24.05.2014 10:38, Michael Tokarev wrote:
> [...]
> if (tx_desc_get_last(desc)) {
> +unsigneddesc_first[2];
> +
> /* Modify the 1st descriptor of this packet to be owned by
> * the processor.
> */
> cpu_physical_memory_re
[...]
if (tx_desc_get_last(desc)) {
+unsigneddesc_first[2];
+
/* Modify the 1st descriptor of this packet to be owned by
* the processor.
*/
cpu_physical_memory_read(s->tx_desc_addr,
-
On Mon, May 19, 2014 at 1:56 PM, Mark Cave-Ayland
wrote:
> On 18/05/14 17:06, Olivier Danet wrote:
>
>> The problem may be related to the fact that the 32bits SPARCv8 and 64bits
>> SPARCv9 work in opposite directions !
>>
>> SparcV9 standard, page 360/399 :
>> The SPARC-V9 CWP register is incremen
24.05.2014 10:01, Le Tan пишет:
> I will fix the whitespace issues and resend this series with a new
> version later.
Please note, once again: I applied (with fixups) other 3 your patches,
so there's no need to resend those 3.
This one, besides a whitespace problem, needs an ACK from block subsys
I will fix the whitespace issues and resend this series with a new
version later.
Thanks very much! ;)
Le
2014-05-24 4:27 GMT+08:00 Michael Tokarev :
> 21.05.2014 04:10, Le Tan wrote:
>> Replace fprintf(stderr,...) with error_report() in files block/*, block.c,
>> block-migration.c and blockdev.c
24.05.2014 09:41, Le Tan wrote:
> There is a newer version of patch to fix this problem. I forgot to add
> the version number when I sent the new patch. Add this comment just to
> indicate that this patch should be dropped. :)
I've already applied your v2 to the trivial tree, and I told you
just t
There is a newer version of patch to fix this problem. I forgot to add
the version number when I sent the new patch. Add this comment just to
indicate that this patch should be dropped. :)
2014-05-10 21:18 GMT+08:00 Peter Crosthwaite :
> On Sat, May 10, 2014 at 9:55 AM, Le Tan wrote:
>> Replace f
Used QEMU this morning, noticed mce error in log, searched, found this.
* model name: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz (it's a Haswell)
* kernel 3.14.4-gentoo
* app-emulation/qemu-1.6.1
* qemu-system-i386 -enable-kvm andsoon
* [73468.545378] mce: [Hardware Error]: Machine check events log
Without the mask, control bits are passed on in the keycode, generating
incorrect PS/2 sequences when SHIFT, ALT, etc are held down.
Signed-off-by: Andrew Oates
---
ui/curses.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/ui/curses.c b/ui/curses.c
index b044790..de85f7
There is a newer version of patch to fix this problem. I forgot to add
the version number when I sent the new patch. Add this comment just to
indicate that this patch should be dropped. :)
2014-05-10 7:55 GMT+08:00 Le Tan :
> Replace fprintf(stderr,...) with error_report() in the file
> arch_init.
On 05/24/2014 07:15 AM, Alexander Graf wrote:
>
> On 23.05.14 18:16, Alexey Kardashevskiy wrote:
>> On 05/23/2014 10:05 PM, Alexander Graf wrote:
>>> On 23.05.14 14:03, Alexey Kardashevskiy wrote:
On 05/23/2014 09:28 PM, Alexander Graf wrote:
> On 23.05.14 06:59, Alexey Kardashevskiy wrot
Ping^2!
I'll try trivial queue too :)
Regards,
Peter
On Wed, May 14, 2014 at 11:17 PM, Peter Crosthwaite
wrote:
> Ping!
>
> On Wed, May 7, 2014 at 9:15 AM, Peter Crosthwaite
> wrote:
>>
>> Hi Stefan, Peter,
>>
>> Found a bug in the Cadence GEM. Fixed in P1. Have some follow us trivials
>> as w
W dniu 2014-05-23 15:14, Marcin Gibuła pisze:
bdrv_requests_pending(), called by bdrv_requests_pending_all(), is the
function that determines for each of the disks in your VM if it still
has requests in flight that need to be completed. This function must
have returned true even though there is n
Il 23/05/2014 15:35, Markus Armbruster ha scritto:
Luiz Capitulino writes:
On Fri, 23 May 2014 00:50:38 -0300
Marcelo Tosatti wrote:
Then the guest triggers an RTC update, so qemu sends an event, but the
event is lost. Then libvirtd starts again, and doesn't realize the
event is lost.
Yes
10.05.2014 03:55, Le Tan wrote:
> Replace fprintf(stderr,...) with error_report() in files bsd-user/*.
> The trailing "\n"s of the @fmt argument have been removed
> because @fmt of error_report() should not contain newline.
I'd fix two issues in there:
...
> default:
> pc =
On 23.05.14 18:16, Alexey Kardashevskiy wrote:
On 05/23/2014 10:05 PM, Alexander Graf wrote:
On 23.05.14 14:03, Alexey Kardashevskiy wrote:
On 05/23/2014 09:28 PM, Alexander Graf wrote:
On 23.05.14 06:59, Alexey Kardashevskiy wrote:
From: David Gibson
The only model so far supported for VF
Am 23.05.2014 12:36, schrieb Peter Maydell:
> On 17 May 2014 09:34, Stefan Weil wrote:
>> Commit 5a007547df76446ab891df93ebc55749716609bf tried to fix a
>> performance degradation caused by bad handling of small timeouts
>> in the original implementation of g_poll.
>>
>> Since that commit, hard di
10.05.2014 03:55, Le Tan wrote:
> Replace fprintf(stderr,...) with error_report() in files audio/*.
> The trailing "\n"s of the @fmt argument have been removed
> because @fmt of error_report() should not contain newline.
Please always check your patches using ./scripts/checkpatch.pl.
I've applied
On Fri, May 23, 2014 at 12:00:12PM +0300, Michael S. Tsirkin wrote:
> > 1. There's a fairly complex setup (create a boot disk, start the
> > guest, loop around waiting for the bios to finish booting, watch
> > when your disk-based boot loader runs, etc.) before starting to
> > examine the guest mem
So, should we apply this or not? It's been waiting for quite some time,
and during this time we've found a very good example of why it should
be applied (I think anyway).
Thanks,
/mjt
12.05.2014 13:20, Markus Armbruster wrote:
> Michael Tokarev writes:
>
>> 11.05.2014 11:58, Alon Levy wrote:
The currrent code in libcacard/vcard_emul_nss.c:vcard_emul_options()
has a weird bug in variable usage around expanding opts->vreader
array.
There's a helper variable, vreaderOpt, which is first needlessly
initialized to NULL, next, conditionally, only we have to expand
opts->vreader, receives arr
23.05.2014 22:20, Michael Tokarev wrote:
> 23.05.2014 15:24, Markus Armbruster wrote:
>> Makes Coverity happy with libcacard/ (for now).
>>
>> v2:
>> - Fix g_new() vs. g_renew() mistake in PATCH 5 [Michael Tokarev]
>> - Trivially rebased
>
>> Markus Armbruster (7):
>> libcacard/vscclient: Bury s
06.05.2014 15:15, Dr. David Alan Gilbert (git) wrote:
> From: "Dr. David Alan Gilbert"
>
> The 'name' option silently failed when used in config files
> ( http://lists.gnu.org/archive/html/qemu-devel/2014-04/msg00378.html )
>
> Signed-off-by: Dr. David Alan Gilbert
> Reported-by: William Dauchy
23.05.2014 20:07, Peter Maydell wrote:
> When libtool support was added to configure, the new temporary files
> were left out of the list of files cleaned up on exit; this results
> in a lot of stale .lo files being left around in /tmp. Worse, libtool
> creates a /tmp/.libs directory which we can't
23.05.2014 07:44, Jules Wang wrote:
> Calling dma_bdrv_unmap() twice is not necessary and may cause
> potential problems if some code changes.
>
> Signed-off-by: Jules Wang
> ---
> dma-helpers.c |2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/dma-helpers.c b/dma-h
21.05.2014 04:10, Le Tan wrote:
> Replace fprintf(stderr,...) with error_report() in files block/*, block.c,
> block-migration.c and blockdev.c. The trailing "\n"s of the @fmt argument
> have been removed because @fmt of error_report() should not contain newline.
>
> Signed-off-by: Le Tan
> ---
>
21.05.2014 04:10, Le Tan wrote:
> Replace fprintf(stderr,...) with error_report() in the file
> arch_init.c. The trailing "\n"s of the @fmt argument have been removed
> because @fmt of error_report() should not contain newline.
Applied to -trivial queue. Thank you for the work!
/mjt
22.05.2014 15:33, Saravanakumar wrote:
> Move dereferencing of root only after verifying valid root pointer.
Applied to -trivial, after removing duplicate commit comment.
Thank you!
/mjt
Applied to -trivial queue, thank you!
/mjt
On 05/23/2014 12:46 PM, Paolo Bonzini wrote:
>> @@ -166,11 +166,18 @@ static void tcg_opt_gen_mov(TCGContext *s, int
>> op_index, TCGArg *gen_args,
>> TCGOpcode old_op, TCGArg dst, TCGArg src)
>> {
>> TCGOpcode new_op = op_to_mov(old_op);
>> +tcg_target_ulong
Il 23/05/2014 20:57, Richard Henderson ha scritto:
For a 64-bit host, the high bits of a register after a 32-bit operation
are undefined. Adjust the temps mask for all 32-bit ops to reflect that.
Signed-off-by: Richard Henderson
---
tcg/optimize.c | 33 ++---
1 fil
Il 23/05/2014 21:15, Richard Henderson ha scritto:
Ping?
I reviewed most of it, will try to finish it in the weekend.
r~
On 05/14/2014 12:17 AM, Richard Henderson wrote:
Obviously the most important part here is the ldst updates,
but there are all sorts of opportunities for improvement in
t
Ping?
r~
On 05/14/2014 12:17 AM, Richard Henderson wrote:
> Obviously the most important part here is the ldst updates,
> but there are all sorts of opportunities for improvement in
> this backend.
>
>
> r~
>
>
> Richard Henderson (24):
> tcg-mips: Layout executable and code_gen_buffer
>
A bug reported by Hartmut Penner visible on s390 host and ppc64 guest:
IN:
0x001ff378: lwz r3,436(r7)
0x001ff37c: lis r0,-17874
0x001ff380: ori r0,r0,35747
0x001ff384: mulhwu r4,r3,r0
0x001ff388: rlwinm r5,r4,29,3,31
0x001ff38c: r
No functional change, just reduce a bit of redundancy.
Signed-off-by: Richard Henderson
---
tcg/optimize.c | 117 +++--
1 file changed, 56 insertions(+), 61 deletions(-)
diff --git a/tcg/optimize.c b/tcg/optimize.c
index 3a504a1..83e1387 10064
For a 64-bit host, the high bits of a register after a 32-bit operation
are undefined. Adjust the temps mask for all 32-bit ops to reflect that.
Signed-off-by: Richard Henderson
---
tcg/optimize.c | 33 ++---
1 file changed, 26 insertions(+), 7 deletions(-)
diff --g
On 05/23/2014 05:54 PM, Eric Blake wrote:
> On 05/23/2014 04:19 AM, Laine Stump wrote:
>> On 05/23/2014 12:17 PM, Laine Stump wrote:
>>> *However*, this discussion forced me to investigate some of the basic
>>> assumptions that I'd been making when coming in to fix this bug. In
>>> particular, my a
On 05/23/2014 08:54 AM, Eric Blake wrote:
> For this to work, a
> persistent guest definition needs to record the offset that was in use
> at the time the guest powered off, and the next time qemu is started,
> pass _that_ offset as the command-line offset against UTC. In libvirt's
> case, we i
23.05.2014 15:24, Markus Armbruster wrote:
> Makes Coverity happy with libcacard/ (for now).
>
> v2:
> - Fix g_new() vs. g_renew() mistake in PATCH 5 [Michael Tokarev]
> - Trivially rebased
> Markus Armbruster (7):
> libcacard/vscclient: Bury some dead code
> libcacard: Plug memory leaks arou
23.05.2014 22:16, Michael Tokarev пишет:
> 23.05.2014 22:09, Michael Tokarev wrote:
>> 23.05.2014 15:24, Markus Armbruster wrote:
>>> It's not locally obvious, and Coverity can't see it either.
>>>
>>> Signed-off-by: Markus Armbruster
>>> Reviewed-by: Alon Levy
>>> ---
>>> libcacard/vcard_emul_n
23.05.2014 22:09, Michael Tokarev wrote:
> 23.05.2014 15:24, Markus Armbruster wrote:
>> It's not locally obvious, and Coverity can't see it either.
>>
>> Signed-off-by: Markus Armbruster
>> Reviewed-by: Alon Levy
>> ---
>> libcacard/vcard_emul_nss.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>
Il 23/05/2014 19:59, Peter Maydell ha scritto:
On 2 May 2014 15:33, Paolo Bonzini wrote:
On the x86, some devices need access to the CPU reset pin (INIT#).
Provide a generic service to do this, using one of the internal
cpu_interrupt targets. Generalize the PPC-specific code for
CPU_INTERRUPT_
23.05.2014 15:24, Markus Armbruster пишет:
> It's not locally obvious, and Coverity can't see it either.
>
> Signed-off-by: Markus Armbruster
> Reviewed-by: Alon Levy
> ---
> libcacard/vcard_emul_nss.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/libcacard/vcard_emul_nss.c b/libcac
Broken since dddbb2e1e3f8137d7e3f1faf9758c66cca0c94ea.
Do all the rest of the things that tcg_out_op did before
and after the big switch statement.
Signed-off-by: Richard Henderson
---
tcg/tci/tcg-target.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tcg/tci/tcg-target.c b/tcg/tci/tcg-
My fault; sorry about the breakage.
r~
The following changes since commit 5118dc5975e6aa2e823961e15b162919f94721cc:
Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-5' into staging
(2014-05-22 17:05:36 +0100)
are available in the git repository at:
git://github.com/rth7680/
On 2 May 2014 15:33, Paolo Bonzini wrote:
> On the x86, some devices need access to the CPU reset pin (INIT#).
> Provide a generic service to do this, using one of the internal
> cpu_interrupt targets. Generalize the PPC-specific code for
> CPU_INTERRUPT_RESET to other targets.
>
> Since PPC does
Il 23/05/2014 18:21, Peter Maydell ha scritto:
On 23 May 2014 15:33, Paolo Bonzini wrote:
Il 23/05/2014 13:50, Peter Maydell ha scritto:
On 23 May 2014 12:23, Andreas Färber wrote:
Am 23.05.2014 13:13, schrieb Peter Maydell:
Ping?
I believe I remarked that in the example
typedef struct Fo
Il 23/05/2014 18:07, Stefano Stabellini ha scritto:
Choose pc-i440fx-1.6 instead of pc for HVM guests, so that we know for
sure what is the machine that we are emulating.
Use pc-i440fx-1.6 regardless of the xen_platform_pci option. Add the
xen-platform device if requested. Choose slot 2 for the
From: Fam Zheng
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g
On Fri, May 23, 2014 at 08:54:54AM -0600, Eric Blake wrote:
> On 05/23/2014 04:19 AM, Laine Stump wrote:
> > On 05/23/2014 12:17 PM, Laine Stump wrote:
> >> *However*, this discussion forced me to investigate some of the basic
> >> assumptions that I'd been making when coming in to fix this bug. In
From: Markus Armbruster
qerror_report_err() is a transitional interface to help with
converting existing HMP commands to QMP. It should not be used
elsewhere.
drive_init() is not meant to be used by QMP commands. It uses both
qerror_report_err() and error_report(). Convert the former to the
l
From: Maria Kustova
The 'refcount_bits' term used in the description of refcount block entry is
not defined in the specification. The definition is added in the
'refcount_order' section where refcount_bits was used as 'width in bits'.
Signed-off-by: Maria Kustova
Reviewed-by: Eric Blake
Signed
If you see a pending request on a RADOS block device (rbd) then it would
be good to dig deeper into QEMU's block/rbd.c driver to see why it's not
completing that request.
Are you using qcow2 on top of rbd?
Hi,
I've already recreated this without rbd and with stock qemu 2.0.
--
mg
On 23 May 2014 15:33, Paolo Bonzini wrote:
> Il 23/05/2014 13:50, Peter Maydell ha scritto:
>> On 23 May 2014 12:23, Andreas Färber wrote:
>>> Am 23.05.2014 13:13, schrieb Peter Maydell:
Ping?
>>>
>>> I believe I remarked that in the example
>>> typedef struct Foo {
>>> would be more in line
From: Markus Armbruster
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
Replace by error_report().
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
qemu-nbd.c | 6 ++
On 05/23/2014 10:05 PM, Alexander Graf wrote:
>
> On 23.05.14 14:03, Alexey Kardashevskiy wrote:
>> On 05/23/2014 09:28 PM, Alexander Graf wrote:
>>> On 23.05.14 06:59, Alexey Kardashevskiy wrote:
From: David Gibson
The only model so far supported for VFIO passthrough devices is th
In the MacOSX specific code in raw-posix.c we use the define
LONG_LONG_MAX. This is actually a non-standard pre-C99 define;
switch to using the standard LLONG_MAX instead.
This apparently fixes a compilation failure with certain
compiler/OS versions (though it is unclear which).
Reported-by: Pete
Choose pc-i440fx-1.6 instead of pc for HVM guests, so that we know for
sure what is the machine that we are emulating.
Use pc-i440fx-1.6 regardless of the xen_platform_pci option. Add the
xen-platform device if requested. Choose slot 2 for the xen-platform
device for compatibility with current ins
When libtool support was added to configure, the new temporary files
were left out of the list of files cleaned up on exit; this results
in a lot of stale .lo files being left around in /tmp. Worse, libtool
creates a /tmp/.libs directory which we can't easily clean up.
Put all our temporary files
The current behaviour of tap_open for BSD systems differ greatly from
it's Linux counterpart. Since FreeBSD supports interface renaming and
tap device cloning by opening /dev/tap, implement a FreeBSD specific
version of tap_open that behaves like it's Linux counterpart.
This is specially important
This three patches allow FreeBSD Xen Dom0 to use Qemu (i.e., launch
HVM guests).
First patch fixes the usage of ENODATA, which doesn't exist on FreeBSD
and is replaced with ENOENT instead.
The second patch is more controversial probably, since it introduces a
FreeBSD specific version of tap_open
ENODATA doesn't exist on FreeBSD, so ENODATA errors returned by the
hypervisor are translated to ENOENT.
Also, the error code is returned in errno if the call returns -1, so
compare the error code with the value in errno instead of the value
returned by the function.
Signed-off-by: Roger Pau Monn
On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:
http://xenbits.xen.org/people/royger/test_poll.
From: Markus Armbruster
Signed-off-by: Markus Armbruster
Reviewed-by: Richard W.M. Jones
Signed-off-by: Stefan Hajnoczi
---
block/ssh.c | 34 +-
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/block/ssh.c b/block/ssh.c
index 18186ba..26078c4 100
From: Markus Armbruster
Open and create methods must set an error when they fail.
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/sheepdog.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/block/sheepdog.c b/bloc
From: Markus Armbruster
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/sheepdog.c | 20 +---
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/block/sheepdog.c b/block/sheepdog.c
index b932d68
From: Markus Armbruster
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/sheepdog.c | 35 +--
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/block/sheepdog.c b/block/sheepdog
From: Markus Armbruster
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
do_drive_del() is an HMP command that won't be converted to QMP (we'll
create a new QMP command instead). It uses both qerror_report() and
From: Markus Armbruster
Signed-off-by: Markus Armbruster
Reviewed-by: Richard W.M. Jones
Signed-off-by: Stefan Hajnoczi
---
block/ssh.c | 23 ++-
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/block/ssh.c b/block/ssh.c
index 1df1946..18186ba 100644
--- a/bl
From: Markus Armbruster
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/sheepdog.c | 77
1 file changed, 55 insertions(+), 22 deletions(-)
diff --git a/block/sheepd
From: Markus Armbruster
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/sheepdog.c | 18 ++
1 file changed, 10 insertions(+), 8 deletions(-)
diff --git a/block/sheepdog.c b/block/sheepdog.c
index ff0aa89..
From: Markus Armbruster
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/sheepdog.c | 20 +++-
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/block/sheepdog.c b/block/sheepdog.c
index d01cc88
From: Markus Armbruster
Completes the conversion to Error started in commit 015a103^..d5124c0.
Signed-off-by: Markus Armbruster
Reviewed-by: Richard W.M. Jones
Signed-off-by: Stefan Hajnoczi
---
block/ssh.c | 47 ++-
1 file changed, 22 insertions(+
From: Fam Zheng
This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.
The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so th
From: Markus Armbruster
Completes the conversion of the open method to Error started in commit
015a103.
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/vvfat.c | 16 +---
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git
On Fri, 23 May 2014 19:11:49 +0400
Andrey Korolyov wrote:
> On Wed, May 21, 2014 at 3:29 PM, Igor Mammedov wrote:
> > Adds an optional subsection that allows to migrate current
> > state of acpi_memory_hotplug of ACPI PM device.
> >
> > Signed-off-by: Igor Mammedov
> > ---
> > v2:
> > * use s
From: Markus Armbruster
Continues the conversion of the open method to Error started in commit
015a103.
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/vvfat.c | 18 +++---
1 file changed, 7 insertions(+), 11 deletions(-)
diff --
From: Markus Armbruster
libssh2_session_last_error() already returns the error code.
Signed-off-by: Markus Armbruster
Reviewed-by: Richard W.M. Jones
Signed-off-by: Stefan Hajnoczi
---
block/ssh.c | 9 -
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/block/ssh.c b/bloc
From: Markus Armbruster
Signed-off-by: Markus Armbruster
Reviewed-by: Richard W.M. Jones
Signed-off-by: Stefan Hajnoczi
---
block/ssh.c | 68 -
1 file changed, 49 insertions(+), 19 deletions(-)
diff --git a/block/ssh.c b/block/ssh.c
From: Markus Armbruster
qerror_report() is a transitional interface to help with converting
existing HMP commands to QMP. It should not be used elsewhere.
Replace by error_report().
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
-
From: Fam Zheng
We need to handle the coming backing_blocker properly, so don't open
code the assignment, instead, call bdrv_set_backing_hd to change
backing_hd.
Signed-off-by: Fam Zheng
Reviewed-by: Jeff Cody
Signed-off-by: Stefan Hajnoczi
---
block.c| 6 ++
block/stream.c | 4 +
From: Markus Armbruster
Completes the conversion to Error started in commit 015a103^..d5124c0,
except for a few bugs fixed in the next commit.
Cc: MORITA Kazutaka
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/sheepdog.c | 40 --
From: Fam Zheng
This is the common but non-trivial steps to assign or change the
backing_hd of BDS.
Signed-off-by: Fam Zheng
Reviewed-by: Stefan Hajnoczi
Reviewed-by: Jeff Cody
Signed-off-by: Stefan Hajnoczi
---
block.c | 36 +++-
include/block/
From: Fam Zheng
The above bdrv_set_backing_hd already does this.
Signed-off-by: Fam Zheng
Reviewed-by: Jeff Cody
Signed-off-by: Stefan Hajnoczi
---
block.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/block.c b/block.c
index aa9b5ab..a517d72 100644
--- a/block.c
+++ b/block.c
@@ -11
From: Max Reitz
Currently, test 089 uses $QEMU_IMG info manually in order to obtain the
according output. However, the iotests should generally use _img_info as
this filters out more irrelevant information such as the host image size
or format specific information. Therefore, test 089 should use
From: Fam Zheng
It makes no sense to check for "any" blocker on bs, we are here only
because of the mechanical conversion from in_use to op_blockers. Remove
it now, and let the callers check specific operation types. Backup and
mirror already have it, add checker to stream and commit.
Signed-off
From: Markus Armbruster
Completes the conversion to Error started in commit 015a103^..d5124c0.
Cc: Josh Durgin
Signed-off-by: Markus Armbruster
Reviewed-by: Eric Blake
Signed-off-by: Stefan Hajnoczi
---
block/rbd.c | 71 +
1 file c
From: Leandro Dorileo
Cover basic aspects and API usage for QemuOpt. The current implementation
covers the API's planned to be changed by Chunyan Liu in his QEMUOptionParameter
replacement/cleanup job.
Other APIs should be covered in future improvements.
Signed-off-by: Leandro Dorileo
Signed-o
From: Fam Zheng
BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
elements. Each list is a list of blockers of an operation type
(BlockOpType), that marks this BDS as currently blocked for a certain
type of operation with reason errors stored in the list. The rule of
usage
From: Fam Zheng
The current flow of canceling a thread from THREAD_ACTIVE state is:
1) Caller wants to cancel a request, so it calls thread_pool_cancel.
2) thread_pool_cancel waits on the conditional variable
elem->check_cancel.
3) The worker thread changes state to THREAD_DONE once
From: Fam Zheng
We should allow testing this on tmpfs. Any cache setting in iotests
should try to obey $CACHEMODE.
The cache mode is still "none" by default but overridable
Signed-off-by: Fam Zheng
Signed-off-by: Stefan Hajnoczi
---
tests/qemu-iotests/091 | 6 --
1 file changed, 4 insert
From: Kevin Wolf
This triggers if bs->drv becomes NULL in a concurrent request. This is
currently only the case when corruption prevention kicks in (i.e. at
most once per image, and after that it produces I/O errors).
Signed-off-by: Kevin Wolf
Signed-off-by: Stefan Hajnoczi
---
block/qcow2-cl
From: Fam Zheng
This adds the enum of all the operations that can be taken on a block
device.
Signed-off-by: Fam Zheng
Reviewed-by: Benoit Canet
Reviewed-by: Jeff Cody
Reviewed-by: Stefan Hajnoczi
Signed-off-by: Stefan Hajnoczi
---
include/block/block.h | 19 +++
1 file cha
The following changes since commit 178ac111bca16c08a79b2609ebdc75197bea976a:
Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into staging
(2014-05-22 19:04:49 +0100)
are available in the git repository at:
git://github.com/stefanha/qemu.git tags/block-pull-request
for you to
On 23 May 2014 13:54, Peter Maydell wrote:
> On 23 May 2014 01:41, Edgar E. Iglesias wrote:
>> From: "Edgar E. Iglesias"
>>
>> Hi,
>>
>> I've been doing some work on modeling parts of EL2 and 3 + some of
>> the system-wide virtualization features for ARMv8. A lot is missing
>> but I've got a ser
On Fri, May 16, 2014 at 11:00:07AM +0200, Markus Armbruster wrote:
> qerror_report() is a transitional interface to help with converting
> existing HMP commands to QMP. It should not be used elsewhere. This
> series purges it from the block subsystem.
>
> It is based on Fam's "[PATCH v19 00/16]
From: "Edgar E. Iglesias"
Signed-off-by: Edgar E. Iglesias
Message-id: 1400805738-11889-7-git-send-email-edgar.igles...@gmail.com
---
target-arm/cpu.h | 8
target-arm/translate.h | 6 +-
2 files changed, 5 insertions(+), 9 deletions(-)
diff --git a/target-arm/cpu.h b/target-
Hi; these patches are intended to replace patches 4, 5 and 6
in Edgar's v4 "target-arm: Preparations for A64 EL2 and 3"
series. They fix some bugs I noticed when I was testing
that series:
* missing changes for SRS
* changes not bisectable due to earlier patch making
assumptions about mmu inde
The SRS instruction was using a hardcoded 0 for the memory
accesses. This happens to be OK since the SRS instruction is
UNPREDICTABLE in User and System modes, but is awkward if we
want to rearrange the MMU index uses. Switch to using
get_mem_index() like all the other accesses.
Signed-off-by: Pet
Clean up the mmu index handling for ldrt/strt insns: instead
of a flag 'user' indicating whether to treat the store as user
mode or not, use 'memidx' to indicate the correct memory index to use.
Signed-off-by: Peter Maydell
---
target-arm/translate.c | 29 +
1 file ch
1 - 100 of 242 matches
Mail list logo
