
Hi Max,
Am 09.07.2013 13:00, schrieb Max Filippov:
On Tue, Jul 9, 2013 at 12:42 PM, Andreas Färber afaer...@suse.de wrote:
Am 09.07.2013 09:39, schrieb Michael Tokarev:
Ping?
Have you tested -semihosting? The xtensa test image on the Wiki uses
-nographic, but semihosting content always
Hi,
here's again my proposal for adapter (thin) interrupt support for virtio-ccw
devices, originally posted at
http://marc.info/?l=linux-virtualizationm=137060143904927w=2
The document is unchanged, only rebased against current master.
Cornelia Huck (1):
virtio-ccw: Document adapter
Signed-off-by: Cornelia Huck cornelia.h...@de.ibm.com
---
virtio-spec.lyx | 147 +--
1 file changed, 144 insertions(+), 3 deletions(-)
diff --git a/virtio-spec.lyx b/virtio-spec.lyx
index c920155..4729766 100644
--- a/virtio-spec.lyx
+++
Hi,
next version of the guest exploitation of virtio-ccw adapter interrupts.
Changes from the last version:
- adapt to latest kvm-next
- changed housekeeping for indicator locations: we now use cacheline-sized
and aligned areas
- minor tweaks
Cornelia Huck (2):
KVM: s390: virtio-ccw:
Hi,
here's the current implementation of virtio-ccw adapter interrupts in qemu.
Code is unchanged, only rebased against current master.
Cornelia Huck (1):
s390/virtio-ccw: Adapter interrupt support.
hw/s390x/css.c| 10
hw/s390x/css.h|2 ++
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host-guest notifications will be handled
via global_indicator - queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators for virtqueues may be present at an
offset.
Implement the new CCW_CMD_SET_IND_ADAPTER command and try to enable
adapter interrupts for every device on the first startup. If the host
does not support adapter interrupts, fall back to normal I/O interrupts.
virtio-ccw adapter interrupts use the same isc as normal I/O subchannels
and share a
A command reject for a ccw may happen if we run on a host not supporting
a certain feature. We want to be able to handle this as special case of
command failure, so let's split this off from the generic -EIO error code.
Signed-off-by: Cornelia Huck cornelia.h...@de.ibm.com
---
On 07/09/2013 02:05 AM, Kevin Wolf wrote:
This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
To be applied on top of '[PATCH v3 0/3] qapi: Top-level type reference for
command definitions'
On Tue, 07/09 10:05, Kevin Wolf wrote:
This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
To be applied on top of '[PATCH v3 0/3] qapi: Top-level type reference for
command definitions'
09.07.2013 12:42, Andreas Färber wrote:
Am 09.07.2013 09:39, schrieb Michael Tokarev:
Ping?
Have you tested -semihosting? The xtensa test image on the Wiki uses
-nographic, but semihosting content always seems to go to stdout without
going through a chardev IIUC...
Ok. I tried the xtensa
Am 09.07.2013 um 13:58 hat Fam Zheng geschrieben:
On Tue, 07/09 10:05, Kevin Wolf wrote:
This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
To be applied on top of '[PATCH v3 0/3] qapi: Top-level
On 07/09/2013 05:58 AM, Fam Zheng wrote:
On Tue, 07/09 10:05, Kevin Wolf wrote:
This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
+++ b/qapi-schema.json
@@ -1791,42 +1791,14 @@
# The operation can be
On 07/09/2013 06:04 AM, Kevin Wolf wrote:
and these still duplication of those comments for type declaration?
No, the DriveBackup documentation doesn't describe what the command does
or what it returns. You might argue that it should be there, but I think
that's out of scope for this patch
Am 09.07.2013 um 14:09 hat Eric Blake geschrieben:
On 07/09/2013 06:04 AM, Kevin Wolf wrote:
and these still duplication of those comments for type declaration?
No, the DriveBackup documentation doesn't describe what the command does
or what it returns. You might argue that it should be
On 07/08/2013 09:11 PM, Dave Airlie wrote:
On Tue, Jul 9, 2013 at 10:35 AM, Dave Airlie airl...@gmail.com wrote:
Hi,
F19
kernel-3.9.8-300.fc19.x86_64
qemu-kvm-1.4.2-4.fc19.x86_64
If I start a complete F19 install in the guest and send the qemu
process a SEGV signal, the host kernel starts
On 9 July 2013 13:02, Michael Tokarev m...@tls.msk.ru wrote:
09.07.2013 12:42, Andreas Färber wrote:
Am 09.07.2013 09:39, schrieb Michael Tokarev:
Ping?
Have you tested -semihosting? The xtensa test image on the Wiki uses
-nographic, but semihosting content always seems to go to stdout
Am 09.07.2013 14:37, schrieb Peter Maydell:
On 9 July 2013 13:02, Michael Tokarev m...@tls.msk.ru wrote:
09.07.2013 12:42, Andreas Färber wrote:
Am 09.07.2013 09:39, schrieb Michael Tokarev:
Ping?
Have you tested -semihosting? The xtensa test image on the Wiki uses
-nographic, but
On Tue, 07/09 06:07, Eric Blake wrote:
On 07/09/2013 05:58 AM, Fam Zheng wrote:
On Tue, 07/09 10:05, Kevin Wolf wrote:
This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf kw...@redhat.com
---
+++ b/qapi-schema.json
On 9 July 2013 13:40, Andreas Färber afaer...@suse.de wrote:
The way I interpreted it (without having tested it yet) is that we would
not be able to use Ctrl+C in -semihosting mode, no? At least that's how
-display none is like today IIRC.
I don't think anybody expects ctrl-C to interact with
The A15 Versatile Express board can remap a variety of things at address
0. We don't currently emulate the Serial Configuration Controller which
is how the guest can control this remapping, but we can provide the
initial default mapping of the first flash device into this space.
In particular this
On 07/08/2013 08:41 PM, Kevin O'Connor wrote:
On Mon, Jul 08, 2013 at 08:18:42PM -0400, Cole Robinson wrote:
On 07/08/2013 07:18 PM, Kevin O'Connor wrote:
On Mon, Jul 08, 2013 at 05:23:40PM -0400, Cole Robinson wrote:
On 07/07/2013 11:41 PM, Kevin O'Connor wrote:
The 1.7.3 version of SeaBIOS
Thanks Stefanha.
If we use the commad virsh attach-disk rhel64-64 /home/images/virtio-
scsi11.img --persistent sdr --cache writethrough the qcow2 images will
also gets added as raw which is by default. Hence we should use
virsh attach-disk rhel64-64 /home/images/virtio-scsi11.img --persistent
09.07.2013 16:40, Andreas Färber wrote:
The way I interpreted it (without having tested it yet) is that we would
not be able to use Ctrl+C in -semihosting mode, no? At least that's how
-display none is like today IIRC.
With -display none qemu terminates when you hit Ctrl+C, with or
without the
On 09/07/13 13:34, Cornelia Huck wrote:
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host-guest notifications will be handled
via global_indicator - queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators
On Mon, 08 Jul 2013 02:42:32 +0200
Andreas Färber afaer...@suse.de wrote:
Am 08.07.2013 01:10, schrieb Juan Quintela:
Please, send any topic that you are interested in covering.
Static qdev vs. dynamic QOM properties and -global
(Igor's topic from two weeks ago that we couldn't cover any
On Tue, 9 Jul 2013 10:05:35 +0200
Kevin Wolf kw...@redhat.com wrote:
This removes duplicated definitions and documentation by reusing the
existing data type.
Signed-off-by: Kevin Wolf kw...@redhat.com
Applied to the qmp branch, thanks.
---
To be applied on top of '[PATCH v3 0/3] qapi:
On Tue, 09 Jul 2013 15:27:14 +0200
Christian Borntraeger borntrae...@de.ibm.com wrote:
On 09/07/13 13:34, Cornelia Huck wrote:
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host-guest notifications will be handled
via
On Mon, Jul 8, 2013 at 9:11 PM, Dave Airlie airl...@gmail.com wrote:
On Tue, Jul 9, 2013 at 10:35 AM, Dave Airlie airl...@gmail.com wrote:
Hi,
F19
kernel-3.9.8-300.fc19.x86_64
qemu-kvm-1.4.2-4.fc19.x86_64
If I start a complete F19 install in the guest and send the qemu
process a SEGV
Hi,
It seems this is a old question, but I couldn't get a exact answer
via historical mails: How to assign vhba to guest now? It'll be much
appreciated if exact xml format/qemu commandcan be showed.
And, it seems that persistent vhba hasn't been supported by libvirt,
yes?
Thanks,
Ren
You could pass cur_mon to readline_completion() in readline_handle_byte()
to avoid all this, but it would be preferable to clarify the matter.
This is also another benefit of having readline_completion() in a
different patch, you can (and should!) clarify this point in the commit
log along
On 3 July 2013 17:29, Michael Tokarev m...@tls.msk.ru wrote:
+When monitor is multiplexed to stdio this way, Ctrl+C will not terminate
+QEMU anymore but will be passed to the guest instead.
the monitor, in this way, any more.
Otherwise
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
-- PMM
sasldblistusers2 doesn't have a '-a' option
Signed-off-by: Cole Robinson crobi...@redhat.com
---
qemu.sasl | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/qemu.sasl b/qemu.sasl
index cf19cf8..9dc8323 100644
--- a/qemu.sasl
+++ b/qemu.sasl
@@ -26,7 +26,7 @@ keytab:
On 3 July 2013 17:29, Michael Tokarev m...@tls.msk.ru wrote:
It looks like initially there was -nographic option to turn
off display, now there's another option of the same sort,
-display none. But code in other places of qemu checks for
DT_NOGRAPHIC and does not work well with -display none.
On Tue, 09 Jul 2013 22:03:42 +0800
Wenchao Xia xiaw...@linux.vnet.ibm.com wrote:
You could pass cur_mon to readline_completion() in readline_handle_byte()
to avoid all this, but it would be preferable to clarify the matter.
This is also another benefit of having readline_completion() in
Alexey Kardashevskiy a...@ozlabs.ru writes:
On 07/09/2013 04:29 AM, Anthony Liguori wrote:
Alexey Kardashevskiy a...@ozlabs.ru writes:
From: David Gibson da...@gibson.dropbear.id.au
The savevm code for the powerpc cpu emulation is currently based around
the old register_savevm() rather
The following changes since commit dc11549ec213f85f6a024c7df68d349464cd1688:
Merge remote-tracking branch 'mst/tags/for_anthony' into staging (2013-07-08
08:00:23 -0500)
are available in the git repository at:
git://github.com/rth7680/qemu.git tcg-next
for you to fetch changes up to
Expand the definition of not present to include should not be present.
This means we can simplify the logic surrounding the generic tcg opcodes
for which the host backend ought not be providing definitions.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/arm/tcg-target.c | 14 --
tcg/arm/tcg-target.h | 3 +--
2 files changed, 1 insertion(+), 16 deletions(-)
diff --git a/tcg/arm/tcg-target.c b/tcg/arm/tcg-target.c
index
There are several hosts with only a div insn. Remainder is computed
manually from the quotient and inputs. We can do this generically.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/aarch64/tcg-target.h | 2 ++
As it really controls the availability of a thumb interworking
instruction on armv5t.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/arm/tcg-target.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git
This allows TCG_TARGET_HAS_* to be a variable rather than a constant,
which allows easier support for differing ISA levels for the host.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/tcg-opc.h | 2 +-
1 file changed, 1 insertion(+),
We can now detect and use divide instructions at runtime, rather than
having to restrict their availability to compile-time.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/arm/tcg-target.c | 16 ++--
tcg/arm/tcg-target.h
Reviewed-by: Andreas Färber afaer...@suse.de
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/ppc64/tcg-target.c | 26 --
tcg/ppc64/tcg-target.h | 4 ++--
2 files changed, 2 insertions(+), 28 deletions(-)
diff --git a/tcg/ppc64/tcg-target.c
I don't think the debugger actually looks at this for anything,
using the correct .debug_frame contents, but might as well get
it all correct.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/tcg.c | 4 ++--
1 file changed, 2
Allows unwinding past the code_gen_buffer.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/arm/tcg-target.c | 76 +---
1 file changed, 67 insertions(+), 9 deletions(-)
diff --git
Reviewed-by: Andreas Färber afaer...@suse.de
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/ppc/tcg-target.c | 14 --
tcg/ppc/tcg-target.h | 2 +-
2 files changed, 1 insertion(+), 15 deletions(-)
diff --git a/tcg/ppc/tcg-target.c b/tcg/ppc/tcg-target.c
index
09.07.2013 18:04, Peter Maydell wrote:
On 3 July 2013 17:29, Michael Tokarev m...@tls.msk.ru wrote:
+When monitor is multiplexed to stdio this way, Ctrl+C will not terminate
+QEMU anymore but will be passed to the guest instead.
the monitor, in this way, any more.
Grr. This is 3rd change
These will necessarily be the same layout for all hosts. This limits
the amount of boilerplate required to implement jit debug for a host.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/hppa/tcg-target.c | 35
We can check the condition at compile time, rather than run time.
Reviewed-by: Andreas Färber afaer...@suse.de
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/i386/tcg-target.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tcg/i386/tcg-target.c
Ping for KVM call discussion
Am 03.10.2012 19:48, schrieb Eduardo Habkost:
Summary:
- Object properties are registered by the classes' instance_init()
functions
- qdev_prop_set_globals() needs all properties to be registered before being
called.
- Hence, qdev_prop_set_globals()
Alexey Kardashevskiy a...@ozlabs.ru writes:
This series spent quite a lot of time waiting when David's PCI series
reaches the upstream but it does not seem to happen soon so I rebased
those on top of agraf/ppc-next rebased on top qemu.org/master.
While this series applies and compiles, the
Benjamin Herrenschmidt b...@kernel.crashing.org writes:
On Tue, 2013-07-09 at 13:40 +1000, Alexey Kardashevskiy wrote:
No, why? It is a per CPU state of XICS controller, never exists apart
from XICS.
ICP is. ICS is ... different but can mostly be considered to be the
XICS itself.
On Tue, Jul 09, 2013 at 09:06:21AM -0500, Anthony Liguori wrote:
David Gibson da...@gibson.dropbear.id.au writes:
On Mon, Jul 08, 2013 at 01:27:05PM -0500, Anthony Liguori wrote:
Alexey Kardashevskiy a...@ozlabs.ru writes:
From: David Gibson da...@gibson.dropbear.id.au
The
With this we can generate armv7 insns even when the OS compiles for a
lower common denominator. The macros are arranged so that when we do
compile for a given ISA, all of the runtime checks for that ISA are
optimized away.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by:
GCC 4.8 defines a handy __ARM_ARCH symbol that we can use, which
will make us nicely forward compatible with ARMv8 AArch32.
Reviewed-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
tcg/arm/tcg-target.c | 62
Acked-by: Peter Maydell peter.mayd...@linaro.org
Signed-off-by: Richard Henderson r...@twiddle.net
---
MAINTAINERS | 1 +
1 file changed, 1 insertion(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 780f480..93ad19d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -781,6 +781,7 @@ Tiny Code
On Tue, Jul 09, 2013 at 09:08:01AM -0500, Anthony Liguori wrote:
Alexey Kardashevskiy a...@ozlabs.ru writes:
On 07/09/2013 04:29 AM, Anthony Liguori wrote:
Alexey Kardashevskiy a...@ozlabs.ru writes:
[snip]
+#endif /* TARGET_PPC64 */
+.vmsd = vmstate_tlb6xx,
+
1 - 100 of 195 matches
Mail list logo
