Re: [Qemu-devel] [PATCH v7 12/15] hw/timer: Replace fprintf(stderr, "*\n" with error_report()
Philippe Mathieu-Daudé writes: > On 02/02/2018 03:37 PM, Markus Armbruster wrote: >> From: Alistair Francis >> >> Replace a large number of the fprintf(stderr, "*\n" calls with >> error_report(). The functions were renamed with these commands and then >> compiler issues where manually fixed. >> >> find ./* -type f -exec sed -i \ >> 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N;N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N;N; {s|fprintf(stderr, >> "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> find ./* -type f -exec sed -i \ >> 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ >> {} + >> >> Some lines where then manually tweaked to pass checkpatch. >> >> Signed-off-by: Alistair Francis >> >> Conversions that aren't followed by exit() dropped, because they might >> be inappropriate. >> >> Signed-off-by: Markus Armbruster >> --- >> hw/timer/xilinx_timer.c | 10 +- >> 1 file changed, 5 insertions(+), 5 deletions(-) >> >> diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c >> index 59439c05be..2d658b5791 100644 >> --- a/hw/timer/xilinx_timer.c >> +++ b/hw/timer/xilinx_timer.c >> @@ -127,7 +127,7 @@ timer_read(void *opaque, hwaddr addr, unsigned int size) >> break; >> >> } >> -D(fprintf(stderr, "%s timer=%d %x=%x\n", __func__, timer, addr * 4, r)); >> +D(error_report("%s timer=%d %x=%x", __func__, timer, addr * 4, r)); > > Not sure what we gain here, since those aren't error messages but trace > event. > Can you drop this patch from your series? I'll convert to tracepoints > and send a patch for this file. Done. Thanks!
Re: [Qemu-devel] [PATCH v7 12/15] hw/timer: Replace fprintf(stderr, "*\n" with error_report()
On 02/02/2018 03:37 PM, Markus Armbruster wrote: > From: Alistair Francis > > Replace a large number of the fprintf(stderr, "*\n" calls with > error_report(). The functions were renamed with these commands and then > compiler issues where manually fixed. > > find ./* -type f -exec sed -i \ > 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N;N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N;N; {s|fprintf(stderr, > "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' > \ > {} + > find ./* -type f -exec sed -i \ > 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > find ./* -type f -exec sed -i \ > 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ > {} + > > Some lines where then manually tweaked to pass checkpatch. > > Signed-off-by: Alistair Francis > > Conversions that aren't followed by exit() dropped, because they might > be inappropriate. > > Signed-off-by: Markus Armbruster > --- > hw/timer/xilinx_timer.c | 10 +- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c > index 59439c05be..2d658b5791 100644 > --- a/hw/timer/xilinx_timer.c > +++ b/hw/timer/xilinx_timer.c > @@ -127,7 +127,7 @@ timer_read(void *opaque, hwaddr addr, unsigned int size) > break; > > } > -D(fprintf(stderr, "%s timer=%d %x=%x\n", __func__, timer, addr * 4, r)); > +D(error_report("%s timer=%d %x=%x", __func__, timer, addr * 4, r)); Not sure what we gain here, since those aren't error messages but trace event. Can you drop this patch from your series? I'll convert to tracepoints and send a patch for this file. > return r; > } > > @@ -135,8 +135,8 @@ static void timer_enable(struct xlx_timer *xt) > { > uint64_t count; > > -D(fprintf(stderr, "%s timer=%d down=%d\n", __func__, > - xt->nr, xt->regs[R_TCSR] & TCSR_UDT)); > +D(error_report("%s timer=%d down=%d", __func__, > + xt->nr, xt->regs[R_TCSR] & TCSR_UDT)); > > ptimer_stop(xt->ptimer); > > @@ -160,7 +160,7 @@ timer_write(void *opaque, hwaddr addr, > addr >>= 2; > timer = timer_from_addr(addr); > xt = &t->timers[timer]; > -D(fprintf(stderr, "%s addr=%x val=%x (timer=%d off=%d)\n", > +D(error_report("%s addr=%x val=%x (timer=%d off=%d)", > __func__, addr * 4, value, timer, addr & 3)); > /* Further decoding to address a specific timers reg. */ > addr &= 3; > @@ -197,7 +197,7 @@ static void timer_hit(void *opaque) > { > struct xlx_timer *xt = opaque; > struct timerblock *t = xt->parent; > -D(fprintf(stderr, "%s %d\n", __func__, xt->nr)); > +D(error_report("%s %d", __func__, xt->nr)); > xt->regs[R_TCSR] |= TCSR_TINT; > > if (xt->regs[R_TCSR] & TCSR_ARHT) >
[Qemu-devel] [PATCH v7 12/15] hw/timer: Replace fprintf(stderr, "*\n" with error_report()
From: Alistair Francis Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster --- hw/timer/xilinx_timer.c | 10 +- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/hw/timer/xilinx_timer.c b/hw/timer/xilinx_timer.c index 59439c05be..2d658b5791 100644 --- a/hw/timer/xilinx_timer.c +++ b/hw/timer/xilinx_timer.c @@ -127,7 +127,7 @@ timer_read(void *opaque, hwaddr addr, unsigned int size) break; } -D(fprintf(stderr, "%s timer=%d %x=%x\n", __func__, timer, addr * 4, r)); +D(error_report("%s timer=%d %x=%x", __func__, timer, addr * 4, r)); return r; } @@ -135,8 +135,8 @@ static void timer_enable(struct xlx_timer *xt) { uint64_t count; -D(fprintf(stderr, "%s timer=%d down=%d\n", __func__, - xt->nr, xt->regs[R_TCSR] & TCSR_UDT)); +D(error_report("%s timer=%d down=%d", __func__, + xt->nr, xt->regs[R_TCSR] & TCSR_UDT)); ptimer_stop(xt->ptimer); @@ -160,7 +160,7 @@ timer_write(void *opaque, hwaddr addr, addr >>= 2; timer = timer_from_addr(addr); xt = &t->timers[timer]; -D(fprintf(stderr, "%s addr=%x val=%x (timer=%d off=%d)\n", +D(error_report("%s addr=%x val=%x (timer=%d off=%d)", __func__, addr * 4, value, timer, addr & 3)); /* Further decoding to address a specific timers reg. */ addr &= 3; @@ -197,7 +197,7 @@ static void timer_hit(void *opaque) { struct xlx_timer *xt = opaque; struct timerblock *t = xt->parent; -D(fprintf(stderr, "%s %d\n", __func__, xt->nr)); +D(error_report("%s %d", __func__, xt->nr)); xt->regs[R_TCSR] |= TCSR_TINT; if (xt->regs[R_TCSR] & TCSR_ARHT) -- 2.13.6